CNC obdelovalni center za okna in vrata

BIESSE BIESSE ROVER C WMS 6.50

Stanje: dober (rabljeno), Sturdy crane system, ideal for glass storage or workshops, Load capacity: 3 t, Length: 14,250 mm, Width: 8,500 mm, Height: 3,650 mm Maximum hook height: 3,280 mm, Lodpfxjryv S Ae Aacjrh Maximum overall height: 3,950 mm.

Stanje: rabljeno, CNC obdelovalni center BIESSE Rover C 6.50 CONF.2, letnik 2007. -Delovna površina: cca 140 × 460 cm -Dimenzije stroja: 300 × 650 cm Lredpfow Rpd Sex Aacsh -Masa (teža) pribl. 6100 kg -Dve delovni glavi -Magazin: 22 mest -Vertikalni svedri: 28 kosov -Bočni svedri: 12 kosov Cena po dogovoru, na voljo takoj. Cena je brez DDV.

Stanje: zelo dobro (rabljeno), obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, Automatic Finger Jointing Line Grecon Dimter Ultra The machine has undergone a complete overhaul. Specification: Tenoner: Saw spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling spindle: - Spindle diameter: Ø50 mm - Usable spindle length: 210 mm - Max. tool diameter: Ø250 mm – Ø150 mm - Spindle speed: 6,000 rpm - Milling motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feeding table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Feed speed: Steplessly adjustable Dust extraction: Chipper extraction nozzle diameter: Ø100 mm Moulder extraction nozzle diameter: Ø150 mm Extraction capacity (airflow): ~2,400 m³/h Pneumatic system: Operating pressure: 6 bar Air demand: ~2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Joint Press CONTI M 6/6000: Press: - Strip width: 25 – 160 mm - Finished strip length: approx. 6,000+15-50 mm - Pressing force: 3 – 7.5 T (3,000 – 7,500 daN) Circular saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Dust extraction: - Saw extraction nozzle diameter: Ø100 mm - Extraction capacity (airflow): ~400 m³/h Pneumatic system: - Operating pressure: 6 bar - Air demand: ~2.5 m³/h at 6 bar (15 Nm³/h) Scope of refurbishment: 1. Cleaning of machine bodies and application of new paint 2. Replacement of bearings with new ones: on the main spindle of the tenoner; on the saw spindle of the press; linear bearings on the carriage guide of the tenoner table; bearings on the working belts. 3. Installation of a new glue nozzle with 3.8 mm pitch on the tenoner body, installation of a glue supply tank with safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic lines for cylinders, solenoid valves and other pneumatic components in the machines; 7. Replacement of gears and double-row chain in the conveyor/chain feed of the press. 8. Refurbishment of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic cylinders. Replacement of worn solenoid valves with new ones. 10. Replacement of operator panels with new graphic panels on the tenoner cabinet, press cabinet, and small press panel. Lrodpfx Aaeuddvaecjh 11. Replacement of buttons, indicator lights, and switches on control panels and control boxes. Replacement of terminal boxes with new ones. 12. Replacement of control units for the tenoner and press, customization of the machine's control software to customer requirements. 13. Installation of a new inverter on the press rollers and on the ejector pusher of the outfeed table; 14. Maintenance of electrical installation in control cabinets, modernization and creation of an electrical schematic diagram. 15. Installation of guards, meshes, and necessary descriptions, labels, safety signs, manufacturer’s logo, and nameplates. 16. Replacement of V-belts with new ones, inspection of pulleys; gear motors and motors. 17. Replacement of limit switches, inductive and optical sensors (photoelectric cells) with new ones. We specialize in wood jointing machines. Installation, commissioning, and operator training within Poland are included in the price; in other countries, these services are available at an additional charge. We provide service and spare parts availability.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a chip conveyor belt, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine we offer for sale. Contact us for more information. Working Table and Clamping • 8 ATS panel supports (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel supports and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops with 140 mm stroke, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops with 140 mm stroke, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, 140 mm stroke (2 left + 2 right), pneumatic system • 4 removable center stops, 140 mm stroke (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting support bars • 6 lifting support bars for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Processing Units and Configuration • C3-A1 configuration: • Device for fitting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for fitting units on a machining group with 5 interpolating axes (units can only be used when the electric spindle is vertical) • C3-P2 configuration: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • BH 42 L drilling head • Chain tool changer with 22 positions (180 mm center-to-center) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electrospindle or 15 kW 5-axis electrospindle (requires chip deflector device; requires flange for mounting units when using a 5-axis electrospindle; requires C-axis when using a standard electrospindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment Lsdpfx Aox D H Hcoacerh • Conveyor belt for removal of chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electrospindles or one electrospindle plus one liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 4.580 mm, širina obdelovanca (maks.): 1.650 mm, višina obdelovanca (maks.): 300 mm, premer orodja: 350 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machining Center 7235 Demonstration Machine Working Area: 4580 x 1650 mm, max. workpiece size for contour milling, minus cutter radius. Max. panel width loadable: 1,660 mm, max. workpiece height 300 mm Simple and fast suction cup positioning with the Holz-Her VI.SE LED Table. The differently colored LEDs indicate the position of the consoles & suction cups, including the rotational angle for rotatable suction cups. 8 consoles with 2 suction cups each, and electronic stop monitoring. The milling spindle has a power of 13.0 kW and accommodates milling tools with a maximum diameter of 200 mm via HSK interface, as well as saw blades up to 350 mm. Ideal for heavy-duty machining, e.g. in solid wood processing. 35 drilling spindles, of which 25 are vertical and 10 are horizontal. Two sawing units, one each in X and Y directions, for saw blades with max. 125 x 4 mm. Lrsdpfx Aasx E Afmecsh 24-position disc changer and 14-position pick-up changer, as well as a single-slot saw blade magazine for 350 mm saw blades, offer maximum flexibility for tool setup. Safe Detect – Safety monitoring instead of foot mats or light barriers. Waste conveyor belt integrated in the machine frame and many other features Delivery, installation, and machine instruction can be provided by us at an additional cost. The machine is currently located at our delivery warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Obdelovalni center Biesse Rover A 1542 Delovno območje X: 4140 mm Delovno območje Y: 1560 mm Delovno območje Z: 245 mm Lodpfx Aaoyh Nd Recsrh 5-osni elektrovreteno, vpenjalo HSK-F63 Navpične vrtalne glave: 17 Vodoravne vrtalne glave za X: 6 Vodoravne vrtalne glave za Y: 4 Žaga za utore Menjalnik orodij s 25 mesti Delovna miza z 8 prečkami

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), -Maksimalni prerez lesa: 300 x 2600 mm -Krožna žaga list D 900 mm -Motor krožne žage 18,5 kW -Hitrost vrtenja 1450 r/min -Zelo robustna in stabilna konstrukcija Lrsdpfx Ajcbq Nwjacsh BSP / CLT IZRAČUN – Določitev vrednosti za primerjavo 8.000 € nov ploščati motor 18,5 kW s prirobnico 4.300 € nov pozicijski zobniški motor 1.700 € nov list krožne žage AKE D 900 mm, Z 120 minus 10% 8.500 € nova elektro omara _____ 22.500 € brez jeklene konstrukcije in sestave -Specialna žaga je bila po obnovi uporabljena le cca 5 ur >> 100% Made in West Germany s 6-mesečno garancijo

Stanje: rabljeno, številka stroja/vozila: 008370, Delovno območje os X: 5055 mm Ledsx A Tk Sepfx Aacerh Delovno območje os Y: 1930 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 19 kW Število krmiljenih osi: 5 osi Maksimalna višina roba: 60 mm Število vrtalnih vreten: 29 Število orodnih mest: 31

Stanje: rabljeno, Leto izdelave: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting processing with wear plate Working length: 6250 mm (DYNESTIC 20.6 includes additional 4th stop in Y) Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles Gantry design for the moving column Helical rack-and-pinion drive in X and Y directions, ball screw drive in Z direction for precise positioning Technical data: Refer to the technical specifications for the DYNESTIC 7521 - 20.6. Please consult the relevant data sheets. Processing dimensions: Max. workpiece size for edge trimming: X = 6250 mm Y = 2100 mm Max. travel paths: X = 7360 mm Y = 2720 mm Z = 325 mm Max. bridge clearance, Dynestic table: Z = 1st level 318 mm / 2nd level 418 mm (from tabletop, without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage: 400 V, 50/60 Hz CONTROL SYSTEM: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection Requirement: High-speed internet access at the machine. DYNESTIC Table Solid, continuous processing table with grid partitioning, continuous grooves in X and Y directions, groove spacing 50 mm with 25 meters of sealing cord for clamping the wear plate 1 processing field with stop rails/stops, height 30 mm, pneumatically retractable 2 stop rails in Y direction and 1 stop in X direction on the right (seen from the machine front) Vacuum zones Single-circuit vacuum system Drilling unit 7976, 24 spindles Drive power: 3.0 kW 18 vertical spindles, individually selectable, arranged in L-shape: 10 in X and 8 in Y direction 32 mm pitch Max. drill bit diameter: 35 mm Drill overall length: 70 mm from mounting end (depending on panel thickness) Spindle stroke: 70 mm Rotation direction: Alternating CW/CCW n(max.) 1000 - 5710 rpm steplessly adjustable Mount: M10 thread - 11 mm fit (no tool, no holder) 6 horizontal spindles 2 double-drilling spindles in X direction (32 mm distance between 1st and 2nd horizontal spindle) 1 double-drilling spindle in Y direction Mount: M10 thread, 11 mm fit Max. drill overall length: 70 mm from mounting end (no tool, no holder) Free space 1 for: Optional double drilling spindle in X direction or Vertical adapter with double feed power Ljdpow I U Ecofx Aacjrh Free space 2 for: Optional saw in X direction or Vertical adapter with double feed power Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm steplessly adjustable, two-stage feed stroke Max. power at 12000 - 24000 rpm air-cooled with HSK-F 63 tool holder with right-

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: IMBDS63-52-10-45-2/SP/DC/SB, teža obdelovanca (maks.): 120 kg, delovna višina: 2.850 mm, moč: 35 kW (47,59 KM), potreba po zraku: 24.000 m³/h, priključek za stisnjen zrak: 6 letvica, The existing window painting system was in full operation until 19 December 2025 inclusive. The system is currently still connected to the electrical supply network, but will be replaced by a new robotic painting system as part of the turn of the year. The objective is to find a suitable subsequent user who will competently dismantle and transport the complete system on their own at the beginning of the coming year. System Concept Description Loading and unloading of the crossbeams with window frames and sashes is performed via a lifting/lowering station, which enables ergonomic and process-secure feeding of the system. Impregnation and priming of workpieces take place in a vertical flooding booth. The coating is applied using the flooding method via vertically arranged spray nozzles. This is followed by a drip-off and drying zone, with the crossbeams being conveyed at an inclined angle. First drying tunnel with a buffer capacity of approx. 40 crossbeams. Drying is performed by warm air generated via a hot water system with a flow temperature of approx. 85 °C. Switching unit for optionally feeding the workpieces either into a second impregnation/priming process or directly to the subsequent coating unit. Coating unit in the form of a lift stand with integrated electrostatic application (E-Static). Coating is carried out on one side, complemented by an automated turning unit, so that workpieces can be fed back into the spray system for a repeated coating pass. Lsdjx Npzcopfx Aacjrh Second drying tunnel with a buffer capacity of approx. 50 crossbeams. Here as well, drying takes place by means of warm air from a hot water system, with a flow temperature of approx. 85 °C. Buffer section after the second drying tunnel with a capacity of approx. 25 crossbeams, serving as a transfer area to the unloading station.