Horizontalne tračne žage – ročne – okroglo območje rezanja 221–299 mm nakup rabljenega (79)

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Hfedpfx Abod Du T Is Tor Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Stanje: novo, Leto izdelave: 2025, Cutting diameter: 240 mm Saw blade length: 2910 x 27 x 0.9 mm Cutting width: 310 mm Table height: 900 mm Cutting speed: 35 + 75 m/min Total power requirement: 1.1 / 1.8 kW Machine weight: approx. 470 kg Space requirement: approx. 800 x 1720 x 1450 mm Standard features of the MEBAbase 24 DG-HS: - MEBA mitre system: Large, swiveling table prevents saw cuts into the material support surface – reduced wear costs! Material is always clamped at a right angle close to the saw blade. - Manual mitre adjustment from 90° to 30°, steplessly adjustable via scale, with 1.0° accuracy - Mitre rotation point is the intersection of the saw blade and material stop, so no change in length occurs when the angle is changed - End stops at 30° – 45° – 90° – 45° - Hydraulic material clamping. Material is always clamped parallel at 90°, regardless of saw frame angle - Centralized machine control - Cutting pressure reduction via own weight of the heavy, torsion-resistant saw frame and fine adjustment according to material cross-section, using hydraulic damping cylinder and counterbalance spring - Saw blade drive with automatic end stop - Infinitely adjustable clamping jaws - Movable blade guide arm, adjustable to material width - Saw blade deflection rollers with carbide guides - Practical chip tray with drip screen Hfodpfxowa Ui Te Ab Tor - Permanently engaged chip cleaning brush - Mechanical saw blade tensioning - Operating manual and spare parts list (digital) - 1 MEBA bimetal saw blade 4/6 TPI mounted on the machine - Complete coolant system - Paint finish anthracite (RAL 7016)

Stanje: novo, Leto izdelave: 2025, PREMIUM LINE Series Machine. Cormak S200R Manual Bandsaw, designed for industrial use. This metal band saw offers high cutting accuracy, thanks to its robust cast iron rotary table synchronized with the pivoting saw arm. The band saw is ideal for large-scale industrial plants, capable of operating up to 16 hours per day. Mitre cutting possible from -45º left to 60º right. Machine Features CORMAK S-200 R MANUAL metal band saw, conforming to CE, enables straight cuts perpendicular to the material axis as well as mitre cuts at any angle between -45° and +60°. Material feed can be performed manually or using any feeding device. Hedpjfy Ttisfx Ab Tsfr Cutting feed is gravity-based, using controlled oil flow inside a double-chamber hydraulic cylinder. The descent speed of the arm is regulated by a valve adjusting oil flow between chambers. The operator starts the machine with the start button and sets the cutting speed. After completing the cut, the machine stops automatically and the arm is manually raised to the start position. Material feeding is manual. The vice is mounted on an adjustable bed and features a quick-release clamping system. The blade guides are equipped with carbide tips and rolling bearings. The CARBIDE BLADE GUIDES ensure superior accuracy and straightness of cut. The arm features an automatic blade tension sensor and is tilted at a 25-degree angle to extend blade life. A brush is installed under the arm for optimal blade cleaning and performance. The drive is transmitted through an oil-filled worm gearbox. The machine is powered by a three-phase motor with double windings, providing two cutting speeds. Motor overload protection. The machine offers two band speeds: 35 and 70 m/min. Components such as the arm, vice, and rotary table are made from cast iron. Closed-loop coolant system. The machine comes with a fence and scale for material length positioning. The robust base is a rigid steel cuboid housing the coolant reservoir and coolant pump. Safety is ensured by an electrical system compliant with all CE standards. The machine is equipped with a limit switch that stops operation after cutting, an emergency stop button ("mushroom type"), and several microswitches that interrupt power when covers for the drive belt or the blade are opened. Technical Data TYPE: Gravity feed ARM MOVEMENT: Gravity with stepless descent regulation BAND SPEED: 36/70 m/min MITRE RANGE: 45° left to 60° right VICE: Manual MINIMUM CUTTING DIAMETER: Ø 5 mm MINIMUM MATERIAL LENGTH IN VICE: 30 mm VICE BASE HEIGHT: 890 mm BAND SIZE: 27x0.9x2910 mm TOTAL POWER: 2.1 kW DIMENSIONS (LxWxH): 1600 x 800 x 1400 mm WEIGHT: 500 kg Max. Cutting Range [mm] Angle Round Rectangle Square 0º ø250 320 x 240 240 x 240 45º Left ø200 220 x 120 190 x 190 45º Right ø220 235 x 120 210 x 210 60º Right ø110 155 x 110 100 x 100 For more information, please visit our website.

Stanje: novo, - 2 speeds - Mitre cutting Hfedpfx Absrt Rp He Ter - Hydraulically adjustable cutting pressure - Quick-release vise - Coolant system - Automatic discharge - Saw blade: 2455 x 0.9 x 27 mm - Emergency stop - Documentation - 400V