1800150 Glava za skobljanje Hapro za nože za skobljanje s trakovi

Hapro

Stanje: rabljeno, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel boring machine, drilling gearbox - Number of spindles: max. 3 drills - Mount: M8 - Direction: alternating right/left rotation - Drill spacing: 25 mm, offset (see photo) - Quantity: 3 drilling heads available - Price: per unit - Dimensions: 90/85/H70 mm - Weight: 1.6 kg/unit Lsdof S T Iwjpfx Abbjrg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: nepreverjeno, Delovna površina mize: 3250 x 1500 mm Razdalja med stojali: 3350 / 1200 mm Dolžina/širina batnice: 3250 x 1500 mm Podajanje: 1000 mm Gibanje zapiranja: 300 mm Hod bata: 200 mm Smer prehoda: levo - desno Razdalja med spodnjim robom bata in zgornjim robom stola stiskalnice: 450 mm Profil sredinskega dela TS: 100 x 100 mm Profil končne dele TS: 100 x 100 mm Največja notranja razdalja TS: 1000 mm Najmanjša: 400 mm Ljdpox Sv Nxefx Abborg Največja transportna masa: 100 kg Največje število hodov: 32 hodov/min. Tlačna sila: 4100 kN

Stanje: rabljeno, Ta ponudba je za Schott Halogen HT2 grelno-mešalno ploščo. Lrsdpfx Aoxv Aa Nobbsg Enota je v popolnoma delujočem stanju in je pripravljena za takojšnjo uporabo. Ključne funkcije in specifikacije: Čeprav natančne vrednosti za oznako "HT2" niso široko objavljene, podani model SLR Halogen daje zelo dober prikaz značilnih zmogljivosti: Grelna površina: steklena/keramična zgornja plošča (premer ≈16 cm po enem oglasu). Maksimalna temperatura površine plošče: do ~500 °C. Obseg mešanja: približno 10 – 1.100 obr/min (po enem oglasu). Kompaktne mere: po enem oglasu približno 24 × 37 × 9 cm (Š×D×V). Primerna za uporabo z nastavkom (retortna palica).

Stanje: dober (rabljeno), Multi-spindle head, multi-spindle drilling head, dowel drilling head, hardware drilling head - Dimensions: 190/85/75 mm - Drilling distance: 26 mm Lrsdpfx Ajb A I Ulobbsg - Central drill: 5 mm offset - Quantity: 1 drill head available - Price: per piece - Weight: 2 kg/piece

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Technical data: Operating pressure: 6–10 bar, dry, filtered air Compressed air connection: ø 10–12 mm Maximum delivery pressure: 5 bar Delivery rate: 60 kg/h Abrasive types: Dry garnet sand 60–200 mesh Compressed air consumption: Max. 0.5 m³/h at 4 bar operating pressure Weight: 200 kg (empty) Electrical connection: AC 240 V / 50 Hz / max. 20 A Dimensions (H x W x D): 2350 x 860 x 610 mm Lredpfx Abju Rb D Rjbog

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well-designed principle with powerful impact. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well-designed principle with powerful impact. + Up to 40% energy savings compared to conventional systems, eligible for investment subsidies + High energy efficiency: servo direct drive, no reactive power, low and flexible power consumption + Low connection power required: no power consumption when the waterjet system is idle, suitable for operations with limited energy supply + 3-piston plunger pump: high flow rate and efficiency of up to 98%, replaces 6000 bar technology, extended maintenance intervals, simple design, no hydraulic system, no warm-up or ramp-up phase – ready to operate immediately + Continuous pressure regulation and integrated pulsation damping: continual adjustment of cutting pressure to the target value – no pressure fluctuations, higher cutting speed compared to pressure intensifiers in equivalent configurations Lrjdpfx Abou Hz Tqobeg + Lowest noise level at 75 dB: premium complete system with soundproof enclosure + Universally applicable to all waterjet cutting machines and brands

Stanje: novo, SCM Olimpic 500 HT – Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 – Version "HP T-ER2" - "eye-S" control console (control panel) - Human-Machine Interface software (HMI) "Maestro active edge" - Fine milling and radius scraper unit, radius = 1 mm - Fine milling and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence Lodpfx Abswkf Iheberg - "SAVENERGY" kit - Interior lighting for the cabin and gluing area - "Nesting" tracing rollers - Separator agent spraying unit "AAR" 1 - Edge finishing spray device - Spray device for delicate edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit: 3 automatic settings straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is new and still in its original packaging. Special offer demonstration machine at a discounted price.

Stanje: rabljeno, Leto izdelave: 2008, USED PLASTIC INJECTION MOULDING MACHINE, brand HT 1200-GOLD (Italy), year 2008 A PLASTIC INJECTION MOULDING PRESS by HT MIR model 1200-GOLD (Italy) Lsdsvw A Hpepfx Abbjrg Clamping force: 1200 tons / Ejection force: 215 tons Movable platen stroke: 1300 mm Tie bar spacing: 1250 x 1250 mm Serial number: 0807120018756 / Year: 2008 Total motor power: 163.55 kW / 400 V Clamping force: 1200 tons Approximate weight: 33,000 kg

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: nepreverjeno, Auction of HT MIR GOLD-800 (Italy) PLASTIC INJECTION MOULDING MACHINE Used PLASTIC INJECTION MOULDING MACHINE, brand HT MIR (Italy) Model: 800-GOLD Year: 2008 Serial No.: 0807070019166 Lodpfevw A E Sox Abberg Motor: 119 kW / 400V The machine can be inspected at the factory (not in operation).