Brizgalke za brizganje plastike s zapiralno silo 1.000 - 4.999 kN nakup rabljenega (503)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 32.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.000 kN, premer vijaka: 40 mm, Oprema: dokumentacija / priročnik, Clamping force: 100 t Screw diameter: 40 mm Vertical tie bar spacing: 410 mm Pgjdpfx Adsx Uqrysyeg Horizontal tie bar spacing: 460 mm Type: Horizontal Drive: Electric Operating hours: 32,426

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, vpenjalna sila: 160 kN, Zapiralna sila: 160 t Premer vijaka: 45 mm Tip: Horizontalen Pogon: Hidravlični Pgsdox Up T Nopfx Adyog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 73.437 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, skupna višina: 2.095 mm, skupna masa: 8.700 kg, največja dolžina izdelka: 5.155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design that increases flexibility and accessibility for various mold sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. The machine is equipped with a robot, ensuring efficient automation. If you are looking for a high-quality injection moulding machine, you should consider the Engel VICTORY 650/160 tech we have for sale. Please contact us for further details on this machine. • Operating hours: 73,437 h • Condition: Excellent • Operational status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar spacing: Tie-bar-less • Motor power: 22 kW • Heating power: 13.35 kW Pgjdpsx Nr Huofx Adyog • Number of electrical connector pins: 16 • Injection nozzle radius (tip): R35 • Centring ring diameter: 125 mm • Number of core pulls: 0 • Number of heating zones: 0 Additional Equipment • Robot included: Yes • Robot interface: Euromap 67

Stanje: dober (rabljeno), Leto izdelave: 2005, vpenjalna sila: 2.600 kN, Tiebarless Engel Victory 1800/260 Tech (2005) Clamping force: 260 t Screw diameter: 60 mm Shot weight: 687 g Shot volume: 763 cm³ Pgodpfx Adowu H A Uoysg Platen size: 1100 x 700 mm Mould height: 400 mm Maximum daylight opening: 2300 mm + ERC robot Type: Horizontal Drive: Hydraulic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 37.049 h, vpenjalna sila: 4.000 kN, skupna masa: 21.000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for high-precision plastic injection molding. Please contact us for further information on this machine. Pjdoydpvbspfx Adyogg Clamping Unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / reinforced: 800 kN • Maximum opening stroke: 700 mm • Minimum mold height: 350 mm • Distance between platen faces (max.): 1050-1550 mm • Clear tie bar spacing: 820 × 820 mm • Mounting platen dimensions (W × H): 1171 × 1171 mm • Maximum mold half weight: 4500 kg • Maximum ejection force: 100 kN • Maximum ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: – 4000-2100: 88.9 kW – 4000-3200: 96.2 kW • Color: Plastic-coated frame (light gray / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Power supply of injection unit: 1 × 16 A Injection Unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Backpressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heater: 1000 W | 1250 W Dimensions and Weights (Base Machine) • Clearance length: 490 mm • Electrical connection (fuse) motor + heater: 250 A • Electrical connection (fuse) motor: 125 A • Electrical connection (fuse) heater: 50 / 63 A Additional Equipment • SEPRO SR AXESS 30 S3 Robot (2008)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, vpenjalna sila: 4.200 kN, premer vijaka: 80 mm, injekcijska masa: 1.464 g, skupna višina: 2.500 mm, skupna masa: 25.500 kg, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, največja dolžina izdelka: 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection molding machine from Germany features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1200 cycles/h, it is ideal for high-volume production. Contact us for further information about this machine. • Electrical Data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN • Tie bar distance: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen size: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Moving platen opening stroke: 1400 mm • Injection Unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ Pgjdpfeydnp Hjx Adyog • Injection rate: 478 cm³/s

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, vpenjalna sila: 3.430 kN, premer vijaka: 60 mm, skupna višina: 2.397 mm, skupna masa: 21.000 kg, največja dolžina izdelka: 8.073 mm, This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It offers a clamping force of 3,430 kN, a screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8,073 × 1,930 × 2,397 mm, it is a robust choice for precision blank pressing. Contact us for further information about this machine. • Installed heating capacity: 27.5 kW • Total installed power: 85.6 kW • Control system: SYSTEM 800 • Interfaces: Euromap 67, Euromap 73 Clamping Unit: • Tie bar distance: 810 × 810 mm • Platen dimensions: 1,050 × 1,050 mm • Opening stroke: 700 mm • Mold height (min / max): 300 / 770 mm • Ejector stroke: 150 mm • Ejector force: 60.0 kN Injection Unit: • Injection speed: 300 mm/s • Injection pressure: 220 MPa • Holding pressure: 200 MPa Pgodpfxsydnbpo Adyog • Theoretical shot volume: 763 cm³ • Injection rate: 848 cm³/s • PS injection capacity: 210 kg/h • Screw speed: 0–350 rpm • Injection stroke: 270 mm • Nozzle contact force: 39.0 kN

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Plošča: NC5 Vpenjalna sila: 100 t Premer vijaka: 30 mm Razdalja med nosilci V: 420 mm Psdox Tdwyopfx Adyjgg Razdalja med nosilci H: 420 mm Tip: Horizontalen Pogon: Hidravlični Morda kupite Wittmann W818 linearni robot Z= 1500 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 2007057201, Ser. št.: 2.000.102 Absolutni števec ciklov: C120 = 048433176 Obratovalni tlak (bar): 210 Vbrizgalna sila (kN): 693 Zapiralna sila (kN): 2400 Podeyabfgopfx Adyegg Odpiralna pot (mm): 0-510 Višina montaže orodja (mm): 460-800 Nazivna napetost (V/Hz): 400 / 50 Nazivni tok (A): 136 Nazivna moč (kW): 75

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, vpenjalna sila: 1.000 kN, Spannkraft: 100 t Schraubendurchmesser: 30 mm Abstand zwischen den Holmen V: 420 mm Pgedpsx Tdp Nefx Adyeg Abstand zwischen den Holmen H: 420 mm Typ: Horizontal Antrieb: Hydraulisch Zusatzausrüstung: 1. 2 hydraulische Kernzugkreise an der beweglichen Aufspannplatte (Proportionalventile) 2. Zusätzliche Anschlüsse für 2 Kernzüge an der festen Aufspannplatte 3. Pneumatischer Kernzug (2 Kreise) an der beweglichen Aufspannplatte 4. 4-Zonen-Kühlwasserdurchflussregler mit Temperaturanzeige 5. Druckluftblasventile an der festen und beweglichen Aufspannplatte (programmierbar) 6. Integrierte Heißkanalregelung, 8 Zonen 7. Schnittstellen für externe Düsenheizbänder 8. Schnittstelle für integrierte Temperiergeräte (bis zu 6 Kreise) 9. Schnittstelle für Werkzeugtemperaturüberwachung (2 Kreise) 10. EUROMAP 67 für Automatisierungsgeräte

Stanje: rabljeno, Demag Ergotech 3300-840, stroj za brizganje plastike Demag, rabljeni stroj Pgodpfx Adsx Sqi Hoyog Proizvajalec: Demag, Sumitomo Model: Ergotech 3300-840 Skupne dimenzije (D x Š x V): 6,5 x 2,0 x 2,2 metra Lastna teža (brez olja): 13.800 kg TEHNIČNI PODATKI (GLEDE NA PREMER POLŽA) ----- Opis Enota "A" "B" "C" ----- Premer polža: [mm] 45 50 60 Razmerje L/D: [-] 20 20 20 Tlak vbrizgavanja (pri 400 °C): [bar] 2402 1946 1351 Volumen brizga: [cm3] 358 442 636 Teža brizga (PS): [g] 320 400 570 Moč grelca cilindra: [kW] 13,0 14,8 23,1 Vgrajena električna moč*: [kW] 58/68 60/70 68/78 ----- * Opomba: Vrednosti so višje pri električnem pogonu polža (WA). LASTNOSTI VBRIZGAVALNE ENOTE ----- Največji hod doziranja: 225 mm Maks. umik šobe: 470 mm Globina potopa šobe: 40 mm (SVO) / 30 mm (SPI) Sila pritiska šobe: 80 kN Električni pogon polža (WA): 20,5 kW Kapaciteta lijaka za material: 75 litrov SPLOŠNI IN HIDRAVLIČNI PODATKI ----- Kapaciteta rezervoarja za hidravlično olje: 700 litrov Moč črpalne enote: 45 / 55 kW Suh cikel (EUROMAP 6a): 1440 / 1600 h-1 Suh cikel (brez gibanja šobe): 1890 / 2100 h-1 Nenehna raven hrupa: 74 dB (A)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, ARBURG A 1500 T 1600-400 rotacijska miza (29.279 h) (S&P 3786) Leto izdelave: 2014 Obratovalne ure: 29.379 ur Polž: 35 mm Tlak brizganja: 2500 bar Vsebina brizganja: 154 cm³ Zapiralna sila: 150 t Razdalja med vodili: 1500 mm Minimalna višina orodja: 400 mm Maksimalna razdalja plošč: 700 mm Mere: 4600 x 1900 x 2300 mm Teža: 11.000 kg Priključna moč: 22 kW Premer mize: 1500 mm, 2-postajna (180°) rotacijska miza, 4-kratni izvlek jedra, izpihovalna naprava, vmesnik za barvalno napravo, vmesnik HHG itd... Cena: na zahtevo Pedjyff S Uopfx Adyjgg Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) vklj. robot KUKA (S&P 3788) Leto izdelave: 2008 Obratovalne ure: 36.061 ur Polž: 40 HVF mm Vbrizgalni tlak: 2000 bar Vbrizgalni volumen: 201 cm³ Pgedeyff S Iepfx Adyeg Zapiralna sila: 150 t Razdalja med vodili: 520 x 520 mm Minimalna vgradna višina orodja: 250 mm Maks. razdalja med ploščama: 1000 mm Mere: 5100 x 1600 x 2700 mm Teža: 7.250 kg Priključna moč: 60 kW Hidravlični akumulator, 4 x izvlek jedra, HHG vmesnik EM67, izpihovalna naprava, vključuje robotski sistem KUKA KR 5 arc, transportni trak, varnostna ograja Cena: po povpraševanju Kontaktna oseba: G. Ralf Schulz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, vpenjalna sila: 1.100 kN, premer vijaka: 135 mm, This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 11,000 kN. Take advantage of this opportunity to purchase the Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for further information. Clamping Unit • Clamping force: 11,000 kN Pgsdpex D Hd Iefx Adysg • Opening force (with pressure pad): 760 kN • Opening force: 615 kN • Opening stroke: 2,350 mm • Min. mould height: 700 mm • Max. mould height: 1,280 mm • Max. platen daylight: 3,050 mm • Platen size (horizontal × vertical): 2,340 × 2,040 mm • Tie bar spacing (horizontal × vertical): 1,575 × 1,320 mm • Tie bar diameter: 230 mm • Max. mould weight: 30,000 kg • Ejector stroke: 300 mm • Ejector force: 230 kN • Dry cycle (Euromap 6) - time: 5.2 s • Dry cycle (Euromap 6) - stroke: 1,100 mm Injection Unit 1 • Screw diameter: 135 mm • Dosing stroke: 570 mm • Max. shot volume: 8,159 cm³ • Max. screw speed: 120 rpm • Screw L/D ratio (3-zone): 20 • Plasticising rate (3-zone): 166 g/s • Screw L/D ratio (barrier): 22 • Plasticising rate (barrier): 256 g/s • Injection rate: 1,255 cm³/s • Injection rate at increased pressure: 915 cm³/s • Specific injection pressure: 1,170 bar • Specific injection pressure (increased): 1,600 bar • Nozzle stroke: 950 mm • Nozzle contact force: 150 kN • Heating capacity (standard): 93 kW • Number of heating zones incl. nozzle: 6 • Pump drive power: 130 kW • Oil capacity: 1,600 l Weight: • Net weight (clamping unit / injection unit): 62 t / 18 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 12.396 h, vpenjalna sila: 4.200 kN, premer vijaka: 70 mm, Ta DEMAG Ergotech 4200-2300 je bila izdelana leta 1998. Gre za hidravlični brizgalni stroj z zapiralno silo 4200 kN in vključenim Wittmann robotom. Razmislite o priložnosti za nakup tega hidravličnega brizgalnega stroja DEMAG Ergotech 4200-2300. Kontaktirajte nas za dodatne informacije. Pgodpfxex D Hyvj Adyeg • Wittmann vključen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, vpenjalna sila: 2.500 kN, Oprema: dokumentacija / priročnik, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Injection weight: 471 g (PS) Injection volume: 518 cm³ Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 kN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Max. opening stroke: 630 mm 5. Mold height (min./max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Max. injection speed: 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 - 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Machine Equipment:_ 1. BluePower servo pump drive system (energy-efficient servo hydraulics) 2. Hydraulic core pull 1× on operator side + pressure relief system 3. 8-circuit water manifold with solenoid valve shutoff 4. Hot runner control, 4 zones (ZE 88.5404) 5. MC6 control system with 19″ touchscreen TFT display Podpfexqhfysx Adyjgg 6. PV control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. Energy-saving servo drive system BluePower LRX 150 Linear Robot (Payload &lt

Stanje: rabljeno, Leto izdelave: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350/1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: open: 105 kN Pgjdpsxu Uvaefx Adyjg close: 95 kN Clamping plate dimensions (h x v): 1,060 x 1,095 mm Clearance between tie bars (h x v): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum opening distance: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Heating zones (barrel): 6 Dry cycle time: 1,550 1/h Oil capacity: 720 ltr. Dimensions and Weight: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mould weight: 4,780 kg Injection Unit: Working volume: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow rate: 527 cm³/s Screw speed standard/option: 285/349 rpm Screw torque standard or stage 1: 95 Nm Screw torque option or stage 2: 117 Nm Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT colour display and 3.5" floppy disk drive for data backup Plasticising: 1 complete thermoplastic plasticising unit in wear-resistant version, screw diameter 70 mm with check valve and open nozzle Nozzle radius: 15.00 mm Nozzle orifice: 6.00 mm 21126ä

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 ccm Clamping Unit: Clamping force: 400 t Tie bar distance: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, needle type, proportional valve controlled x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mold height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in pressure monitoring system by Sensor Kistler – mold pressure measurement Original Weber rotary table: highly precise, electrically driven by a servo motor controlled via frequency inverter Rotary table diameter: 1200 mm Rotary table available at additional cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servo motors: X, Y, Z (telescopic) Travel strokes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Pjdpfx Adeyctzfjyjgg Touch control panel Robot safety package Robot with adapter and protective housing Robot available at additional cost Dimensions: Weight: 21,000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of Manufacture: 2011 Injection Unit: Screw Diameter: 60 mm Shot Weight: 607 g Injection Pressure: 2,000 bar Dosage Volume: 664 ccm Clamping Unit: Clamping Force: 320 t Tie Bar Distance: 0x0 mm Platen Size: 1,510 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA – Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Operating Hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Controller with air valve Hydraulic core pull x 3 Hot runner control x 13 Injection unit hardened – bimetallic Main machine motor – servo motor driven by inverter Highly precise rotary table, driven by servo motor and controlled by inverter Rotary table diameter: 1,500 mm Pgsdeyctyuopfx Adyeg Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor – mold pressure control Conversion of the injection unit for vertical operation is possible Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in a live technical test at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Pedpfx Aoyctyhedyogg Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened – bimetal Machine equipped with cylinder / battery with compressed nitrogen (additional charge for high-speed operation) ECO – the machine features a system for setting the minimum mould height Robot – Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes are driven by servo motors (electric); C axis – pneumatic Axis stroke: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosage volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional Equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface 6x air valves 4x hydraulic core pulls with proportional valve control Hot runner control Hardened injection unit - bimetallic Proportional valve on the injection unit – precise dosing Podpfx Ajyctx Rodyegg Machine with two cylinders / battery with compressed nitrogen (extra capacity for fast operation) Machine is designed for operation with an electric rotary table. The machine is equipped with an inverter for servo motor control on the rotary table and an interface for rotary table connection Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/PS Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); Axis C and A movement Axis travel: X-550, Y-1400 (telescopic), Z-3500 Touch panel control Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor at extra cost Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53 x 1.77 x 3.29 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of technical tests of the selected machine, or participate in live technical demonstrations at our facility in Łódź. Price: on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 cm³ Clamping Unit: Clamping force: 200 t Tie bar distance: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping system: toggle lever Control: SELOGICA - touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Pjdpfsyctw Tjx Adyegg Air valve x 4 Hydraulic core pull x 2 Hot runner control x 12 Injection unit hardened - bimetal Main machine motor - servo motor powered by inverter - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine with cylinder / accumulator with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Arburg Multilift Select robot, 6 kg transverse Year of manufacture: 03.2011 4-axis robot: 3 axes driven by servomotors (electric); axis C - pneumatic Travel range for axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and protective housing Purchase of robot and conveyor belt at an additional cost Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Arburg 570C 2000-350/150 / Production Line with Side-entry Arburg Multilift Robot / 2K-Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 40 mm Shot Weight: 153 g Injection Pressure: 2120 bar Dosage Volume: 182 ccm Clamping Unit: Clamping Force: 200 t Tie Bar Distance: 570x570 mm Platen Size: 795x795 mm Ejector: hydraulic Clamping Unit: hydraulic Psdpfxoyctwyo Adyegg Control System: SELOGICA Additional Equipment: Production line with side-entry Arburg Multilift robot 2K machine / two-component Air valve x 1 Hydraulic core pull x 5 Hot runner control Reinforced injection units – bimetallic Proportional valves on injection units – precise molding Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are started up and tested by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of Manufacture: 10/2012 Injection Unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2,500 bar Dosage volume: 154 cc Clamping Unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional Equipment: 2K injection moulding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Hot runner control x 12 Reinforced injection units – bimetal Machine with two cylinders / batteries with compressed nitrogen (additional charge for high speed operation) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg conveyor belt and sorting chute Original Weber rotary table, very precise – electrically driven Purchase of rotary table and robot available for an extra charge Dimensions: Weight: 8,140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All machines offered are started up by our service technicians before sale. Pedpsyctwgofx Adyjgg It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pull, controlled by proportional valve x 2 Reinforced injection units – bimetallic Pgodpfxsyctwaj Adyjg Proportional valves on injection units - precision moulding Machine with two cylinders/batteries with compressed nitrogen (additional charge for rapid operation) Parallel movements Screw diameter in vertical injection unit: ⌀25 mm - 45 g/PS Original rotary table Purchase of rotary table at extra cost Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servo motors (electric); C-axis and A motion Travel on axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Robot safety package Robot with adapter, protective housing Purchase of robot at an additional cost Dimensions: Weight: 6720 kg Length/Width/Height: 4.41x1.84x3.20 m All machines offered are started and checked by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request