Banka peres

Colombo Tornado AT 150/S4 ECOMATIC

Stanje: novo, Power Feeder 4 rollers Roller diameter: 120 mm Roller width: 60 mm Motor power: 0.75 kW Pole-changing motor Iedpfx Ageh Dikwopja Speed: 1,400 rpm Feed speed: 3 - 18 m/min, variable Approx. weight: 37 kg WITHOUT stand '‘Standard’' or ‘1050’ stand optionally available Note for used machines: • Technical data subject to error and prior sale. • Prices quoted are ex-works—free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no warranty or guarantee of any kind. Buyers are encouraged to inspect on site. • Special agreements valid only in written form. (We only respond to inquiries providing your address and phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, HOLZ-HER Sprint 1329 Iodpexducrsfx Agpja - rabljeni robni lepilni stroj v dobrem stanju. - Letnik: 2015 - vključno z vračalnim sistemom BARBARIC (letnik 2017) - na voljo od konca novembra/začetka decembra 2025 Za vprašanja nas kontaktirajte.

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm Iedpfjvu Hghox Agpea > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: zelo dobro (rabljeno), SCM Multiflex angular processing centre for single-sided cross and longitudinal machining of window and door corners Tenoning spindle, length 320 mm, max. working range 320 mm Roller feed system Profiling spindle, length 320 mm, max. working range Iedpfx Agewmcnwspja

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly inspected before delivery Technical Data Summary (For any additionally included accessories, please inquire) Pos. 1: Cross-cut saw ----- > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser line for identifying the saw cut > NC length stop, mounted on slotted table included Positioning of the cross-cut saw integrated into control system. > Length: 3500 mm Pos. 2: Tenon and slot spindle ----- > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb-cut and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide rail in the stop (area of climb-cut spindle), Sash support bar from above in the area of vertical right profile milling unit and profiling spindle. Pos. 5: Profile milling unit horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-capable Iedpfjvu Hfqex Agpsa > Rebate unit for tear-free rebating > Double-part package > Return conveyor for one-man operation: pivoting belt > Screen control > Tilt window device > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original pictures available yet. Photos show an identical machine from our archive. ----- Price for the above machine on request! ----- Optional at extra cost: EUR 6,500.00 Note...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, on request Isdpfsfxgmgjx Agpsa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Leto izdelave: 2003 Isdetr A Evspfx Agpsa Napetost: 400 V Frekvenca: 50 Hz Teža: 3200 kg Število osi: 3

Stanje: pripravljen za uporabo (rabljen), Tehnične značilnosti 6-nosilna konzolna miza 3-osna ISO 30 elektro vreteno 10 KM Iedpfx Astqkbqsgpoa 24-vretena vrtalna skupina (12 v osi X, 6 v osi Y, 6 vodoravnih v oseh X in Y) Krmilna plošča Stroj je potrebno ponovno zagnati Moč in motorji Napetost: 380 V Priklop: trifazni Skupne dimenzije

Stanje: rabljeno, Leto izdelave: 2021, Traverse paths (X, Y, Z): 4062, 2,922, 660 mm Number of spindles, vertical drilling head: 13 pcs. Number of spindles, horizontal drilling head: 6 pcs. Number of tools: 27 pcs. Number of milling units: 1 pc. Working area: 3200 x 1500 x 200 mm Motor power: 12 kW CNC control: BECKHOFF MASTERWOOD Project 385 (Winner) ----- Exhibition machine, year of manufacture 2021, available immediately with manufacturer’s new machine warranty! 5-axis CNC machining center in portal design, suitable for interior fittings, doors, stairs, optionally expandable with solid wood clamps for frame processing and arched windows Brief summary: ----- Working area: X = 3200 mm; Y = 1500 mm; Z = 200 mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F interface 1 piece fixed drilling head with 19 spindles with 7 individually selectable vertical drilling spindles in X-direction with 6 individually selectable vertical drilling spindles in Y-direction with 2 double horizontal drilling spindles in X-direction and 1 double horizontal drilling spindle in Y-direction Saw unit integrated in drilling head 27 tool change positions: Carousel tool changer with 22 positions and 102 mm center distance linear 5-position tool magazine for large tool diameters Original SCHMALZ tubeless worktable. Console table with 6 beams/traverses Workpiece lifting device Automatic measurement device for tool length. 12 pcs. original Schmalz vacuum cups 114 x 140 mm, height = 125 mm 1 pc. Becker vacuum pump, 100 m³/h Iodpfxoxmk Ate Agpsa 1 pc. chip conveyor belt Construction software Masterwork: 2D-Wop for standard panel processing/interior fittings, arch segments, doors Master 3D Level 2: for more complex operations, optionally expandable for full 5-axis interpolation Prepared for the use of solid wood clamps (arches), clamps offered as an option if required later Technical specifications according to the attached, detailed description ----- Total price in this configuration ex stock Oberkochen: on request! ----- Freight and commissioning on request! Options for frame production/arched elements with surcharges: ----- Reference ring for mounting chip guide elements on 5-axis electrospindles with HSK 63F interface: €410.00 Basic kit for clamping arched elements - 6 pneumatic clamps with two movements for arched components: €7,090.00 (technical data according to manufacturer - no guarantee!) Chip guide elements, price per piece: €460.00 All prices quoted are net, plus VAT. (technical data according to manufacturer - no guarantee!)

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), I am selling the Weinig Univar 10 window profile doubling center. Year of manufacture: 1998. Iodpofzzhrsfx Agpsa Milling heads: OERTLI. Available immediately. Unit price: 8,500 euros. 4 units available. Condition: very good!