MIG / MAG impulzno zaščitni plinski varilni aparat, impulzna varilna naprava, impulzni varilni apara

REHM RMP 400 Hybrid (REHM-Mega-Puls)

Stanje: rabljeno, IDC000100 Popolna žaga - Valon Kone VK26M s dovodnimi in odvodnimi transporterji - sistem krožnega transporta ('merry go around') - ARIVislanda KS12 37 kW x 2 - ARI rezalnik robnih desk (slab saw) - ARI KL10 prečna žaga (split saw) - Soderhamn Eriksson 519C, robilnik z sekalnimi glavami - Bruks sekalnik 1300 Fpedpfx Ajvgdy Ajfleb Kompletno z nadzornim sistemom in mehanizacijo.

Stanje: rabljeno, Technical details: Fpedpfx Afewrq Txsljb Welding current: 500 A Length: 1200 mm Height: 1260 mm Connection rating: 26.6 kVA Connected load: 100 kW Open-circuit voltage: 65 V Machine weight approx.: 147 kg Machine dimensions: 1.2 x 0.45 x 1.2 m Welding cable with welding torch *

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), There are 20 identical welding machines available. Type: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power consumption P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Fpsdexdc Upspfx Aflob Control: Comfort 2.0, with intuitive operation via click wheel, infinitely variable pulse/spot/standard modes (especially useful for TIG welding), adjustable pulse break ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approx. 15kHz, ActivArc technology: dynamic arc regulation to ensure consistent performance during stick-out variations and to prevent electrode sticking; improved root and penetration characteristics, spotArc/Spotmatic functions for spot welding and tacking, 2-stroke/4-stroke modes selectable via torch trigger, integrated MMA welding (often with MMA-pulse automation), adjustable gas pre-flow and post-flow times, adjustable upslope/downslope times, torch modes controllable via torch trigger (e.g. reduced secondary current, etc.), memory/JOB storage: recurring welding tasks can be saved (depending on version, approx. 8-100 JOBs), energy efficiency: high efficiency, standby function available. Remote control & interfaces: Remote adjusters and function torches can be connected, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Very little used, inspection on site possible.

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Fpjdpfxowbil So Afleb Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Stanje: novo, Leto izdelave: 2025, Planer-Thicknessers and Jointers Offered by Cormak Our shop features a wide range of professional, versatile planer-thicknessers that combine stable operation with precise surface finishing—all at a competitive price point. Unlock tools that accelerate your production and enhance the quality of your wooden products, even for amateur use in home workshops. With Cormak, satisfaction is guaranteed. Construction and Operation of the Planer-Thicknesser - Table: The thicknessing table is made from high-quality, ground cast iron with a polished working surface rated at Ra 1.6. Table height is adjusted using a large, ergonomic handwheel, which can be locked in place with a quick-action eccentric lever. - Knives: The key component of a planer, these are located above or below the table and are responsible for removing excess material from the wood's surface. The knives can be mounted to a rotating cutter block or cutting head. - Motor: The planer is powered by an electric motor that delivers the energy required to drive the cutter blocks or milling head. - Cutter Block Guard: The guard can be adjusted as needed, with settings for height, angle, and extension. - Feed Mechanism: This woodworking machine is equipped with feed rollers (driving and driven), positioned very close to the cutter block, allowing even relatively short pieces to be processed. The feed rollers are chain-driven, ensuring slip-free operation (no ‘stepping’ of the workpiece). - Guides: Guides help to maintain smooth, even movement of the workpiece. The adjustable fence allows for angles anywhere between 90° and 45°. - Stability: The machine’s robust weight delivers excellent stability, providing safe, vibration-free operation thanks to additional anti-vibration feet. - Ease of Use: Adjustments are straightforward, and switching between planing and thicknessing modes takes only a few seconds. Technical Specifications for Woodworking Thickness Planer: Fjdpfx Aovxh Nxeflopb - Cutter Block Diameter [mm]: 75 - Cutter Block Speed [rpm]: 4000 - Extraction Port Diameter [mm]: 100 - Tilting Fence Angle [°]: 0 – 45 - Number of Knives: 3 - Knife Dimensions [mm]: 250x30x3 - Maximum Jointing Width [mm]: 254 - Maximum Thicknessing Width [mm]: 254 - Maximum Planing Height [mm]: 180 - Max Thicknessing Depth of Cut [mm]: 3 - Max Jointing Depth of Cut [mm]: 2.5 - Thicknesser Feed Rate [m/min]: 6 - Dimensions (L x W) [mm]: 1080 x 260 - Gross Weight [kg]: 152 - Motor Power: 2.6 kW - Power Supply: 230V

Stanje: novo, Leto izdelave: 2025, The CORMAK ZX 40BPC is a robust drill-milling machine for metalworking. It features a spindle head rotation of +/- 90 degrees, spindle head tilting of +/- 90 degrees, automatic spindle feed, right and left spindle rotation, large working table, liquid cooling, and optional automatic longitudinal table feed (X-axis). It is equipped with a powerful two-speed 1.5 kW motor and allows for drilling up to 40 mm. Spindle speeds reach up to 3200 rpm. CORMAK Product Features: - Durability – All machines and tools are manufactured from the highest quality materials, ensuring longevity and reliability in operation. - Precision – Advanced production technologies provide precise operation, essential for accuracy in metalworking tasks. - Innovation – Technical solutions applied in these products improve operational efficiency and user convenience. CORMAK is a continuously growing brand, gaining new satisfied customers worldwide in both woodworking and metalworking sectors. - Adjustable working flexibility – Thanks to the rotating head and height-adjustable design. - Threading function and reversible spindle – Enables increased versatility for various operations. - Precise depth adjustment – Via a three-arm handle and fine feed handwheel with scale. - Automatic spindle feed – For enhanced drilling precision and convenience. - Advanced oil-bath gearbox – Equipped with ground and hardened gears, ensuring smooth and durable operation. - Stable construction – Solid base guarantees secure placement and eliminates vibrations during operation. - High efficiency – Powerful motor ensures effective drilling even in hard materials. - Durable column – Precisely ground surface provides rigidity and operating accuracy. - Safety guard – Tilting clamp guard made of plexiglass for additional operator protection. - Heavy-duty cast column – Guarantees high working accuracy and long machine life. - Work table with T-slots (14 mm) – Allows quick setup of vises and other accessories. - Cooling system – Standard equipment for safe, efficient work during extended operations. Technical Specifications: Maximum Drilling Capacity (Steel/Cast Iron): 32/40 mm Max Face Milling Width: 80 mm Max End Milling Width: 22 mm Spindle Travel: 125 mm Spindle Taper: MT4 Number of Speeds: 12 Spindle Speed (rpm): 95-3200 (95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200) Max Distance from Spindle End to Table: 735 mm Max Distance from Spindle End to Base: 1245 mm Distance from Spindle to Column Surface: 272 mm Work Table Dimensions: 730x210 mm Base Dimensions: 690x520 mm Motor Power S1: 1.1/1.5 kW (1.5/2.0 PS) Motor Power S6: 1.7/2.2 kW (2.25/3.0 PS) Coolant Motor Power: 40 W Overall Dimensions (H with Base): 1200x1000x910 mm Weight: 380 kg Fpodpfx Aevxhfmsflsb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, For sale: Felder spindle moulder F-700 Z with 4 spindle speeds. This machine has been used as a display model in our showroom, making it as good as new and sold with full warranty / guarantee. Fodpjwp Ri Uefx Aflepb Technical data: - 4 spindle speeds - Spindle can be tilted from 90° to 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power: 5.5 kW / 7.5 HP with star-delta start - Year of manufacture: 2023 / like new The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Information Tel.: 03137-3109 Related terms: spindle moulder, milling machine, moulders Reference: R-D1618

Stanje: rabljeno, Magnetic drilling machine, hand-held drill Fedpjfc R D Ajfx Afljpb - Magnetic base: Magnetor type PS 32 L - Drill unit: AEG type HBE-IV - Shank: Morse taper 2 (MT2) - Max. drill diameter: Ø 23 mm - Power supply: 265 V / 200 Hz - Dimensions: 700 x 300 x H 670 mm - Weight: 49 kg

Stanje: rabljeno, Technical details: Welding current: 520 A Length: 1200 mm Height: 1100 mm Machine weight approx.: 147 kg Dimensions (L x W x H): 1.2 x 0.75 x 1.1 m Fpedpfewc R Udex Aflob Welding process: TIG/E/MIG-MAG Scope of delivery includes: Welding transformer, wire feeder, cooling unit Protection class: IP23C Insulation class: B/H

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. Fpedpswbknbjfx Afleb ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.