Dvostranski robni lepilni stroj

BIESSE STREAM SB

Stanje: rabljeno, številka stroja/vozila: 007641, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, PUR Edgebanding machine: Machine 1 Max. panel width: 1200 mm Working units, right side: 8 units Working units, left side: 9 units Fjdpfxjwuz R Ho Aplspg

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition Fpjdpsrigxyefx Aplog

Stanje: rabljeno, številka stroja/vozila: 007811, Pozicija 1: Nakladalnik BIESSE - RBO-STREAM SB Pozicija 2: Dvostranski lepilni stroj za robove BIESSE - RBO-STREAM SB Pozicija 3: Obratnik za plošče BIESSE - RBO-STREAM SB Pozicija 4: Dvostranski lepilni stroj za robove BIESSE - RBO-STREAM SB Pozicija 5: Prehodni vrtalni stroj BIESSE - RBO-STREAM SB Pozicija 6: Prehodni vrtalni stroj BIESSE - RBO-STREAM SB Pozicija 7: Obratnik za plošče BIESSE - RBO-STREAM SB Fodpfx Apov Dyxcjljpg Pozicija 8: Razkladalnik BIESSE - RBO-STREAM SB

Stanje: rabljeno, številka stroja/vozila: 007357, Pozicija 1: Nakladalec BIESSE - RBO-STREAM SB2 9.5 Pozicija 2: Dvostranski stroj za lepljenje robov BIESSE - RBO-STREAM SB2 9.5 Pozicija 3: Obratnik plošč BIESSE - RBO-STREAM SB2 9.5 Fpedpfxswuz Rtj Aplog Pozicija 5: Obratnik plošč BIESSE - RBO-STREAM SB2 9.5 Pozicija 6: Razkladalec BIESSE - RBO-STREAM SB2 9.5

Stanje: rabljeno, številka stroja/vozila: 007716, Working area X-axis: 3250 mm Fedpfswuz N Njx Aplopg Working area Y-axis: 1220 mm Working table: With vacuum pod supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool positions: 16

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Fpjdpfx Asywk Eleplog - Safety cutter (pre-milling) AS 10 (approx. 1 x 5.2 kW) - 2 x hoggers DT 10 (approx. 2 x 5.8 kW) - Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6-fold) - End trimming unit IT 90-S (approx. 2 x 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°-25° - Multifunction unit (radius milling and profile milling) AR 30 (2 x 0.35 kW) Left: 2 x universal milling unit for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0° - 90° Right: universal milling unit for grooving/rebating and profiling FB 30 (approx. 1 x 5 kW) 0° - 90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 - Spray units (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower - Edge trimmer PH 10 OPTION: D.O.M. unstacker with support column and mobile jib (with vacuum suction grippers) for unloading and stacking edge-processed panels.

Stanje: dober (rabljeno), SQUADRABORDATRICE 1° E 2° DI LINEA CON CARICATORE A PONTE E GIRAPANNELLI MARCA: BIESSE MODELLO: STREAM SB2, CE Fpedpfjvvcd Sex Aplog DATI TECNICI * Altezza pannello min/max: 10 / 60 mm * Altezza bordo min/max: 15 / 65 mm * Spessore bordatura min/max: 0,3 / 3 mm * Sporgenza pannello dal nastro di avanzamento: 35 mm * Lunghezza minima pannello: 240 mm * Larghezza minima pannello: 240 mm * Velocità di avanzamento: da verificare * Collegamento pneumatico: presente COMPONENTI DELLA LINEA * Fresatrice * Doppio truciolatore * Gruppo incollaggio * Magazzino bordi a 6 posizioni * Gruppo intestatore * Gruppo refilatore sovrapposto * Gruppo spigolatore * Gruppo arrotondatore a 4 motori * Fresatrice * Gruppo raschiabordo * Gruppo raschiacolla * Gruppo phon * Gruppo spazzolatore * Controllo NC 410 AUTOMAZIONE * Caricatore a ponte RBO modello SELECTA C, doppia stazione * Girapannelli a piatto RBO modello GP

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Fpsdpfxofzzhye Aplsg Available immediately. Total price: €17,000. Condition: very good!

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE, including for NARROW PARTS min. 65 mm, with high-speed conveying technology, No. 3 CNC-controlled through-feed drilling machines (one for lateral drilling in longitudinal direction), and No. 1 through-feed crosscut saw (splitter) Comprising the following machines: W05024A) Loading device (gantry) "RBO (BIESSE)" model Winner C W05024B) 1st Single-sided sizing and edge-banding machine (left) "BIESSE" model Stream SB1 TWIN W05024C) 2nd Single-sided sizing and edge-banding machine (right) "BIESSE" model Stream SB1 TWIN W05024D) 1st Turning device (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" model GPK-1 W05024E) Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 / 11.0 W05024F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024H) 2nd Turning device (90° TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" model GPK-2 W05024I) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (for lateral drilling in longitudinal direction) W05024J) Through-feed crosscut saw (splitter) "TECNOLOGICA" W05024K) Dust extraction and cleaning machine "WANDRES" W05024L) Stacking device (gantry) "RBO (BIESSE)" model Winner SC Fedpfxstr Enve Aplopg

Stanje: zelo dobro (rabljeno), COMPLETE 4-SIDED EDGE PROCESSING AND EDGE BANDING LINE, max. working width 3000 mm, equipped with automatic feeding and stacking system, consisting of the following machines: Fsdpfji Rbg Tjx Apljpg X03001A) Loading portal (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided sizing and edge banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Workpiece turning device (90° LONGITUDINAL to TRANSVERSE) "RBO" Model GPK 1 X03001D) 2nd double-sided sizing and edge banding machine "BIESSE" Stream SB 2 - 11 X03001E) Workpiece turning device (90° TRANSVERSE to LONGITUDINAL) "RBO" Model GPK 2 X03001F) Unloading portal (with 2 unloading stations) "RBO" Model Winner S 3200

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 Features and Technical Data: Edge feed for coil and strip material Jointing unit with 2 milling heads Fjdpovymdqofx Aplspg Cartridge glue application system 3-roller pressure section End trimming unit Radius milling unit Radius scraper unit Corner copying unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Max. edging height: 55 mm Min. edging strip length: 350 mm Max. edging overhang per side: 3 mm Min. workpiece width: 60 mm Min. workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6480 x 1250 x 1690 mm Availability: short-term Location: Flörsheim

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in line) Edging material (edge) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Cam pitch (mm): 500 FORMATTING UNIT (per side): - Pre-milling cutter (trimming) AS 10 (5.8 kW) - 2 x Hogger DT 10 (5.8 + 5.8 kW) - Spray unit (for liquid anti-adhesive) EDGE BANDING UNIT (per side): - Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edging pressure area (CNC-controlled). Edge magazine for rolls (capacity 6 rolls) - End trimming unit IT 90-S (0.3 kW x 2) 28 m/min. 0 - 25°. PNEUMATIC - Multi-profile milling unit (CNC-controlled) RF 30 (0.65 kW x 2) 0 - 25° Multi-function unit (radius milling and shaping) AR 80 (0.3 kW x 2) 25 m/min - ROTAX Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraper unit (CNC-controlled) RB 30 Flat scraper unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) Fodpfx Apsu Tg Uqslopg With 'hopper' for panels (usable height 80 mm), as a buffer to speed up the work cycle

Stanje: zelo dobro (rabljeno), Double-sided EDGE BANDING AND FORMATTING MACHINE (First machine in a production line) Edge material (coils) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection: Enclosed cabin Side adjustment of aggregate carrier: manual FORMATTING PROCESSING (for each side): 2 x Hogging unit DT 10 (Kw 5.8 x 2) Free slot for jointing milling unit FS Jointing milling unit ES30 + ER30 (Kw 5 x 2) 0° - 90° Universal milling unit softforming SF 10 (2 x Kw 2.4) 0° - 45° Spraying unit (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): Gluing unit (Hot melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Pre-heating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions) Fpodpfx Ast N Ix Ropljg mm 800 (Guillotine CI10+CS10+RL10) - Edge magazine for coils (No. 6 compartments) Milling unit RS 10 (Kw 1.3 x 2) Milling unit softforming RF 10 / SF (Kw 0.65 x 2) Multi-profile milling unit RF 30 (Kw 0.65 x 2) Universal milling unit for grooving/rebating and profiling FB 30 (Kw 4.5 x 2) 0 - 90° Multi-profile scraper blade unit RB 30 Flat scraper blade unit RC 05 / Soft Spray aggregates (for polishing fluid) + Buffing unit SZ 30 (Kw 0.37 x 2)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, potovalna razdalja osi X: 2.100 mm, pomik osi Y: 3.050 mm, pomik po osi Z: 400 mm, število osi: 4, moč vretenovega motorja: 9.000 W, Cette CNC 4 axes QUICK UA 481 a été fabriquée en 2024. Elle dispose d’une zone de travail de 2100 x 3050 x 400 mm, d’une broche HSD/HSK F 63 de 9 kW, ainsi que d’une table à vide double couche avec 6 zones. Équipée d’un servomoteur Yaskawa et de deux pompes Becker de 250 m³/h chacune, elle est parfaitement adaptée aux travaux avancés de menuiserie. Profitez de l’opportunité d’acquérir ce centre d’usinage QUICK CNC UA 481. Contactez-nous pour plus d’informations sur cette machine. • État : neuf • Alimentation : 380 V, triphasé • Broche : HSD, 9 kW, HSK F63 Fpodpex E Efvofx Aplsg • Commande : NC Studio (interface en allemand) • Changeur d’outils : linéaire, 10 outils • entraînements : servomoteurs Yaskawa • Table : table à vide double couche, 6 zones Équipement additionnel • Système de vide : 2 pompes à vide Becker, 250 m³/h chacune

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edgebanding material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection enclosure Fpodpfehvahhox Apljg Side adjustment of aggregate carriers: manual Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Protection milling cutter (pre-milling) AS 10 (5.8 kW) 2 x Hogging units DT 10 (5.8 + 5.8 kW) Spraying unit (for liquid non-stick agent) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28m/min, 0 - 25°. Pneumatic Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multi-function unit (radius and contour copying/trimming) AR 80 (0.65 kW x 2) 25m/min ROTAX motors with automatic tool changer 2 Universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraping unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)