Obdelovalni center

Homag BMG311 Venture 316XXL

Stanje: rabljeno, številka stroja/vozila: 008438, Maksimalna širina panela: 4500 mm Maksimalna dolžina panela: 4500 mm Maksimalni iztek glavnega žaginega lista: 50 mm Dsdpfx Asyngy Sebgoci Število vpenjalnih klešč: 8

Stanje: rabljeno, Leto izdelave: 2023, Used installation Year of construction: 2023 Condition: as new, system has only a few operating hours Equipment and technical data: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs, each 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief area: 0.84 m² (bursting disks) - Base frame with discharge hopper and rotary valve; dry discharge system with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; including pressure relief area and Dry discharge system with C-coupling; without filters and control system; including pressure transducers - ECO JET DUO 6 ZWR XL – 1100 MM: Extension ring for increasing height/expansion with 2 suction inlets for extraction stubs - Substructure with discharge hopper and built-in rotary valve 960/1 FG: For chip disposal via customer-provided transport fan into an existing silo or similar; Transport duct DN 200 mm, approx. 1,260 mm length under rotary valve; connection to customer’s transport duct Rotary valve certified according to ATEX directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/construction: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* No. of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C Dcjdpfx Abjyk I U Ajgei *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category ‘M’ – electrically conductive; 2.50 m length, incl. support cages; 77.6 m² filter area - Suction stub 400 mm: with non-return flap in rectangular duct - ECO JET non-return flap 910x346x500 mm - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; suitable power modules and controls as well as the frequency converter are included in the base unit; the frequency converter is installed in the control cabinet. Cascade control with frequency converter handover: Fan 1 runs on the frequency converter; when the threshold value is reached, it switches to mains operation; fan 2 takes over the frequency converter and adjusts as required. Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault message Display of fault message in clear text on the display and collective fault lamp on the door Manual start of discharge via display button Start cleaning via differential pressure Manual cleaning start via button Post-cleaning Fire protection monitoring

Stanje: rabljeno, Leto izdelave: 2008, without briquetting press Filter area 32 m² with hopper transition to container or connection to rotary valve Used, excellent condition, low operating hours Manufacturer: Schuko Model: Vacomat 300 Year of manufacture: 2008 Clean air unit / negative pressure GS dust-tested, BIA-certified CE type-certified Motor: 7.5 kW Connection diameter: 300 mm Pressure (Pa): 3090 Air flow rate: 5,800 m³/h Control panel Filter pressure monitor Extinguishing system: powder extinguisher New price approx. €17,000.00 Djdpfx Asvxlqmebgoci Space requirement approx. 3,600 x 1,590 x 2,550 mm / 4,400 mm without hopper Location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty

Stanje: novo, Glazing Bead Nailer “2 P Jumbo automatic E.C.” – new – Your Benefits: - Corner joints are fully closed - No open glazing bead joints - No color mismatches when painting - Glazing bead frames easy to allocate Corner Stapling Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; Equipped with angle stop, top and front clamping device. Pressure can be adjusted separately. Insertion of parallel and stacked staples possible via electronic program control. Stapler unit can be mounted on a suitable work table, Operated via foot pedal. ----- Price for this configuration on request! Plus statutory VAT and packaging/shipping costs ----- Images show the 2P Corner Stapling Machine with the optional mobile work table (see surcharge details below) Surcharges: ----- Mobile Work Table: Height adjustable from 700 - 1000 mm, 2 removable support rails, 1000 mm long, 2 pivoting and sliding support rails, 1000 mm, support rails covered with felt, 4 swivel castors, 2 with locking device. ----- Surcharge: 1,311.00 EUR net Staples: Packages 15 mm staples (pack of 2000): Price 22.00 EUR 12 mm staples (pack of 3000): Price 32.00 EUR 10 mm staples (pack of 3000): Price 32.00 EUR Dcjdpfjvnh T Nsx Abgsi Dimensions and Weights ----- Jumbo Automatic E.C: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices are net, plus VAT. Ex-works, plus packaging and shipping. (Technical data as per manufacturer – without obligation!)

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Galvanized sheet steel construction - Space-saving due to compact design - Delivered ready for operation - ATEX – Pressure surge resistance tested by FSA - Low energy consumption with high performance through clean-air side mounted high-performance fan with special impeller - Energy-saving motor, efficiency class IE4 - 4 large-volume collection containers, with liner bags - High safety and long service life due to certified filter media with test certification - Compressed air pulse cleaning ("Jet" cleaning) with time-controlled automation, for filter surface regeneration - PLC control with display, for 4 slide valves EPN 24V DC, 4 machine start contacts, and 1 input for external start automation (additional slide valve control available at extra cost) - Connection cable, 5 m length, with plug Dcodsx H Dahopfx Abgji - Automatic fire suppression system with special extinguishing agent container (no connection to water network required) - The extinguishing agent (ABC powder) is not suitable for fires involving metals or cooking fats and oils - Non-return flap, type-tested - Manufactured according to DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - Passed GS-HM-03 "H3" test - IE5 efficiency powerpack - Start-up slide valve control: Z 16 - Motor power: 11 kW - Rated air flow (Vnenn): 6927 m³/h at 20 m/s - Max. air flow (Vmax): 8000 m³/h - Negative pressure at Vnenn: approx. 3100 Pa - Negative pressure at Vmax: approx. 2300 Pa - Collection volume: 495 l - Sound pressure level: < 73 dB(A) - Extraction port diameter: 350 mm Dimensions: 3930 x 1030 x 2560 mm Weight: approx. 1080 kg Original price over €30,000 Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, številka stroja/vozila: 007875, Maks. širina panela: 3800 mm Maks. dolžina panela: 2200 mm Maks. izstop glavnega žaginega lista: 130 mm Število vpenjalnih čeljusti: 7 Dcjdpfjwkf Axex Abgoi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 3.000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 vacuum cups, side and longitudinal positioning pins, LED position display for vacuum cups Venture 316 Future Package 10 lift rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece lengths: All units, single: 3300 mm; pendulum max.: 1740 mm Tool diameter 25 mm: single 3475 mm; pendulum max.: 1915 mm – Workpiece width: Front stop: 950 mm, all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping fixtures – Up to 60 mm with standard clamps SAFETY AND PROTECTION FEATURES: EC-compliant; SAFETY FENCE ON RIGHT WITH DOOR Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer, side-mounted Drilling head with 16 spindles (vertical 12 / horizontal 4 / none at 90°) AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE CHANGER SOFTWARE FOR POSITION MEASUREMENT AND ROTATION OF CNC COORDINATES TOOL TRANSFER STATION Dedpfx Absy E Npfogeci COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 m3/h Powerclamp pneumatic package Control: POWERCONTROL PC85 with POWERTouch control system; IPC PowerPack, Operator pedestal for program start; camera system with tablet PC WOODWOP CAD/CAM INTERFACE STANDARD Documentation and control texts: German Delivery includes only the pictured tools and HSK holders!

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Leto izdelave: 1991 Dcedpsy R Ha Sofx Abgoi Oprema in tehnični podatki: - popolnoma nameščen sušilnik z vozičkom, zmogljivim radialnim ventilatorjem, električnim grelcem, - dovodne in odvodne lopute, varnostni termostat, razpršilna naprava - dvižna nihajna vrata za praktično odpiranje in zapiranje sušilnika - notranja obloga: vse stranske stene iz posebnega aluminija, odpornega na morsko vodo - tla iz nerjavnega jekla so trajno odporna proti agresivnim vsebnostim lesa, kot so tanini ipd. - tesnjenje spojnih rež je popolnoma obstojno in omogoča tudi parjenje v napravi - dimenzije zloženega sv. dela: 530 x 105 x 115 cm - volumen zlaganja: 6,4 m³ - zunanje mere: cca 690 x 140 x 200 cm - grelna moč: 12 kW - motor: 1,1 kW / 400 V - z upravljanjem MP 902 Razpoložljivost: takoj Lokacija: 63934 Röllbach

Leto izdelave: 2025, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, 2025 BCAMCNC 5-osni CNC rezkalni stroj – kot nov, nikoli uporabljen Naprodaj je 2025 BCAMCNC 5-osni CNC rezkalni stroj, ki je bil vgrajen, vendar nikoli vključen v proizvodnjo. Stroj je v brezhibnem, skoraj novem stanju, kar je odlična priložnost za nakup visoko zmogljivega, najsodobnejšega 5-osnega rezkalnega stroja brez čakalnih dob in stroškov nove enote. BCAMCNC 5-osni rezkalni stroj je zasnovan za izjemno natančno obdelavo zahtevnih kosov, primeren za panoge, kot so letalska in avtomobilska industrija, pohištvena industrija, izdelava plovil, izdelava napisov, izdelava modelov in napredni kompoziti. ✅ Ključne značilnosti in prednosti • 5-osna CNC obdelava – popolnoma sočasna interpolacija za kompleksne 3D obdelovance • Kot nov – nameščen, a nikoli uporabljen • Težka varjena konstrukcija za stabilnost in dolgoročno natančnost • Visokohitrostno vreteno za učinkovito rezanje različnih materialov • Avtomatski menjalnik orodij (ATC) za maksimalno produktivnost • Uporabniku prijazen CNC krmilnik z napredno programsko integracijo • Vakuumska miza za zanesljivo vpenjanje obdelovancev • Odličen za les, plastiko, kompozite, pene, aluminij in barvne kovine 📐 Tehnične specifikacije (2025 BCAMCNC 5-osni CNC rezkalni stroj) • Velikost mize: 3000 × 1500 mm • Pomik X-osi: 3000 mm • Pomik Y-osi: 1500 mm • Pomik Z-osi: 1200 mm • Rotacija A-osi: ±120° • Rotacija C-osi: ±360° neprekinjeno • Vreteno: 9 kW visokofrekvenčno HSD (18.000 vrt./min) • Menjalnik orodij: 8-pozicijski avtomatski menjalnik orodij (ATC) Dodpfoxddk Sjx Abgsci • Pogonski sistem: Servo motorji s poševnim zobatim letev in zobnikom (X/Y), kroglični vreteno (Z) • Miza: Vakuumska miza z zmogljivo 7,5 kW črpalko, večconsko vpenjanje • Krmilni sistem: industrijski CNC krmilnik Syntec 610MA-ES • Največja hitrost rezanja: do 25 m/min • Ponovljivost: ±0,05 mm • Napajanje: 380V / 50Hz 📦 Vključeno s strojem • Pripravljeno za priklop na odsesovanje • Orodni paket vključen • Dokumentacija in navodila 🌍 Stanje • Nameščen, a nikoli uporabljen – stroj je kot nov • Model 2025 – najnovejša generacija tehnologije • Takoj dobavljiv – brez čakalnih dob 🔑 Povzetek To je redka priložnost za nakup novega 2025 BCAMCNC 5-osnega CNC rezkalnega stroja v neuporabljenem stanju. Z možnostjo popolne 5-osne obdelave, robustno konstrukcijo in natančnim krmiljenjem je to idealna rešitev za podjetja, ki potrebujejo visoko natančnost in produktivnost pri obdelavi zahtevnih 3D kosov. Opomba: *Specifikacije so podane v dobri veri, vendar niso zagotovljene*

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: Dcjdpfxjfyadbs Abgei • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg