Vrtalna glava za okovje

H&T Bohrabstand 26 mm

Stanje: novo, Leto izdelave: 2025, Powder Coating – The perfect layer for lasting protection. Nodpfx Alewf Dpgstscw Powder coating is a highly effective and widely adopted method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring uniform adhesion to the surface and forming an even coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This step is essential to ensure effective bonding of the powder with the substrate, resulting in a robust and long-lasting coating. A typical powder coating system consists of several components and devices required for the application and curing of powder coatings. Powder spray booth and spray area The booth provides a controlled environment for the application process and ensures uniform powder distribution. Powder coating gun A powder coating gun is used to apply the powder coating to the workpiece. Powder supply system The powder supply system comprises a hopper or container for storing the coating material. It typically includes equipment such as powder pumps, feed hoses, and powder sieves to convey powder from storage to the spray gun. Pretreatment equipment Pretreatment systems prepare the substrate prior to powder coating application. This may involve processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimal adhesion and durability of the finish. Curing oven A curing oven is a vital component of a powder coating plant. It is used to heat the coated substrate to the appropriate temperature, allowing the powder coating to melt, flow, and cure into a durable surface. The oven commonly features a conveyor or racks to transport coated parts through the curing chamber. Exhaust system An extraction system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Stanje: skoraj kot novo (rabljeno), Manufacturer: Varian Model: NHS-35 Condition: The pump is in very good condition and, if required, is also available with angle valve! Ncedehmba Ajpfx Altow Warranty: 3 months Delivery time: ex stock

Stanje: rabljeno, Number of spindles: 4 Drilling capacity in steel (diameter): 23 mm Drilling stroke: 150 mm Total power requirement: kW Nedpfx Aet Hw U Noltecw Machine weight approx.: t Space requirement approx.: m

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Njdpfxefv Awas Altecw Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Pressure: 25 tons Outreach: 160 mm Installation height: 500 mm Table surface: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Nedpfx Ajfcw Apeltjcw Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Njdsb U Hwnepfx Altocw Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 860027, Offer 24331 Technical Data: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm - Tapping capacity up to: M16 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 - 1800 rpm, 200 - 3600 rpm - Motorized movement of the drilling unit - Motorized table clamping in X + Y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V Nedpeu Aq Amofx Altjcw - Required space: approx. W 1750 x H 1600 x D 1000 mm - Weight: approx. 1200 kg

Leto izdelave: 2023, stanje: novo, We are selling a new double belt grinding machine. The contact wheels are available in various dimensions. Technical data: Weight: approx. 350 kg Electrical connection: see nameplate of the respective drive motor Nedpfx Aek D Ex Tjltocw Compressed air connection: 3 - 8 bar Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm Abrasive belts: max. 120 mm x 3500 mm length Extraction connection: Ø 160 mm If you have any further questions, please feel free to contact us!

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 80 t Outreach: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table surface: 830 x 610 mm Ram surface: 650 x 400 mm Gap depth (to rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - with gear-driven wheels - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection Nedpfxetycdks Altecw - ejector - central grease lubrication - cover plate for drop-through hole - stepless speed control via frequency converter - The machine will be mechanically inspected and overhauled in our facility, and will receive a new control cabinet with safety control and touchscreen - Current UVV inspection with braking time measurement

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: 185078, Offer 24435 Ncsdpout Uzaefx Altjw Technical Data: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine, make: MAXION, type: BT 15 GL - Drilling capacity up to: 18 mm - Tapping capacity up to: M 10 - Drill spindle mount: MK 2 - Drilling spindle stroke with fine depth adjustment: 90 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - 4 spindle speeds: 320 / 560 / 1000 / 1600 rpm - Motorized stroke of drilling unit - Table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Space requirement (approx.): W 1750 x H 1600 x D 1000 mm - Weight (approx.): 1200 kg - Various guiding sleeves