Drsna namizna žaga

Altendorf Typ WA 80 TE

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigeration dryers, and a Beko oil-water separator, also by Atlas Copco, is available. Iedjxdc Uvspfx Al Njtf 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant amount: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control scope: 2-6 compressors. 5) Oil-water separator Beko ÖWAMAT 15, throughput capacity: 6m³-30m³/min, oil outlet: DN40, tank volume: 115.5l, operating volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. Total system hours: 8,656h, controller hours: 42,334h. Documentation available. On-site inspection possible.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, TERSA nožni valj s 4 noži, motor 5,5 kW, 400 V, 50 Hz, elektronska naprava za zagon in zaviranje. Nastavljanje debelinske mize s tipkami za hitro ali počasno nastavitev, natančnost do 0,1 mm, vgrajen števec delovnih ur, debelinska miza na 4 nosilnih vretenih s štirikratnim vodenjem. Dve podajalni hitrosti: 7 + 14 m/min. Ena gumijasta vhodna in ena gumijasta izhodna valjčka. Dva odsesovalna priključka Ø 160 mm, drsnik za zgornje odsesavanje. Zaščitna naprava za skobljanje SUVAMATIC. Moč motorja 7,5 kW. Krmiljenje pozicioniranja z nadzorom senzorjev vključeno. Itedpfxjx Ey Tzj Al Nef

Stanje: novo,

Stanje: novo, Leto izdelave: 2022, Dowel hole boring unit: no Drilling depth: 150 mm Slot length: 180 mm Height adjustment travel: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Itodpfsgq Un Aox Al Njf Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Equipment Options Ideal for demanding craftsmen and joiners The extra-long, one-piece surfacing tables ensure easy workpiece guidance. Work tables are made of cast iron, making them resistant to wear and permanently flat. Rearward, simultaneously opening surfacing tables with spring-assisted support for quick and convenient changeover. Thanks to the fixed-mounted extraction hood, changing the extraction hose during retooling is unnecessary—saving valuable working time. Helically serrated steel infeed roller ensures constant and even feed of the timber. Rubber outfeed roller at the thicknesser exit guarantees smooth timber discharge. Material feed with four speeds. Thicknessing table adjustment via handwheel with integrated display for planing height. On/off switch positioned conveniently for the operator. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising unit installation. Ijdjff Hdmepfx Al Netf Quality made in Italy. Dimensions and Weights Length approx.: 2250 mm Width/depth approx.: 1370 mm Weight approx.: 695 kg Surfacing Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Setup Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: The dimensions account for maximum travel or usable length. Thicknessing Thicknesser table length: 520 mm Thicknesser table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Itodpfxsv Erkas Al Nsf Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: rabljeno, Leto izdelave: 2008, without briquetting press Filter area 32 m² with hopper transition to container or connection to rotary valve Used, excellent condition, low operating hours Manufacturer: Schuko Model: Vacomat 300 Year of manufacture: 2008 Clean air unit / negative pressure Itsdpfovxlqmox Al Nsf GS dust-tested, BIA-certified CE type-certified Motor: 7.5 kW Connection diameter: 300 mm Pressure (Pa): 3090 Air flow rate: 5,800 m³/h Control panel Filter pressure monitor Extinguishing system: powder extinguisher New price approx. €17,000.00 Space requirement approx. 3,600 x 1,590 x 2,550 mm / 4,400 mm without hopper Location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty

Stanje: novo, Leto izdelave: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1500 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes with case-hardened, ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5 Linear bearing: Bosch Rexroth 35 Traverse speed: X, Y up to 45 m/min; C, A up to 6000 deg/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: double-sided master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW Spindle inverter: yes Maximum spindle speed: 24,000 rpm (option 6,000, 40,000, 50,000) Itedpfx Aon Nv H Sol Nef Construction: welded, ribbed, stress-relieved and precisely machined steel structure Table type: vacuum, hybrid, steel, aluminium with M16 or M18 holes #router #CNC #milling #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #pywood #particleboard #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Stanje: novo, Load capacity in kg: 1200 kg Fork length: 1150 mm Iodpfoifw Utsx Al Njtf Lifting height: 3000 mm Overall height: 2150 mm Machine weight approx. 0.625 t Dimensions (L x W x H): 1.71 x 0.8 x 2.15 m The ESL122 is a 24V/80Ah lithium-ion powered electric stacker. It features a high-strength chassis and a rigid mast, ensuring excellent operational stability. This model offers comfortable maneuverability and efficient, effective vertical stacking, making it ideal for use in confined spaces.

Stanje: novo, Leto izdelave: 2024, Panhans Mortising Machine Type: 116/10 - Maximum drilling depth: 145 mm - Maximum drilling length: 240 mm Itsdor Eli Tjpfx Al Njf - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm - Colour: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight: approx. 200 kg Robust German engineering Professional long-hole mortising and precise dowel drilling Stationary table, smooth-running, mobile drilling motor Mobility unit for increased versatility Cast table 700 x 380 mm, thick-walled and heavily ribbed Smooth-running cross slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limitation via left and right adjustable side stops Drill motor output 1.3 kW / 1.8 HP with motor brake and practical tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling unit for row drilling with indexing roller 16, 22, 25, and 32 mm; high-precision machined indexing, fixing via spring-loaded indexing pin Plug-in frame stop with indexing pin for positions: centre, left, right CE-compliant GS-tested Including additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - Immediately available -