OBOJESTRANSKI BRUSILNIK ROBOV

BIESSE STREAM SB1 7.5

Stanje: rabljeno, Numerical control with NC 410 software Machine suitable for the first pass of the panel Motorized mobile shoulder opening by CNC, 1500 mm Panel height 60 mm PVC/ABS 3 mm Infinitely variable feed speed Electronically adjustable working height by CNC Motorized rubberized belt with superior pressure Squaring unit consisting of (on each side): * Double pre-milling unit * Automatically timed anti-splintering unit Edge unit consisting of (on each side): * Gluing unit for EVA hot-melt adhesive with pre-melter * Pressure roller unit for straight profiles with adjustable pressure rollers * 2-position coil magazine with automatic edge change * Overlapping trimming unit with 2 motors * Picking unit with 2 tilting motors * Scraping unit tiltable from 0-90° * Edge scraper unit * Glue scraper unit Fgsdpfxjrxzb Us Abtsc * Belt sanding unit * Brush unit

Stanje: rabljeno, Leto izdelave: 2009, Numerical Control POWER CONTROL PC 22 Machine suitable for the first and second panel pass Mobile motorized shoulder opening via NC, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Fgodpfxepp Tkfo Abtoc Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Non-stick unit Time-controlled automatic chip guard unit Double trimming unit Space reserved for future group extensions Gluing unit with pre-melter and glue pot Automatic adjustment of pressure rollers for edging Edge holder magazine with 2 positions Trimming unit with two motors Overlapping cut-off unit Corner rounding group (FK) Scraper unit for edges Glue scraper unit Buffing unit Non-stick unit

Stanje: zelo dobro (rabljeno), 4-sided sizing and edge banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min KZ0400b) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 325/M1/C Feed speed (adjustable): 15–40 m/min with PC 22 SIZING UNIT: Twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: Top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), grooving unit for rabbeting and grooving UF11 (4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) KZ0400c) Rotating station (90° longitudinal-transverse) "HOMAG" model TDL 310 / 25 / 12 (for longitudinal to cross transfer) Feed speed (adjustable): 20–60 m/min Fodpfx Aboiztxyjtogc KZ0400d) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 326/M2/C Feed speed (adjustable): 15–32 m/min with PC 22 SIZING UNIT: Pre-milling cutter (1 x 4.5 kW), twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: End trimming unit HL 84 (2 x 0.22 kW), top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile trimming/copying unit FF32 (4 x 0.4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) MINIMUM EDGE LENGTH: 70 mm (For narrow workpieces: max. thickness 25 mm, max. edge thickness 2 mm, max. cycle rate 20 pcs/min, max. feed speed 20 m/min.)

Stanje: rabljeno, Leto izdelave: 2013, Numerical control PC office with Widge Plus software Machine suitable for 1st and 2nd panel pass Motorized mobile shoulder opening via NC, 3200 mm Panel width min - max: 215 - 3200 mm Panel height min - max: 10 - 60 mm Edge thickness in coil, min - max (PVC-ABS): 0.3 - 3 mm Infinitely variable feed speed: 10 - 40 m/min Motorized pressure rubber belt Support track with retractable pins Pin height: 12 - 18 - 25 mm Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized top tables Squaring section consists for each side of: Non-stick group Timed splinter guard automation Double milling unit Edging section consists for each side of: Gluing unit with pre-melter for PUR adhesive and pre-melter for EVA adhesive Edge pressure rollers, electronically controlled by NC Edge holder magazine with 6 positions Cutting unit with two motors Overlapping cutting unit Staggered trimming unit with two electronically NC-controlled motors Corner rounding unit with 4 motors Fgsdsk Egvdepfx Abtec 0-90° swiveling planer group, electronically CN-controlled (mobile shoulder) 0-90° tilting milling unit + dual stacked milling spindle (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraper group Brushing unit Phon (sound insulation) group

Stanje: zelo dobro (rabljeno), EDGEBANDING AND POSTFORMING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT METHOD) Consisting of the following machines: A) Double-sided portal feed "TREVISAN" with motorized roller conveyor B) HOMAG Single-sided POSTFORMING MACHINE FOR DIRECT METHOD, Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L- and U-profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit 2.2 kW (for scoring from above) - 02° Hogging unit 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rabbeting above), motor shaft for hydro tension Fgodpfjnzhxqox Abtsc - 04° Standard milling unit 6.6 kW (for rabbeting below) 0° - 120° (with hydro tension) - 05° Radius milling unit 0.7 kW (for profile trimming) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rabbeting) - 08° Milling unit 2.2 kW (for chamfer and laminate overhang milling above) - 09° Milling unit 2.2 kW (for bending groove milling below) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rabbeting), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate breakout) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Basic pressure zone for L-profile VF Direct, for workpiece thickness max 50 mm - 16° Basic pressure zone for U-profile VF Direct, for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW C) Double-sided portal stacking system "TREVISAN" with motorized roller conveyor

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or can be used as the 1st and/or 2nd machine in a production line). Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 60 mm Working width (min/max): 240 / 2500 mm Control: PC 22 Feed speed (adjustable): 10–40 m/min Cam pitch: 500 mm EDGE PROCESSING (for each side): - Protection milling unit (pre-milling): 1 x 4.5 kW (hydro) - Chipping aggregate KD 11 (2 x 8.1 kW) hydro EDGE BANDING UNIT (for each side): Fgodpfx Aelikydsbtjc - Gluing unit (hot melt + pre-melter): A3 + A34 - Edge magazine for rolls (slot no. 6) - Edge pressure zone “C” - Pre-milling unit: 2 x 0.55 kW - Milling unit MF 20 (2 x 0.55 kW) 20° - Profile scraping aggregate PN 20 - Finishing unit (flat scraper + buffing aggregate) FA 11 Free space

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Edge thickness in rolls (min/max): 0.4 / 3 mm Panel thickness (min/max): 14 / 60 mm Working width (min/max): approx. 260 / 3200 mm Control / Software: MAESTRO PRO EDGE Feed speed (adjustable): 10–40 m/min Safety and noise protection cabin + cam spacing (mm): 400 Panel processing (for each side): - Protection cutter (pre-milling) AS (1 x 4 kW) - Chipper unit DTR (2 x 8 kW) - Spray unit (for liquid anti-adhesive) AAR EDGE BANDING SECTION (for each side): - Radiator to heat workpiece edges - Gluing station (hot melt + pre-melter) - Pressure zone (CNC controlled) - Motorised edge magazine for rolls (2 positions) - End trimming unit YU/SP-750 (30 m/min) Fgedewhi Slepfx Abtec - Pre-milling unit RSP - Multi-profile milling unit (CNC controlled) RI/S 2P - Copy shaping unit (profile tracing) C1+C2 (4 x 0.35 kW) ED-SYSTEM and Fast-Release - Profile scraping unit RAS/S - Flat scraper unit RCA/2C - Spray unit (for polishing liquid) - Buffing unit SPE - Universal milling unit for grooving/rabbetting and profiling U (1 left + 1 right) 2 x 5.5 kW

Stanje: rabljeno, številka stroja/vozila: 008109, Tip uporabljene robove: tanka rob, debela rob, masiven les Lepljenje: EVA Spajanje z rezkanjem: da Večfunkcijska enota: da Fgjdpfxjw Idc Dj Abtoc Največja debelina plošče: 12 mm Delovni agregati: 9 kos.

Stanje: zelo dobro (rabljeno), Double-Sided Edge Banding Machine - Edge Thickness (coil) (min/max) mm: 0.3 - 3 - Workpiece Thickness (panel) min./max. mm: 12 - 40 - Working Width (min./max.) mm: 250 - 2500 - PC Control: PC22 - Top Pressure System with Driven Rubber Belts - Adjustable Fence Linear Feed Rate m/min: 10 - 32 - Liquid Glue Unit - Jointing Milling Unit (vertical milling machine): 2x 4 kW at 9000 rpm Fjdpfx Abswk Hp Totegc - Quickmelt Hot Melt Adhesive Unit A3 - Pressure Zone C (manual adjustment) "A" - Coil Holders for 2 Rolls - End Trimming Unit: HL 84 (2x 0.22 kW at 12000 rpm) - Premilling Unit (2x 0.4 kW at 12000 rpm) - Finishing Unit (Flat Scraper Unit + Buffing Unit): FA11 - Polishing Unit

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness for coils (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: POWERCONTROL PC23 Power Touch / WoodCommander software Fgodpsv Rpdnsfx Abtjc Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin. Retractable stop dogs, spacing (mm): 1000 Side adjustment of aggregate carrier, manual mm 30 – 80: for manual adjustment of workpiece overhang for gluing and finishing section FORMAT PROCESSING (for each side): - Protection cutter (pre-milling) (1 x 4.5 kW) - Chipping unit KD 11 (2 x 6.6 kW) + vacant space EDGE BANDING SECTION (for each side): - Gluing unit (hotmelt glue + pre-melter) A3 + QA65 - Edgeband magazine for coils (slot No. 2) - Edge pressure zone (CNC-controlled) - Type A - End trimming unit PK30 (2 x 0.8 kW), feed speed 30 m/min - Pre-milling unit BF20 (2 x 0.55 kW) - Multi-function unit (radius and contour milling) FF30 + FF32 (4 x 0.4 kW) FlexTrim - Vacant space - Scraper unit PN 20 - Finishing unit (flat scraper + smoothing unit) FA 21. Sprayer unit (for polishing fluid) - No. 3 universal milling unit for grooving/rebating and profiling SF20 (3 x 6.6 kW) (CNC-controlled)