Heesemann Mfa 6 nakup rabljenega (34)

Stanje: rabljeno, Delovna širina 1.350 mm Število brusnih agregatov 2 kos Maksimalna debelina obdelovanca 150 mm Večnamenski stroj za površinsko brušenje Heesemann tip MFA 6 Impression Q2 – LF za precizno brušenje površin, furnirja, laka ter za vmesno brušenje v lesni industriji. Stroj je primeren za masiven les, obložene obdelovance in občutljive površine pri izdelavi pohištva in notranji opremi. Brezstopenjsko nastavljiv podajalni transport ter vakuumska pritrditev omogočata čist in enakomeren brusni vzorec. Njdpfxjyyc Drs Altewi Predvidena razpoložljivost od 33. tedna 2026.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm Nwsdpex Rdn Tsfx Altsi 1 Longitudinal sanding unit (with contact roller for calibration work (steel)), Diameter: 250 mm Belt speeds: approx. 18 m/s, 22 kW Anti-wear brake unit, automatic length adjustment Dust extraction device controlled according to the workpiece; reverse-running abrasive belt; abrasive grain compensation via computer. Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Incl. stepless sanding speed adjustment via electronic frequency controller, with double quantity of suction holes for the dust extraction device. Anti-wear brake unit, automatic adjustment for varying abrasive belt edge lengths, dust extraction device controlled depending on the workpiece, switchable, reverse-running abrasive belt. 2 Pressure beams with selective pressure regulation system – CSD® system Continuously adjustable pressure of individual pressure elements, for both single and multiple feed. Distance: 32 mm. Part tolerance compensation up to 2 mm by maintenance-free pressure magnets. Working width as well as start and end of sanding on the pressure beam are electronically controlled. The pressure elements are actuated by electro-lifting magnets, allowing the sanding shoe pressure to be infinitely variable as the workpiece passes through the machine. This innovative CSD® technology ensures always consistently proportional pressure depending on the shoe’s overlap on the workpiece. The risk of edge-through (“burn through”) is almost eliminated thanks to this continuous dynamic pressure control.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2007.10.191, širina brušenja: 1.350 mm, dolžina brusnega traku: 4.800 mm, višina obdelovanca (maks.): 150 mm, širina brusilnega traku: 1.400 mm, Automatic Sander + Dedusting Machine TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 – 150 mm Nwsdsyg Exqjpfx Altsi Conveyor bed: continuous conveyor belt Conveyor bed drive: 4.0 kW / inverter 7.5 kW Feed speed: 3 – 15 m/min Workpiece vacuum clamping system drive: 7.5 kW Units: 3 x cross sanding, 1 x longitudinal sanding, 1 x brushing unit Cross and Longitudinal Sanding Units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Sanding belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Sanding belt speed longitudinal: 1.8 – 16 m/s Drive power longitudinal: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing Unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air Requirements Air requirement cross sanding units: 91.5 m³/min Air requirement longitudinal sanding unit: 30.5 m³/min Air requirement brushing system: 18.0 m³/min Air requirement conveyor belt cleaning: 13.5 m³/min Air output workpiece vacuum clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Overall compressed air consumption: 115 m³/h MACHINE DETAILS Total power connection: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dedusting Machine EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air velocity: 20 m/s Air requirement: 30.5 m³/min Conveyor bed drive: 1.1 kW / inverter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Height adjustment drive: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dedusting machine EA 8 - Workpiece vacuum clamping system - Multiple cross and longitudinal sanding units - Brushing unit

Stanje: rabljeno, Leto izdelave: 2006, spodnji kalibrator z 2 spodnjima trakoma RR 1300 2 spodnja valja zgornji kalibrator z 2 zgornjima trakoma RR 1300 Nwsdpfeycxwfjx Altsi 2 zgornja valja

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, višina brušenja: 150 mm, delovna višina: 150 mm, vrsta nastavitve višine: električni, višina obdelovanca (maks.): 150 mm, - Very good condition - Year of manufacture: 1993 - Electronic PLC control by Heesemann - Model / Type: LSM 6 TECHNICAL SPECIFICATIONS: - Working sanding width: 1350 mm - Max. thickness of sanded elements: 150 mm Nedew H Sk Tspfx Altowi MACHINE CONFIGURATION: I – Cross sanding unit with electronic sequential pressure shoe - Main motor: 13 kW - Pneumatic photocell-controlled oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II – Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pressure pad - Pneumatic photocell-controlled oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTOCELL OSCILLATION - Pneumatic cleaning bar system with belt oscillation III – Combination unit with pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pressure pad - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit following the main unit, at outfeed - Motor: 1.1 kW - Extraction outlet: 1 x 140 mm - Feed by variable speed gear motor: 4 kW - Feed speed: 6–26 m/min - Airflow requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic cleaning system for feed belt - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for lacquer and intermediate lacquer sanding - Dimensions (L/W/H): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Stanje: rabljeno, Število brusilnih agregatov: 4 kos Brusilna širina: 1.300 mm Maksimalna brusilna višina: ca. 140 mm Frekvenčno krmiljen večnamenski avtomat za površinsko brušenje ali 2-pasni križni brusilni avtomat Heesemann MFA 8 za brušenje ploščatih lesenih materialov in/ali lakiranih obdelovancev (vmesno brušenje laka) z vakuumskim transporterjem in velikim kompletom brusnih trakov. Agregat 1: Elektronska pritisna letev Agregat 2: Prečno brušenje Nwedpexr N I Eofx Altsi Agregat 3: Vzdolžno brušenje Agregat 4: Čistilna krtača

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.350 mm, skupna širina: 2.260 mm, skupna višina: 2.350 mm, skupna dolžina: 4.195 mm, delovna širina: 1.350 mm, teža obdelovanca (maks.): 150 kg, skupna masa: 10.000 kg, delovna višina: 880 mm, moč: 86 kW (116,93 KM), priključek za stisnjen zrak: 7 letvica, potreba po zraku: 186 m³/h, Stroj je v delovanju. Načrtovana demontaža: december 2026. Nsdpezgaa Ujfx Altewi

Leto izdelave: 1997, stanje: dober (rabljeno), • Working width (mm): 1300 • CSD system • Cross sanding unit • Longitudinal sanding unit - shoe type • Brushing unit Nwodpfx Aoidi Iveltji • Ionisation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.300 mm, TEHNIČNE PODROBNOSTI Delovna širina: 1.300 mm Nsdpfx Aozktnteltowi OPREMA Vakumski transportni trak Polirni valj Čopični valj EA-odpraševalni stroj z visokotlačnim sistemom pihanja in vrtljivimi šobami Ionizacija za statično nabit prah Agregat za prečno brušenje z napravo za izpihovanje traku Agregat za vzdolžno brušenje, brezstopenjsko nastavljiva hitrost, z napravo za izpihovanje traku Kalibracijski valj, ki ga je mogoče upravljati prek nadzorne plošče.

Stanje: rabljeno, Leto izdelave: 1997, Rabljeni stroj Leto izdelave: 1997 1 tračni brusilni avtomat s kombiniranim agregatom z elektronskim lamelastim pritisnim trakom za brušenje mehkih in trdih furnirjev Kalibracija in fino brušenje masivnega lesa Kalibracija nosilnih plošč obdelovancev Njdpfx Alszk N Ddstewi Brušenje poškodovanih furnirjev in lakov Vmesno brušenje PU, hidro, UV, nitro in poliestrskih lakov Brušenje zapornih folij z grafičnim upravljalnim terminalom NC-krmiljena nastavitev debeline od 3 do 150 mm Vklop kalibracijskega valja preko terminala s patentiranim CSD-lamelastim pritisnim trakom za kompenzacijo toleranc obdelovancev do 2 mm Širina brušenja: 1100 mm Dolžina brusilnega traku: 2150 mm Hitrost brusilnega traku je frekvenčno regulirana, pribl. 2–18 m/s Pogon brusilnega agregata: 15 kW Podajalna hitrost: 5/10 m/min Tlak stisnjenega zraka: 6 bar Poraba stisnjenega zraka: 15 NL/min Odvod zraka pri traku: 490 l/min Priključek za odsesavanje: 180 mm Poraba zraka brusilnega agregata: 1800 m³/h Potrebna hitrost zraka: 20 m/s Skupna priključna moč: ca. 17 kW Teža: ca. 2000 kg Dimenzije (ŠxGxV): 1840x1670x2200 mm Stroj bo še opremljen z novim podajalnim trakom Razpoložljivost: kratkoročno Lokacija skladišča: Röllbach

Stanje: rabljeno, Leto izdelave: 1998, Rabljen stroj Letnik izdelave: 1998 1 tračni brusilni stroj z univerzalno brusilno glavo z elektronsko nastavljivo pritiskno letvijo za brušenje mehkih in trdih furnirjev kalibriranje in fino brušenje masivnega lesa kalibriranje nosilnih plošč obdelovancev odstranjevanje pomanjkljivih furnirjev in premazov medbrušenje poliuretanskih, hidro, UV, nitro in poliestrskih premazov brušenje zaščitnih folij z grafičnim upravljalnim terminalom CNC-nadzorovana nastavitev debeline od 3 do 150 mm vklop kalibracijskega valja prek terminala z patentirano CSD pritiskno letvijo za kompenzacijo odstopanj obdelovancev do 2 mm širina brušenja 1350 mm dolžina brusilnega traku 2150 mm hitrost brusilnega traku, nastavljiva s frekvenčnim upravljalnikom, približno 2–18 m/s pogonska moč brusilne glave 15 kW hitrost podajanja 5/10 m/min zračni tlak 6 bar potreba po stisnjenem zraku 15 NL/min z odsesavanjem zraka 490 l/min odsesovalni nastavek 180 mm potreba po zraku brusilne glave 1800 m³/h zahtevana hitrost zraka 20 m/s skupna električna priključna moč približno 17 kW teža približno 2500 kg dimenzije (Š x G x V): 2090 x 1670 x 2020 mm Stroj bo opremljen z novim podajnim trakom. Razpoložljivost: po dogovoru Nedpfxozk Nxzj Altjwi Lokacija skladišča: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Industrijski križni brusilni avtomat za visokokakovostno površinsko obdelavo lesenih, furniranih in lakiranih obdelovancev. Kombinacija prečnega in vzdolžnega brusilnega agregata omogoča zmogljivo in natančno obdelavo v neprekinjenem procesu. Obdelovalni agregati: 1 × Prečni brusilni agregat s pritisnim lamelnim trakom 1 × Vzdolžni brusilni agregat 1 × Naprava za krtačenje Tehnični podatki: Širina brušenja: 1.300 mm Nwjdpfx Aezinvioltei Maks. debelina obdelovanca: 140 mm Delovna višina: 780–920 mm Hitrost pomika: 4,5–22 m/min Prečni brusilni trak: 4.900 × 150 mm Pritisni lamelni trak: 4.650 × 140 mm Vzdolžni brusilni trak: 2.620 × 1.350 mm Krtačni valj: Ø 150 mm Vakuumska vpenjalna enota za obdelovanec: 7,5 kW Skupna priključna moč: 44 kW Teža stroja: prbl. 3.850 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, skupna masa: 4.200 kg, Fine Finishing and Smoothing Sander Heesemann, Type: FGA 6 For intermediate lacquer sanding, wood smoothing, and sanding of films/foils The machine is fully operational, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: Equipped with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off device Feed speed: 4.5 – 22 m/min infinitely variable Nsdpfx Aljya I Iuotewi Aggregates Brush roller unit: Centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit: - Stepless, electronic regulation of the belt speed via frequency inverter - Maintenance-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Infrared belt control - Belt operates in counter-rotation Abrasive belt dimensions: 2620 x 1350 mm Abrasive belt speed: 0.3 – 12 m/s Drive power: 11 kW Graphical operating terminal for input of machine settings, including numeric thickness adjustment, disturbance indication, workpiece feed, and feed speed display Electronically controlled pressure beam Distance between guide rollers: 40 mm Pneumatic belt tensioning The pressure beam contact surfaces automatically adjust to the shape of the passing workpieces Workpiece suction clamping system: Fan with 5.5 kW drive power Operating side and terminal: Left Operating voltage: 400 V; 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Subject to technical changes, errors, and prior sale)

Leto izdelave: 2002, stanje: rabljeno, številka stroja/vozila: 200212102, Technical Data: - Manufacturer: Heesemann - Model: EA4 - Year of manufacture: 2002 - Working width: 1,300 mm - Working height: 880–920 mm - Roller conveyor, rubber-coated rollers - Roller pitch: 65 mm - Roller diameter: 60 mm - Fine dust filter Arrangement of the dedusting modules (viewed in feed direction): 1) Air jet channel, 1 unit from below 2) Ionization from below 3) Air jet channels, 2 units from above (with separate fan, no compressed air required) 4) Ionization bar from below and above Njdpfx Aeyffrnsltewi Installation dimensions: - Installation length: 830 mm - Width: 2,245 mm - Height: 1,470 mm - Extraction nozzle: D 160 mm - Height adjustment: motorized - Without control system (optionally, a new control system can be offered) - Location: Blomberg warehouse Photo 1, for reference only

Stanje: dober (rabljeno), Leto izdelave: 1995, Večnamenski površinski brusilni avtomat, brusilka za lak, modularni agregatni sistem, končni agregat, brusilni agregat, brusilna postaja, tračna brusilka, tračni brusilnik - maks. širina brusilnega traku: 1350 mm - Brusilni trak: oscilirajoč - Pogon: 11 kW - Število vrtljajev: frekvenčno regulirano - Dimenzije brusilnega traku: 2620 x 1350 mm - maks. sprejemna višina obdelovanca: 140 mm Nwodpfognnbvex Altei - Brusilni agregat: nastavljiv po višini (transportni trak fiksna višina) - Dimenzije stroja: 2210/2320/H2310 mm - Teža stroja: 4500 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, skupna masa: 5.500 kg, delovna višina: 880 mm, Širokopasovni brusilni stroj s prečnim in vzdolžnim agregatom za brušenje, med drugim tudi furnirja pred lakiranjem. Stroj je popolnoma funkcionalen, dobro vzdrževan in v zelo dobrem tehničnem stanju. Transportni trak je bil obnovljen. Nwjdjya I Rijpfx Altei Brusna širina: 1300 mm Delovna višina: 880 mm konstantno Debelina obdelovanca: maks. 3–140 mm Transportna postelja: z ločenimi transportnimi trakovi Pogon: 3,0 kW trifazni motor, vključno z odpihovalno napravo Hitrost podajanja: 4,5–22 m/min nastavljiva Agregati: prečni/vzdolžni/ščetka Ščetkasti valj centralno nastavljiv po višini Premer: 150 mm Pogonska moč: 1,5 kW Ščetine: vlakna 1. Prečni brusilni agregat z neobrabljivo zavorno napravo, pnevmatsko napetostjo traku, nadzorom teka traku sistem pritisnih lamel, prekinitvena odpihovalna naprava za trak Mere brusnega traku: 4900 x 150 mm Hitrost traku: 12 + 24 m/s Pogonska moč: 13 / 17 kW 2. Vzdolžni brusilni agregat brezstopenjska elektronska regulacija hitrosti traku preko frekvenčnega pretvornika neobrabljiva zavorna naprava, pnevmatska napetost traku prekinitvena odpihovalna naprava za trak infrardeče vodenje traku tek traku v nasprotni smeri Mere brusnega traku: 2620 x 1350 mm Hitrost traku: 0,3–12 m/s Pogonska moč: 11 kW Grafični upravljalni terminal za vnos nastavitev stroja, vključno z numeričnim nastavljanjem debeline in prikazom napak, prehoda obdelovanca ter hitrosti podajanja Elektronsko krmiljena pritisna letev Razdalja med krmilnimi valji: 40 mm Pnevmatska napetost traku Pritisne površine letve se samodejno prilagajajo obliki obdelovanca Teža: cca. 5500 kg Potrebni prostor: cca. 2550 x 2675 x 2400 mm

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 4.300 h, Funkcionalnost: popolnoma funkcionalen, širina brusilnega traku: 2.000 mm, Končni brusilni stroj, opremljen z: Nwodpfx Alezk S Nvjtei 1 brusni trak s podlogo CSD, širina: 2000 mm 1 brusni trak s podlogo CSD, širina: 2000 mm

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 4.300 h, skupna masa: 16.000 kg, hitrost brusilnega traku: 14 mm/s, dolžina brusnega traku: 2.620 mm, širina brusilnega traku: 2.000 mm, Kalibrirni brusilni stroj, širina: 2000 mm, opremljen z: 1 jermenom z jeklenim valjem za kalibriranje 1 jermenom z brusilno ploščo CSD za končno brušenje 1 jermenom z brusilno ploščo CSD za končno brušenje Nedpfx Alszk S Ncjtowi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, največja dolžina izdelka: 5.015 mm, Edge and profile sanding machine from 2017. This HEESEMANN UKP 20 features a total belt length of 5015 mm and a feed speed range of 5–25 m/min. It is equipped with two belt sanding units for sanding straight edges and small profiles, with electronic frequency control for speed adjustment. If you are looking for a high-quality sanding machine, consider the HEESEMANN UKP 20 we have for sale. Contact us for further details. Workpiece transport system • Total length: 5015 mm • Drive: 1.5 kW three-phase motor, double chain transport • Feed speed: 5–25 m/min, frequency-controlled • Working height: 880 mm (constant) • Integrated control cabinets • Adjustable fence with digital readout and counter-fence with central width adjustment • 4 lateral guide rollers between the sanding units for secure belt transport Control • Industrial PC, 10.4" LCD-TFT touchscreen • Display of production and downtime periods • Program memory for 100 programs Nwedpfxey Twhxo Altji Sanding units • 2 x belt sanding unit "M4" (positions 1 and 2) • Application: Straight edge sanding • Belt: 2300 x 80 mm • Speed: 0.7–12 m/s, stepless via electronic frequency control • Motor power: 3.0 kW • Electronic sanding pressure control via terminal • 2 x oscillation units for "M4" (positions 1 and 2) • Purpose: Full utilization of the sanding belt • 2 x belt sanding units "K4" (positions 3 and 4) • Areas of application: Small profiles; beveling • Swivel range: +90° upwards / -45° downwards • Belt interruption switch • Tool holder with quick-change device • Intermittent belt feed mechanism • Belt: 2000 x 50 mm • Speed: 0.5–8 m/s, stepless via electronic frequency control • Motor power: 1.1 kW • Electronic sanding pressure control via terminal Automation/Line Control • 4 electronic line controls for fully automatic timing of tool engagement/disengagement based on the set feed speed, sanding pressure, and unit angle

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.300 mm, višina brušenja: 160 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only exhibition unit available in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speeds up to 18 m/s - Table extensions at infeed and outfeed - Industrial PC 15.6" - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration return roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts - LED lighting inside the machine - Vacuum table prepared (bored) for connection of the vacuum blower - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air jet pipe - CSD (magnetic pressure beam) Nodjwcqr Ajpfx Altswi The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us.

Stanje: rabljeno, No. 3198 Machinery Package for Painting & Surface Finishing: BUETFERING, HEESEMANN, Barberan Used Comprising: - Wide Belt Sander BUETFERING Classic 313 - QCE - UV Coating Roller Barberan BRB - 1400 - Drying Tunnel Barberan HOK - 14/2 - Lacquer Sanding Machine HEESEMANN FGA 8 - Extraction System Schuko Vacomat S/N 25/45 Technical Data: - Wide Belt Sander BUETFERING Classic 313 - QCE Used, Year of manufacture: 2000 Sanding width: 1350 mm Cross belt width: 150 mm Cross belt length: 4700 mm Wide belt width: 1370 mm Wide belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed speed stepless: 2.5 - 13 m/min Cross belt power: 15 kW 1st wide belt: 12.5/16 kW 2nd wide belt: 11 kW Total connected load: 49 kW Sanding of veneered workpieces with the cross sanding unit and segmented pad, in one or two passes Precise calibration with the contact roller of the 2nd unit Solid wood sanding: 1st pass with contact roller / 2nd pass with cross sanding unit and segmented pad Machine weight: 4500 kg - UV Coating Roller Barberan BRB - 1400 Used, Year of manufacture: 2006 For applying primer and topcoat - Drying Tunnel Barberan HOK - 14/2 Used, Year of manufacture: 2006 With medium-pressure lamp, mercury or gallium, power output: 80 W/cm or 120 W/cm Elliptical spot reflector, air-cooled, made of aluminium Air cooling system for each lamp or reflector - Lacquer Sanding Machine HEESEMANN FGA 8 Used, Year of manufacture: 1994 Multipurpose surface sanding machine 1 oscillating sanding belt Sanding belt width: 1350 mm Drive: 11 kW Max. workpiece height: 140 mm Sanding belt dimensions: 2620 x 1350 mm (L x W) - Extraction System Schuko Vacomat S/N 25/45 Used, Year of manufacture: 2000 Njdpfevxrynex Altjwi Filter area: 45 m² Sale on behalf of customer, ex-location near 86156 Augsburg, without dismantling, transport or installation Dismantling, loading and transport by us available as an option Subject to errors in the description and price To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended Sale as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without obligation Subject to prior sale No warranty on used machines; sold ‘as inspected’ Pictures and videos are for reference only and do not represent actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex-location

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 128 9 7000 3043, dolžina podajanja os X: 1.350 mm, skupna širina: 1.975 mm, skupna višina: 2.350 mm, skupna dolžina: 2.260 mm, skupna masa: 4.500 kg, delovna višina: 880 mm, moč: 93 kW (126,44 KM), višina obdelovanca (maks.): 150 mm, potreba po zraku: 151 m³/h, V dobrem stanju. Načrtovana demontaža december 2026. Nwsdozf U T Hopfx Altji

Stanje: dober (rabljeno), Leto izdelave: 2000, Poseben stroj, ni prehodni stroj, ampak delovna postaja, približno 150 cm dolga, kjer je obdelovanec pritrjen. 4 agregati so postavljeni prečno na smer pomika. Uporabljala se je za vmesno brušenje poliestrskega laka za doseganje visokega sijaja na armaturnih ploščah luksuznih avtomobilov. Dolžina stroja je 12 m. Nodjxivbmjpfx Altewi

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, We offer this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any questions or require further information, please feel free to send us a message or give us a call. Upon request, the order confirmation with all technical details can be provided. 1 Workpiece conveyor system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable between 5 – 25 m/min, frequency controlled, working height constant at 880 mm, including integrated control cabinets; including adjustable stop ruler with digital display and including counter ruler with central width adjustment with centrally height-adjustable and laterally adjustable pressure beam with digital display, which presses plate-shaped workpieces using ball-bearing mounted rubber rollers (axle spacing 38 mm), including support rollers for width extension of the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 lateral guide rollers between the sanding units for secure t ransport of strips 1 Industrial PC 3.0/4" LCD-TFT color display 800 x 600 resolution CF Card 1GB Operating system Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection possible. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, intermittent belt cleaning device, belt break detector, tool holder with quick-change system, base plate for sanding tool, prepared Nwodpfx Aey A D Ecjltji for electronic position control for automatic engagement and disengagement of the sanding tool, able to run in both directions. Belt dimensions: 2,300 x 80 mm Sanding belt speeds: 0/7 – 12 m/s Motor power: 3.0 kW via electronic frequency control for stepless regulation of belt speed. Electronic sanding pressure regulation from terminal. 2 oscillation devices for (Vt4") (positions 1 + 2) For full utilization of the sanding belt 2 belt sanding units "K 4" positions 3 and 4 including stand, for sanding small profile sections, also suitable for edge rounding/can be swivelled 90 degrees upwards and 45 degrees downwards belt break detector, tool holder with quick-change system, base plate for sanding tool, intermittent belt cleaning device, prepared for electronic position control for automatic engagement and disengagement of the pressure tool, including bidirectional operation, set up for manual adjustment and digital displays for adjustment axes. Belt dimensions: 2,000 x 50 mm Sanding belt speeds: 0.5 – 8 m/s Motor power: 1.1 kW via electronic frequency control for stepless regulation of the belt speed. Electronic sanding pressure regulation from terminal. 4 electronic position controls for fully automatic engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and aggregate angle adjustment. 2 steel tools for straight edge, configured for air cushion sanding/ including base plate/for one "M4" aggregate, item no. 9000191310 2 steel profile tools configured for air cushion sanding, including base plate, for one "K4" aggregate, item no. 20000025684

Stanje: dober (rabljeno), delovna širina: 1.350 mm, HESEEMANN LSM8 Njdpfx Aljxcg Scjtewi