Tračna žaga

THOMAS ZIP 28 DUAL MODE

Stanje: zelo dobro (rabljeno), The fully hydraulic high-speed production band saw is equipped with a universal hydraulic system for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid materials, all without changing the saw blade, thanks to a uniform tooth pitch of 3 or 4 teeth per inch. The machine features a pre-tensioned saw frame guide, enclosed oil hydraulics, triple swivel bearing, separate coolant system, steplessly adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, and is standard-fitted with a stepless mitre setting device. The saw frame can be lifted in rapid traverse mode. A pivoting vice ensures optimum utilization of the saw blade. Longitudinal guidance with ground and hardened guide rails transfers the cutting forces to the saw frame. Automatic end stop. Push-button control for ON/OFF functions and rapid traverse of the saw frame. Manufacturer: KASTO Type: PSB 280 U Ijdpfx Ajxdwbkodkeap Drive power: 2.2 kW Stroke frequencies: 40/51/64/80/102/128 strokes/min Cutting speed: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: hydraulic Cutting range round: 280 mm yCutting range flat: 280 x 150 mm Mitre range: 0-45° Material support height: 600 mm Weight: 650 kg Length/width: 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: coolant system, rapid lowering, rapid lifting

Stanje: novo, Leto izdelave: 2024, Manual band saw machine for cuts from 0° to 60° to the right. Hydraulic blade tensioning, bow handle with control button. Combination blade guide with side bearings. Carbide cutting inserts and an upper bearing. Manual cutting or also possibility of unattended cutting, using the saw bow’s own weight, regulated by hydraulic brakes; afterwards, the bow is manually raised back to the desired position. Manual vise for quick and precise clamping of the workpiece. Swiveling of the saw bow from 0° to 60° to the right with locking positions, precise angle measurement, manual quick-action vice with quick clamping lever. Millimeter-graded scale rod. Iajdogculvopfx Adkop Coolant tank integrated on the upper side of the base frame with discharge nozzle and electric coolant pump for cooling both sides of the saw blade guides. Control voltage 24 VAC, main switch and control system. Maximum circuit and short-circuit protection. Connection voltage: 400V/50Hz/3Ph standard. Machine color: yellow RAL 1018 and grey RAL 7036. You are always welcome to inspect the desired machine in our manufacturing/showroom facility. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm Ijdpfxonh R Eks Adkjap • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, - Shaft diameter 30 mm - Rotates clockwise and counterclockwise - Emergency stop - Documentation - 230V Iedpfx Adslzgwhjkjap

Stanje: novo, NEBES TM 275 Bandsaw – 400 V Three Phase, NEW “CE” - INDUCTION motor - Cast iron frame - Adjustable cutting angle from 0° to 60° - Entire structure made of cast iron - Electric pump for blade lubrication and cooling - Oil-bath blade tension gauge - Front controls and two cutting speeds - Coolant pump bypass switch - Blade guide with hard metal (H.M.) pads Cutting capacities: - Round at 0°: 220 mm - Square at 0°: 200 x 200 mm - Flat at 0°: 230 x 185 mm Iasdpfx Adoh Nm Ncoksp - Round at 45°: 150 mm - Square at 45°: 150 x 150 mm - Flat at 45°: 150 x 200 mm - Round at 60°: 90 mm - Square at 60°: 90 x 90 mm - Flat at 60°: 90 x 120 mm - Power: 1.3 HP - Voltage: 400 V - Blade size: 2450 x 27 x 0.90 mm - Weight: 265 kg

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m Iaedpfxjhpktve Adkop The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Round material 30 x 1 mm Square material 30 x 30 x 1 mm Solid round material 16 mm Solid square material 30 x 10 mm Rotational speed 9 rpm Total power requirement 1.1 kW Machine weight approx. 0.32 t Space requirement approx. 0.82 x 0.60 x 1.26 m Electric profile bending machine with - 5 sets of rollers 2x for round material 20 mm and 30 mm, 1x for flat material 1x for square material 1x for ? - Foot switch with emergency stop Ijdpfx Adoh D Svneksap

Stanje: rabljeno, Technical Details: Grinding Wheel Diameter: 200 mm Voltage: 220 / 380 V / Hz Iaedpfxeu Ngu Ss Adkep Speed: 3000 rpm Total Power Requirement: 900 watts Weight: 22 kg Dimensions (L x W x H): 0.23 x 0.46 x 0.25 m Double-Sided Bench Grinder; tabletop unit with left/right grinding rests, horizontally adjustable by 30 mm Max. grinding wheel Ø: 200 mm Max. grinding wheel thickness: 32 mm Currently mounted grinding wheels: Left = Ø 190 mm x 30 mm, type H50 Right = Ø 180 mm x 32 mm, type M20

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting area at 45°: flat 135 x 185 - 145 x 150 mm Cutting area at 45°: round 150 mm Cutting area at 45°: square 145 mm Cutting area at 60°: flat 63 x 107 - 69 x 90 mm Cutting area at 60°: round 70 mm Cutting area at 60°: square 70 mm Cutting area at 90°: flat 240 x 160 - 250 x 110 mm Cutting area at 90°: round 225 mm Cutting area at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight: approx. 200 kg Required space: approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling saw head descent - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil bath gearbox - Saw bow, vice, and mitre assembly made from cast steel - Steel saw blade guide with ball bearings - Quick-release vice - Front-integrated lever for mitre angle lock - Coolant pump with aluminium body - Large handwheel for easy blade tensioning - Pressure gauge for blade tension display (600-1000 kg/cm³) Isdpfx Adslb I Daokoap - Emergency stop safety switch - Swarf brush for saw blade cleaning STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for series cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Stanje: novo,