Formatna žaga

Altendorf Wa80

Stanje: dober (rabljeno), Leto izdelave: 2005, številka stroja/vozila: 05-01-540, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 10 h, moč: 5,5 kW (7,48 KM), največja višina reza: 800 mm, največja širina rezanja: 1.200 mm, premer žaginega lista: 305 mm, nastavitev nagiba žaginega lista: 90 °, vrsta nastavitve višine: električni, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, Oprema: dozator, vrtilna hitrost brezstopenjsko nastavljiva, zaščitni pokrov žaginega lista, Odlično delujoča žaga Gbjdoynf Uuopfx Anfel

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE Gbedpexnlgcofx Anfol 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, moč: 5,5 kW (7,48 KM), dolžina rezanja (maks.): 3.200 mm, širina reza pri vzporednem vodilu: 1.350 mm, Oprema: dozator, with scoring unit motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, current consumption 13.5A 400V 50Hz, saw blade max. D=400 mm, main motor 5.5 kW, extraction ports 1xD=120 mm 1xD=80 mm, electric height adjustment, electric angle adjustment – taken back from customer Gedpfewt A Ecsx Anfsbl

Stanje: novo, - Electromotoric height and tilt adjustment 0 - 46° for the main saw blade Gsdpfx Asvyurionfebl - Digital tilt angle display - Max. saw blade projection 150 mm, max. saw blade diameter 450 mm - Double roller carriage, carriage length 3000 mm, including stepless upper carriage lock - Parallel fence with manual adjustment, scale-based setting, including fine adjustment, cutting width 1000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3200 mm - Drive motor 4 kW (5.5 HP) with 1 speed, 4000 rpm - Tool clamping system AKE for main saw blade Art.-No. M19308 -Includes surcharge: 5.5 kW (7.5 HP) motor with 3 speeds

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Features and technical specifications: - Professional panel saw in heavy-duty construction - With scoring unit; externally adjustable with separate drive motor - Sliding table made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - With integrated on/off switch on the sliding table - With motorized height and tilt adjustment of the saw unit, digital display for tilt - Programmed control of saw blade height, tilt, and rip fence position - Swiveling control panel at eye level - Quality Made in Italy - Maximum cutting length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut capacity to the left of the saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45 ° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction port: 120 + 80 mm Gbjdjx Hbruspfx Anfol - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Stanje: novo, The ALTENDORF F 25 offers everything you need from a sliding table saw in a compact footprint. Whether for your first own workshop, daily operations, industrial production, or as a powerful secondary machine — the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be processed effortlessly thanks to outstanding precision, easy handling, and excellent cut quality. The single-sided tilting saw unit also allows for angle cuts. The smooth-running double roller carriage, based on the Altendorf system, is part of the standard equipment, as are the digital height and tilt displays. This machine is equally suited for beginners and professionals alike. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Prepared for retrofitting of a scoring unit ----- Technical Data ----- Swivel range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade diameter: 315 mm Max. projection of saw blade: 104 mm Non-CE version: max. saw blade diameter: 350 mm, max. saw blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speed: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm - Large extraction hood optional - Gbsdpfxju R S Hcj Anfjl - New demonstration machine -

Stanje: rabljeno, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: Variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Groove Cutting Machine FZS-2 Electronic with Continuously Adjustable Grooving Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Arrangement: Top Three-Phase Motor: 3 kW Spindle Diameter: 30 mm Speed: 2800 rpm Saw Blade Diameter: 400 mm * Automatic brake with speed monitoring * Infinitely variable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 Grooving Spindles, 50 mm Diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle Diameter: 50 mm Tool Diameter: approx. 360 mm Usable Length: 300 mm * Both grooving spindles positionable via ball screw Godpfx Aowgwlkenfobl * Fully programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Swing Table ----- * Swivel range: +/- 65° * Automatically changing backstop (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Backstop positioned in the cutting plane at every angle setting Special Equipment ----- Continuously variable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction Port Diameter: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show an identical model. Original photos currently unavailable. (Technical data according to manufacturer – subject to change!) All prices stated are net. VAT to be added as per statutory rate.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Features: - Sliding table made of anodized aluminum, incl. high-precision guide made of hardened and ground steel - Sliding table can be locked in any position - Saw blade guard with swing-away attachment - Extension arm with adjustable angle stop and length compensation every 5° and at 22.5° - Mitre gauge and eccentric clamp - Belt shifting for speed change from above (opening in the saw table) - Indicator lights for current saw blade speed - 3-axis programmable unit via 15" TFT touchscreen based on Windows, incl. 2,500 program slots, 2 USB ports, and 1 Ethernet network connector - Scoring unit with electro-motor driven height adjustment and motorized axial pulse adjustment, incl. digital display for height and width Gedpfx Aerrw Ucsnfobl - Angle stop with 3 stop flip fences; 2 fences with digital readout, 1 fence analog but can also be set digitally via coupling to a digital fence - Overhead control panel incl. automatic star-delta starting - Electrical system and safety devices compliant with CE standards Technical Data: - Saw blade tilt: 0° to 45° - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding table dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, scorer: 0.55 kW / 0.75 HP - Sound pressure level acc. to EN 27960: 84.4 – 86.3 dB(A) - Extraction nozzles: 1 x 120 mm, 1 x 100 mm - Angle stop extendable to 3,400 mm

Stanje: novo, Glazing Bead Nailer “2 P Jumbo automatic E.C.” – new – Your Benefits: - Corner joints are fully closed - No open glazing bead joints - No color mismatches when painting - Glazing bead frames easy to allocate Corner Stapling Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; Equipped with angle stop, top and front clamping device. Pressure can be adjusted separately. Insertion of parallel and stacked staples possible via electronic program control. Stapler unit can be mounted on a suitable work table, Operated via foot pedal. ----- Price for this configuration on request! Plus statutory VAT and packaging/shipping costs ----- Images show the 2P Corner Stapling Machine with the optional mobile work table (see surcharge details below) Surcharges: ----- Mobile Work Table: Height adjustable from 700 - 1000 mm, 2 removable support rails, 1000 mm long, 2 pivoting and sliding support rails, 1000 mm, support rails covered with felt, 4 swivel castors, 2 with locking device. ----- Surcharge: 1,311.00 EUR net Staples: Packages 15 mm staples (pack of 2000): Price 22.00 EUR 12 mm staples (pack of 3000): Price 32.00 EUR 10 mm staples (pack of 3000): Price 32.00 EUR Dimensions and Weights ----- Jumbo Automatic E.C: 470 x 370 x 300 mm, 35 kg Gsdpfx Anevnh T Nefjbl Work table: 32 kg All prices are net, plus VAT. Ex-works, plus packaging and shipping. (Technical data as per manufacturer – without obligation!)

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Gbsdpfx Anjfyadbjfjl Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg