Tračna žaga

FMB Phoenix+G

Stanje: novo, NEBES TM 275 Bandsaw – 400 V Three Phase, NEW “CE” - INDUCTION motor - Cast iron frame - Adjustable cutting angle from 0° to 60° - Entire structure made of cast iron - Electric pump for blade lubrication and cooling - Oil-bath blade tension gauge - Front controls and two cutting speeds - Coolant pump bypass switch - Blade guide with hard metal (H.M.) pads Cutting capacities: - Round at 0°: 220 mm - Square at 0°: 200 x 200 mm - Flat at 0°: 230 x 185 mm - Round at 45°: 150 mm - Square at 45°: 150 x 150 mm - Flat at 45°: 150 x 200 mm - Round at 60°: 90 mm - Square at 60°: 90 x 90 mm Psdpfxsh Nm Ncj Agxogk - Flat at 60°: 90 x 120 mm - Power: 1.3 HP - Voltage: 400 V - Blade size: 2450 x 27 x 0.90 mm - Weight: 265 kg

Stanje: novo, MIG/MAG - Pulzni MIG/MAG - TIG DC HF - Elektrodno varjenje Pjdpfxeyrfd Ro Agxsgk Enofazna napajalna napetost 1x230V Inverterska tehnologija greenWave® Vgrajena enota za podajanje žice 9 inovativnih varilnih postopkov Böhler Welding 3,5'' barvni LCD upravljalni panel 220A pri 35% (40°C) 23,7 kg

Leto izdelave: 1985, stanje: delavnici obnovljeno (rabljeno), Technische Daten: Drahtdurchmesserbereich: 4–12 mm Gscxckebw Pgedpfx Agjh In Thoxok Ablauftisch: 4 m Geschwindigkeit: 80 m/min Generalüberholung: 2022

Stanje: novo, Leto izdelave: 2026, The CORMAK HBS260 bandsaw for cutting pipes, profiles and bars is widely used in all metalworking workshops where precision, quality and cutting speed are important. This model is equipped with a swiveling arm adjustable from 0–60°. The robust frame construction ensures precise and quiet operation. It features a removable chip tray for easy cleaning! Machine Features The horizontal metal bandsaw with a swiveling arm allows perpendicular cuts as well as angled cuts in the range of 0 to 60°. Material can be fed manually or via any mechanical device, while the blade feed is automatic. The blade guides are equipped with special carbide plates and bearings. This greatly enhances blade tracking, blade life, cutting accuracy, and cut quality. Carbide guidance significantly reduces wear on both the machine and the blade. The machine is equipped with an efficient coolant pump with a closed circuit system. The saw arm is made from a single cast iron piece, and together with the 27 mm wide blade used in this saw, it allows reliable, repeatable serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and features a quick clamp. The blade guides are equipped with carbide plates – solid carbide inserts – and a ball bearing system. It is THESE CARBIDE GUIDES that ensure the precision and straightness of the cuts. The upper surface of the base is formed as a tray for draining coolant and collecting chips generated during cutting. A cast iron work table with a swiveling arm and a control panel on a separate arm are mounted to the base. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed is provided by the downward movement of the arm. The feed speed (cutting speed) is adjustable via a hydraulic cylinder. Feed speed is adjustable from the machine's control panel. There are two selectable blade speeds: 35 and 70 m/min. After the cut is completed (when the arm reaches the lower position), the blade drive is automatically switched off. Safety is ensured by blade guards and micro-switches that cut off power to the motor at the end of the cycle or upon opening any of the covers. Additional protection includes automatic machine shutdown in the event the blade breaks. Technical Specifications: - Blade size [mm]: 2520 x 27 x 0.9 - Blade tension: Mechanical (manual) - Blade speeds [m/min]: 35, 70 - Arm descent: Stepless – hydraulic cylinder - Vise base height [mm]: 860 - Saw wheel diameter [mm]: 300 - Saw frame swivel range [°]: 0–60 - Power supply: 3 phase, 400V Pjdpfx Agoudi Uzjxsgk - Main motor power [kW]: 1.1 / 1.5 - Coolant pump motor power [kW]: 0.05 - Dimensions with base [cm]: 150 x 80 x 140 - Weight [kg]: gross/net – 210 / 180 kg Included in delivery: - 2 x M42 saw blades - 5L Emulgol coolant - Magnetic chip collector ZW580

Stanje: novo, Leto izdelave: 2026, Band Saw CORMAK HBS275 for cutting pipes, profiles, and rods is commonly used in all metalworking shops where precision, quality, and cutting speed are essential. This model features a swiveling arm from 0° to 60°, and the blade guides are based on carbide inserts. The frame design ensures accurate and quiet operation. Machine Characteristics Psdpeudi Unofx Agxogk The horizontal metal band saw with a swiveling arm enables cutting perpendicular to the axis of the material as well as at any angle from 0° to 60°. The workpiece can be fed manually or using any mechanical device, while the tool feed is automatic. The blade guides are fitted with special carbide inserts and bearings. This greatly influences the guidance of the blade, its lifespan, straightness, accuracy, and cut quality. Carbide guidance significantly reduces wear on the machine and the blade. The machine comes equipped with an efficient coolant pump in a closed-loop system. The saw arm is made from a solid cast iron casting, and together with the 27 mm wide blade used in this saw, it enables fully repeatable series cuts of both profiles and solid materials. The vise is placed on an adjustable bed and features a quick-release clamp. The blade guides are fitted with carbide plates and a roller bearing system. It is the CARBIDE GUIDES that are responsible for cutting precision and straightness. The arm is equipped with an automatic blade tension sensor and is inclined at 25 degrees, which increases blade life. A cleaning brush is mounted at the bottom of the arm for optimal blade cleanliness and functionality. The machine’s drive is transmitted via a worm gear. The base features a cast iron work table with a swiveling arm and a control panel mounted on a separate arm. During cutting, the main cutting motion is the advance of the blade, while the feed motion is the arm's descent. The descent speed of the arm (cutting speed) is controlled via a hydraulic cylinder. Feed speed is regulated on the saw's control panel. There are two cutting speeds available: 37.5 and 75 m/min. In the lowest arm position (after finishing the cut), the blade drive is switched off automatically. Safety is ensured by blade covers and micro switches that stop the motor once the cutting cycle ends or any of the covers are opened. Additional protection involves automatic shutoff of the saw in case of blade breakage. The machine’s drive is provided by a motor with a worm gear. The motor is equipped with a thermal fuse to protect against overheating during operation. Technical Data TOTAL POWER OUTPUT: 1.5 kW SUPPLY VOLTAGE: 400V 50Hz ARM DESCENT CONTROL: Hydraulic cylinder BLADE LENGTH: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (with raised arm) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity: Angle Round Rectangle Square 0º ø220 260 x 140 mm 200 x 200 mm 45º R ø160 160 x 140 mm 160 x 160 mm 60º R ø100 120 x 100 mm 100 x 100 mm Price does not apply to machines purchased in Poland.

Stanje: rabljeno, Wire diameter - max. 10 mm Wire diameter - min. 3 mm Wire length: 8 m Total power requirement: 7.5 kW Pgodpfxewu Hg Hs Agxsk Machine weight: approx. 1.1 t Space requirement (LxWxH): approx. 2.53 x 0.75 x 1.1 m

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2450 mm Cutting width: 250 mm Cutting speed: 40 / 80 m/min Saw band dimensions: 2450 x 27 x 0.9 mm Cutting capacity at 60° round: 100 mm Cutting capacity at 60° square: 90 mm Pjdpfx Aolb I A Sogxegk Cutting capacity at 60° flat: 90 x 90 mm Cutting capacity at 45° round: 160 mm Cutting capacity at 45° rectangular: 160 x 110 mm Cutting capacity at 90° rectangular: 250 x 190 mm Total power requirement: 0.75 / 1.1 kW Table height: 925 mm Machine weight: approx. 218 kg Required space: approx. 1300 x 700 x 1530 mm

Stanje: rabljeno, Leto izdelave: 1972, Technical Details: Maximum wire diameter: 12 mm Minimum wire diameter: 2.0 mm Program control: Process Controller Total connected load: 18.5 kW Approx. machine weight: 10.5 t Machine dimensions (LxWxH): 2.6 x 1.8 x 2.7 m Lubrication system dimensions (LxWxH): 0.6 x 0.4 x 0.8 m Control cabinet dimensions (LxWxH): 0.5 x 1.2 x 2.1 m Coil reel dimensions: 2.6 x 1.8 x 2.7 m WIRE STRAIGHTENING AND CUTTING MACHINE by Wafios-Hack Also referred to as a spring coiling machine, suitable for producing right- and left-hand tension and compression springs. Feed length: 17,400 mm Spring diameter: 120 mm Performance range: Output: 1 – 70 pcs/min Spring diameter: 25 – 200 mm Wire sizes: Round steel Ø 5.0 – 14.0 mm and Square steel 5.0 – 12.5 mm Max. feed speed/spring length: 42,000 mm, Wire feed F1 = 40 m/min, F2 = 28 m/min, F3 = 20 m/min Pgedpfxju Ic Hne Agxek Currently equipped with: 6 wire feed rolls for wire reception Ø 4 mm for producing the final product: tension spring with wire Ø 4 mm, outer Ø 34 mm, length 135 mm Operation via control panel, Process Controller BRANKAMP Equipment: Lubrication unit Wire payoff reel Control cabinet cooler Reel Optional accessories and/or spare parts as shown in photo As is/subject to prior sale.

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D08L/8081, Številka ponudbe: D08L/8081 Vrsta stroja: Stroj za ravnanje in rezanje žice Proizvajalec: WMW Tip: UDARA10 Leto izdelave: 1980 Razpon premera: 3–10 mm Dolžine odrezkov: 2000 mm Hitrost – metri/min: 22–71 Lokacija: Pri nas na zalogi Pgsdpfowi Svcjx Agxjk

Stanje: dober (rabljeno), Leto izdelave: 2010, Cutting diameter: 220 mm Saw band length: 2480 mm Table height: approx. 910 mm Cutting range at 90° (flat): 245 x 115 mm Cutting range at 90° (square): 195 x 195 mm Cutting range at 45° (round): 150 mm Cutting range at 45° (square): 140 x 140 mm Cutting range at 60° (round): 85 mm Cutting range at 60° (square): 85 x 85 mm Speed range: 45 + 90 m/min Pgedpfx Agjyf N D Ujxsk Saw band dimensions: 2480 x 27 x 0.9 mm Max. clamping width: 270 mm Total power requirement: 0.75 + 1.1 kW Machine weight: approx. 200 kg Space requirement: approx. 1430 x 720 x 1700 mm New price in 2010: €2,400 Special price on request Equipment: - For cutting profiles, pipes, solid ferrous and non-ferrous materials - Saw frame can be swiveled up to 60° for mitre cuts - Infinitely adjustable lowering via hydraulic lowering cylinder - Torsion-free, heavy-duty saw arm made of cast iron - 2-speed saw band for optimal cutting results (400 V) - Automatic cut-off after material separation - Robust cast-iron vice with quick clamping - Ball-bearing saw band guide with quick adjustment for adapting to workpiece width ensures optimal results - Original operating manual included