Brizgalni stroj Allround

Arburg 420 C Advanced 1300-675 190861

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), INJECTION MOLDING MACHINE KRAUSS-MAFFEI 150-700 C1 Lodpfx Ajh S Dncsdkohd Year: 1999 Screw diameter: 55 mm In excellent condition, still in operation

Stanje: dober (rabljeno), Leto izdelave: 2000, Clamping force: 100 tons Lhsdpjrthkujfx Adked Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm³ Shot weight: 127 g New temperature control board ARB 777 (cost: €2,750)

Leto izdelave: 2004, stanje: dober (rabljeno), številka stroja/vozila: UP 20_LIND, Used Motoman HP20 Model: HP 20 Controller: NX100 Year of manufacture: 2004.09 Payload: 20 kg Lhodpfx Adjfd Drrskod

Stanje: rabljeno, Leto izdelave: 1989, obratovalne ure: 74.900 h, vpenjalna sila: 850 kN, premer vijaka: 40 mm, skupna masa: 3.700 kg, Machine No. 145464 Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Lhodpfor Hrqrex Adkod Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Central computer, handling equipment, blow-off, diverter gate, core pull 1 hydraulic, mould temperature control 3 units. The machine comes with the following accessories, etc.: Complete 50-series thermoplast injection unit, selector valve, hydraulic infeed conveyor (height-adjustable, 3 levels) (integrated in control), external floppy disk drive (original Arburg), documentation and machine service reports from Arburg Service, machine setting CMD training materials (folder), electrical diagram, documents also available in digital form, oil filling (must be pumped into a container prior to transport; pump is available), electronic water manifold.

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), Zapiralna sila: 220kN, minimalna višina orodja: 200mm, maksimalni hod odpiranja: 200mm, maksimalna razdalja med ploščami: 400mm, hod izmetalca: 80mm, dimenzije stroja (D/Š/V): cca 2600mm/800mm/1600mm, teža: cca 760kg. Ogled na lokaciji je možen. Ledpfxow R Dg Uo Adkehd

Stanje: dober (rabljeno), Leto izdelave: 2006, Deli, prikazani ročno, niso vključeni. Lodpfx Aeych D Usdkehd

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, globina grla: 1.250 mm, Radial drilling machine Make: Breda Model: R 55-1250 Year: 1994 Ledpfx Adev Rpf Sokohd Technical Details Manufacturer: BREDA Model: R 55-1250 Arm reach: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron:70 mm Thread cutting in steel: M 50 Thread cutting in cast iron: M 65 Spindle taper: MT 5 Arm reach: 1250 mm Cross travel of spindle head: 930 mm Min./Max. distance from base plate: 536 – 1375 mm Vertical movement of arm: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speed range: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate size: 2070 x 910 mm Clamping area of base plate: 1325 x 910 mm Motor power: 4.4 kW – 380 V Dimensions (L x W x H): 2.1 x 1.0 x 2.5 m Weight: 3 t Accessories Drilling table: 750 x 600 x 550 mm Coolant system Hydraulic clamping All information is supplied without guarantee. A demonstration is possible at any time in our showroom.

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 144.381 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, For sale is an injection moulding machine from Arburg, model 520 C 2000-675. Ledpfx Asu Uuakodkohd Technical data: Year of manufacture: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW Transport and loading can be organised Europe-wide for an additional fee if required. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.

Stanje: novo, Leto izdelave: 2026, A professional folding machine with a 4.14 m working length, directly from the manufacturer Prod-Masz. Sheet metal thickness capacity: steel sheets up to 0.7 mm, bending radius: up to 160° for seam creation. Both cheeks are CNC-milled from solid material to ensure long-lasting durability. The machine is of robust construction, weighing in at 700 kg! Think there’s no company that can handle your bending needs? Think again! Prod-Masz is your bending specialist! Especially with our folding benches (Abkantbänke)! The sheet metal bending machine features a support at the exit for cut sheet metal, a protractor, angle stop, and gas pressure springs to facilitate easy raising of the bending beam. Maximum working width of the folding machine: 4140 mm Bending capacity: up to 0.7 mm (steel sheet) Bending angle of the machine: 160 degrees Bending beam thickness: 20 mm Cutting with the rotary shear across the full working width Upper beam can be raised in three positions Clearance opening: 80 mm Graduated scale Angle stop Depth stops Weight of the machine: approx. 700 kg Optional accessories: Lodpfxjcgmd Ue Adkshd Rotary shear (max. cutting capacity up to 0.8 mm / steel sheet): +350 euros Hand seam folder: +75 euros The machine is CE-compliant and comes with a 12-month warranty. Delivery: every week Shipping: 500 euros We look forward to your inquiry! Invoices are issued with 0% VAT as intra-community supply or plus 19% VAT for domestic deliveries.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 53.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 206432, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 570 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2.000 letvica, hod izmetalca: 225 mm, skupna masa: 7.450 kg, Oprema: dokumentacija / priročnik, Here we are offering, as an injection moulding machine dealer, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantages for Used Machines: From 01.07.2025, used machines can additionally benefit from a special depreciation allowance of 30% per year for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial Number: 206432 Year of construction: 2007 Operating hours: approx. 53,000 Control system: Selogica Lhjdpfx Adow Tt R Ijkjd Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well maintained – German origin Extras: - Complete thermoplastic cylinder, 50 mm, highly wear-resistant - Screw in HC-design instead of standard - Selogica direct control system - Hydraulic unit with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip extended 50 mm - Band heater for open nozzle - Band heater for extended nozzle tip - Central clamping platen set 570, Ø 125 mm - 2 ejector air blow-off units with pressure regulator - Connection for air blow-off unit 1 - Selector unit connection - Core puller 1 for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (to EUROMAP 67), 50-pin - Host computer interface ARBURG - Additional power connections: 1 CEE, 1 Schuko - Serial printer interface USB - CompactFlash interface for data storage - Operation authorization via chip card according to EUROMAP 65 - 1 additional heating circuit for nozzle or adapter with socket - Interface for dosing/coloring unit - Free manual cooling circuits - Machine-related cooling circuits regulated - Equipment package: Advanced Monitoring - Equipment package: Extended Movements - Equipment package: Production Control - Equipment package: Optimization/Operator Assistance - Equipment package: Quality Assurance - Equipment package: Documentation Complete documentation included Injection Unit: - Screw diameter: 50 mm - Shot weight: 359 g/PS - Injection pressure: 2000 bar - Shot volume: 392 ccm Clamping Unit: - Clamping force: 200 t / 2000 kN - Tie bar distance: 570 x 570 mm - Mounting platens: 795 x 795 mm - Mold height: 300 mm - Max. platen distance: 950 mm - Opening stroke: 650 mm - Ejector stroke/force: 225 mm / 66 kN - Hydraulic clamping unit Motor output: 22 kW Heating capacity: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hanover, Germany and has been tested. Warranty: Warranty is valid until initial commissioning. Loading/Shipping: Loaded free onto buyer’s truck or delivered free to buyer’s premises (shipping charges apply) Available from our warehouse in Hanover, Germany Information about our offered machines and our company: - We only sell our own machines, acquired from ongoing production, from our Hanover warehouse - All machines offered are tested and checked prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property - All machines offered come from successful companies where maintenance and servicing are standard practice - All offered machines are available for inspection at our warehouse