Linija za robove in obdelavo

BIESSE - RBO STREAM SB

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE, including for NARROW PARTS min. 65 mm, with high-speed conveying technology, No. 3 CNC-controlled through-feed drilling machines (one for lateral drilling in longitudinal direction), and No. 1 through-feed crosscut saw (splitter) Comprising the following machines: W05024A) Loading device (gantry) "RBO (BIESSE)" model Winner C W05024B) 1st Single-sided sizing and edge-banding machine (left) "BIESSE" model Stream SB1 TWIN W05024C) 2nd Single-sided sizing and edge-banding machine (right) "BIESSE" model Stream SB1 TWIN W05024D) 1st Turning device (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" model GPK-1 W05024E) Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 / 11.0 W05024F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024H) 2nd Turning device (90° TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" model GPK-2 W05024I) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (for lateral drilling in longitudinal direction) W05024J) Through-feed crosscut saw (splitter) "TECNOLOGICA" Bdjdjtr Envspfx Acboi W05024K) Dust extraction and cleaning machine "WANDRES" W05024L) Stacking device (gantry) "RBO (BIESSE)" model Winner SC

Stanje: dober (rabljeno), Leto izdelave: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 – year 2005 – effective cutting width 180 cm – traversing – new inverter device – in good condition. Bdsdpfsrtnccex Acbsi

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE (also SOFTFORMING) with through-feed drilling machines, splitter, and high-speed automatic conveyor technology. Configured as follows: A) Infeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner C (1) B) 1st Double-sided sizing and edge-banding machine "BIESSE" model Stream SB1 11.0 Softforming C) 1st Rotation station (90° LONGITUDINAL–CROSS) "RBO (BIESSE)" model GPK-1 D) 2nd Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 9.5 E) 2nd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-2 F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) H) 3rd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" model Split 4-84 LT Bedpfx Asttgy Hjcbjdi L) Outfeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner SC (2)

Stanje: zelo dobro (rabljeno), COMPLETE 4-SIDED EDGE PROCESSING AND EDGE BANDING LINE, max. working width 3000 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X03001A) Loading portal (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided sizing and edge banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Workpiece turning device (90° LONGITUDINAL to TRANSVERSE) "RBO" Model GPK 1 X03001D) 2nd double-sided sizing and edge banding machine "BIESSE" Stream SB 2 - 11 X03001E) Workpiece turning device (90° TRANSVERSE to LONGITUDINAL) "RBO" Model GPK 2 Bdodpfei Rbg Tsx Acbji X03001F) Unloading portal (with 2 unloading stations) "RBO" Model Winner S 3200

Stanje: novo, Panel Saw HOLZ-HER 1255 SECTOR pro - Showroom Machine - Cutting Height: 2,200 mm Cutting Length: 5,300 mm Vertical Precision by HOLZ-HER HOLZ-HER's vertical panel saws combine proven technology from over 50 years of experience with a fundamentally robust construction, providing you with an exceptional price-performance ratio. Your advantages: - Completely welded frame for extremely high rigidity - Precise cutting quality - Finished cuts ready for immediate edge-banding - Powerful saw motor with 4 kW output - Space-saving panel sizing with a footprint starting at just 4 m² - Smooth and ergonomic operation TRK Extraction (mandatory in all CE-countries – optional): Workstations must meet the highest requirements for health and safety. HOLZ-HER saws are among the cleanest and safest in the world. Accessories The extensive range of accessories includes convenient digital measuring displays up to our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting board-shaped wood-based materials such as chipboard, MDF panels, veneered panels, multiplex, etc. Base Machine: Fully welded frame with extremely high rigidity. Precision guidance of the saw beam/saw unit for accurate cutting. Manual feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw Beam: Sturdy saw beam guided on precision rails. Pneumatic locking of the saw beam at top and bottom. Electrically monitored for vertical cuts. Saw Unit: Smooth and ergonomic operation for plunging in and out of the saw unit. The plunge lever can be folded back in the upper position for precise engagement. Generously sized levers for easy swiveling. The cover opens the entire saw unit for quick tool changes, including ProLock quick-release chuck. View Slot: Bdsdpsu R Syiofx Acbei Riving knife can be retracted. Control Panel: Efficient machine operation. Ergonomically mounted at eye level. Lower Workpiece Support: Stable, wear-free stainless-steel support. Support up to cutting line: Narrow workpieces cannot tip or fall through. Extraction: Efficient extraction system with two connectors: Saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lift Roller Transport System: Manually liftable and lowerable rollers for easy and material-friendly panel transport. Measuring Tape: For indication of horizontal cut with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Serial cuts from the panel upper edge This offer is for an equipment package. The following items and options are included in the price: - Shifting grid - Manual longitudinal stop for vertical cuts - Digital measurement display for horizontal cuts - 3 adjustable stop points in the saw beam - TRK SH 2,200 extraction system - Strip stop for repeat horizontal cuts - New showroom machine -

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) TURNING TRANSFER (longitudinal/crosswise), with double cone "RBO" Model GPK-1 C) Double-sided edge banding and sizing machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180°, with top side down) "RBO" Model Ribaltatore Bjdpfx Acshvah Njbodi E) TURNING TRANSFER (crosswise/longitudinal), with double cone "RBO" Model GPK-2 F) STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Stanje: novo, Leto izdelave: 2024, SCHORR Ride-on Sweeper Electric Sweeping Machine Street Sweeper Floor Cleaner High-performance, low-noise sweeper for indoor and outdoor use. Equipped with an optional spray nozzle. The ride-on sweeper provides a comfortable and efficient solution for cleaning floors. The ergonomic seat and intuitive controls allow for effortless operation, even over extended periods. The powerful motor ensures thorough cleaning, even under demanding conditions. With a generous 80-liter collection container, large areas can be cleaned without frequent interruptions. This combination of comfort and efficiency makes floor cleaning a hassle-free and pleasant task. Standard LED work lights facilitate work in dimly lit areas. With an output of 1920 watts from 48V, the sweeper delivers ample power for over 4 hours of continuous operation. SCHORR Ride-on Sweeper RR80KM – Discover the Advantages: -- Fully electric ride-on sweeper with a 1,250 mm working width – ideal for large indoor and outdoor areas -- 48V/1920W performance -- 80-liter bagless rear collection container, easy to withdraw and empty Bjdpfeuac D Usx Acbedi -- Powerful 48V, 58Ah system -- With optional spray nozzle to reduce dust dispersion -- Extremely simple operation -- Outstanding maneuverability Technical Data Manufacturer (short name): SCHORR Manufacturer model code: RR80KM Drive: Ride-on Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tyres: PU (non-slip) Net weight: 400kg Basic Dimensions Collection container capacity: 80l Freshwater tank capacity: 10l Main brush diameter: 500mm Overall length: 1,600mm Overall height: 1,300mm Overall width: 1,250mm Sweeper width (without brushes): approx. 80cm *Further technical specifications are available upon request. The chassis is made entirely of flexible, robust plastic, minimizing potential damage to walls and similar surfaces. Other than the side brushes, nothing protrudes beyond the bodywork, allowing you to clean as close as possible to objects. The collection container is made of solid steel and can be easily removed from the rear of the machine. Sensitive components such as the front work lights are protected by a metal bumper. All in all, the machine is perfectly equipped for most applications. We usually keep all spare parts in stock and can deliver them quickly if you ever encounter a problem. Should you require technical support, we have the necessary technical expertise and can carry out repairs in our in-house workshop. Would you prefer to finance or lease the machine? No problem! We also offer attractive options for this. Just contact us and we will advise you on the various options. We look forward to your inquiry! If you have any questions about our ride-on sweeper, the SCHORR team will be happy to assist you. Our knowledgeable staff is available by phone or email. We look forward to hearing from you and assisting with your inquiry.

Leto izdelave: 2023, stanje: novo, ! Mašinos pasiūlymas klientams Lietuvoje, Latvijoje ir Estijoje. LVD PHOENIX lazeris yra skaidulinio lazerio pjovimo staklės, kurios išsiskiria dideliu dinamizmu ir lankstumu pjaunant storas medžiagas. PHOENIX modeliai siūlomi skirtingų dydžių: 3 m x 1,5 m, 4 m x 2 m ir 6 m x 2 m. Lazerio galingumas: nuo 4 kW iki 20 kW. Standartiškai staklės komplektuojamos su automatiniu keičiamu stalu, pjaustymo galva, adaptyvine kolimavimo sistema (iki 12 kW), talpine aukščio sekimo sistema, automatiniu antgalių valymu, automatinio lakšto atpažinimu, automatiniu pjovimo dujų pasirinkimu (deguonis, azotas, suslėgtas oras), aušintuvu ir dūmų ištraukimo sistema, SIEMENS valdymo bloku. PHOENIX lazerio pjovimo staklės suderinamos su plačiu automatizacijos sprendimų spektru: lakštų pakrovimo/iškrovimo, lakštų sandėliavimo iki 6 metrų, antgalių keitimo moduliais. Keičiamas stalas Visi PHOENIX lazeriai standartinėje komplektacijoje turi automatinius keičiamus stalus. Stalo aukštis – 930 mm. Stalo pakeitimo greitis priklauso nuo modelio dydžio: 3015 – 35 s, 4020 – 39 s, 6020 – 48 s. 4020 ir 6020 modelių stalai sudaryti iš 2 m x 1 m modulių, kurie lengvai keičiami ir aptarnaujami. Pjaustymo galva PHOENIX lazerio pjovimo staklių lazerio galia: nuo 4 iki 20 kW (galimi: 4 kW, 6 kW, 10 kW, 12 kW, 20 kW). 4–12 kW galios lazeriams naudojamas 150 mm arba 200 mm fokusavimo objektyvas, o galingiems 20 kW lazeriams – 250 mm fokusavimo objektyvas. Bdjdpfxoiy N Npj Acboi Rėmas PHOENIX 3015 modelis turi vientisą suvirintos plieninės konstrukcijos rėmą, užtikrinantį didelį greitį ir tikslumą. Dėl didelio rėmo standumo nereikalingi specialūs pamatai. PHOENIX 4020 ir 6020 modelių rėmai sudaryti iš keturių dalių: dvi standžios (kairė/dešinė) rėmo pusės sujungtos dviem prisukamomis sijomis.

Leto izdelave: 2010, stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring - Total installed power: 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION. Bdjdpfxjhknbro Acbei

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Bjdpeg A D Ansfx Acbodi Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm