Preskušanje materialov nakup rabljenega (485)

Stanje: zelo dobro (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Test Chamber Volume: 335 liters Performance for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for Climatic Testing: Temperature range: +10°C to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm 1 port Ø approx. 50 mm, left side 2 ports Ø approx. 125 mm, left side 1 port Ø approx. 125 mm, right side Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as the buyer, please note the following: The following procedures are carried out in advance on all our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Gkedpfxjxufyps Ab Tjf Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test Chamber Nominal Volume: 280 liters Dimensions: Chamber external: Width 1,540 mm x Height 2,090 mm x Depth 1,240 mm With fan motor and door removed: Width 1,540 mm x Height 1,940 mm x Depth 925 mm Test chamber interior: Width 720 mm x Height 690 mm x Depth 560 mm Gkedpfjqxavajx Ab Tjf Door, clear opening: Width 720 mm x Height 690 mm Viewing window, heated: Width 500 mm x Height 600 mm External dimensions with doors open: Width 2,340 mm x Height 2,090 mm x Depth 2,165 mm Feedthroughs: 2 pieces, side wall left, diameter 100 mm Temperature range -70°C to +180°C Heating rate: 3.0 K / min Cooling rate: 3.0 K / min Power supply: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 Important information for buyers for your safety! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Specifications and technical details subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Primus Engineering Type: DST 350 This test facility was designed for conducting IP protection class tests "dust" according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test facility is intended for testing technical components under the influence of dust and vacuum within the limits specified in the technical data. Operation / HMI Control panel with display and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 KW Supply voltage: 400V/50HZ 3-N/PE (16A EEC socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% r.h. to 75% r.h., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Gedjrt U Nuspfx Ab Tokf Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you an RMS electrodynamic vibration system. RMS Electrodynamic Vibration System Test Manager SWR 900 Module Carrier SWE 348 Charge Amplifier SWE 366 Gjdpfx Aedyh E Hsb Tjkf Charge Amplifier SWE 366 Power Supply SWE 350 Type: Test Manager SWR 900 Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications excepted!) If you have further questions, we are happy to answer them by phone. Written orders can be placed by email or fax.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss climate test chamber. Model: SB2/500/80 Water-cooled Cooling & heating range: -75°C to +180°C Climate range: +10°C to +95°C Humidity range: 10% to 98% relative humidity Temperature stability, temporal: ± 0.2K Humidity stability: ±1% r.h. Temperature change rate: Gkedpjm Tvzcofx Ab Tof Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height: 1980 mm, Width: 1265 mm, Depth: 1365 mm Feed-throughs: Left side: ∅ 100 mm Right side: ∅ 50 mm Connection voltage: 400V / 3Ph+N+PE / 50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerants: R404a / R23 For your security as a buyer, please note the following: The following steps are carried out in advance on our offered chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a test run, monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a chamber recirculation oven. Internal dimensions: height 900 mm / width 600 mm / depth 600 mm Usable volume: 324 liters Gkedpfxeigg Eqe Ab Tef External dimensions: height 1775 mm / width 900 mm / depth 953 mm Door leaves: 1 Connection: 3x400V 50 Hz 13 kVA Heating capacity: 12 kW Rated temperature: 300°C Weight: 400 kg Type: KU 300/09-06-06 K111183701 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch Temperature Chamber, water-cooled Test chamber volume: 110 liters Internal dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatial: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerant: R-404A / R 23 Voltage: 1/N/PE AC 230V ±10% 50Hz Nominal power: 1.8 kW Nominal current: 12 A Model: VT 7011 For your assurance as a buyer, please note the following information! The following procedures are carried out in advance on all chambers offered: 1. Functional check and replacement of necessary components 2. New charge with legally compliant refrigerant 3. After successful testing, the chambers undergo a trial run, monitored with calibrated instruments. Gsdpjhrdy Sjfx Ab Tjkf Condition: used Scope of delivery: (See picture) (Specifications and technical details are subject to change and errors!) For any further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Temperature Test Chamber We offer you a CTS temperature test chamber. Water-cooled Series: T-40/600 Includes metal struts for increased floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 For your safety as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilled with refrigerant compliant with legal regulations 3. After successful inspection, the chambers undergo a test run that is monitored with calibrated instruments. Condition: used Scope of supply: (see image) (Technical specifications subject to change and errors excepted!) Gjdpfx Abehxyg Ho Tjkf Feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature test chamber. Weiss temperature test chamber with S!MCON / 32 controller, water-cooled Control unit: "Touchpanel" All control and operation commands can be initiated simply by touching the function symbols on the 'touchpanel' control unit. Leveling feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to ensure adequate ventilation of the machine components. Access ports The test chamber is equipped with access ports on the right and left sides. Through these, measuring cables and test devices can be routed into the test chamber. Standard access ports installed: R1: DN 125 mm L1: DN 50 mm (Refrigerant converted to R-452A) Test space volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature test data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable volume: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation: max. 2500 W Gkodpfsrak Rmex Ab Tef Operating data: Test chamber lighting: Halogen bulb, 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Main fuse (customer-provided): 16 A, slow-blow Sound pressure level: Measured at 1m distance from the front, 1m height: 58 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) If you have any questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature test chamber. Weiss temperature chamber with S!MCON / 32 control, air-cooled (Refrigerant converted to R-452A) Control unit: Touch panel All control and operating commands can be activated on the touch panel simply by touching the function icons. Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs Feedthroughs are integrated into the right and left sides of the test chamber. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: nominal width 125 mm L1: nominal width 50 mm Test chamber volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Gsdpfjrak S Dox Ab Tokf Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature test specifications: Temperature range: -42 to +180 °C Temperature deviation over time at chamber center: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Operating data: Test chamber lighting: Halogen lamp 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, rated power 7.8 kW Customer-side fuse: 16 A slow-blow Sound pressure level: Measured at 1m distance from the front, height 1m: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as a buyer, please note the following information! The following measures are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and specifications!) We will be happy to answer any further questions by telephone.

Stanje: zelo dobro (rabljeno), Weiss temperature chamber Here we offer a Weiss temperature chamber. Gsdpfxsp Dun Ao Ab Tekf Weiss temperature chamber, air-cooled, with Weiss condenser chiller Test chamber volume: approx. 990 litres Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the centre of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 5 K/min Cooling: 5 K/min Heat compensation: max. 2750 W Feedthroughs included as standard: R1: NW 125 mm L1: NW 50 mm Dimensions: Test chamber dimensions: width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm Maximum load (evenly distributed over the floor area of the test chamber): 150 kg Per shelf: 50 kg Total shelf load: 100 kg Operating data: Test chamber lighting: halogen lamp 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 27.0 kW Rated current: 42.02 A Heat emission for water-cooled test chambers: max. heat emission to ambient: 1.3 kW Noise measurement: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Type: WT11-1000/70/5 For your safety as a buyer, please note the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is subject to confirmation!) For any further questions, please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Zwick / Roell tensile testing machine (table-top testing machine). Zwick / Roell Materials Testing Machine Model: BDO-FB0.5TH - Load testing in tension/compression direction: 500 N - Height: 1565 mm, Width: 292 mm, Depth: 469 mm - Width of test area: unlimited - Test area depth: 100 mm - Max working stroke without accessories: 1266 mm - PC or printer interface: RS 232 - Required PC connection (for PC operation): COM 1 - Power specifications: 115/230 V (PH, N, PE) - Rated power: 0.4 kVA - Mains frequency: 50/60 Hz - Weight: 47 kg - Type: BDO-FB0.5TH - Condition: used - Scope of delivery: (see pictures) (Subject to change and error in technical data and specifications!) If you have any further questions, we are happy to answer them by phone. Gjdpfsd Sr S Iex Ab Tokf

Stanje: zelo dobro (rabljeno), RMS vibration exciter with power amplifier and cooling fan We offer you an RMS vibration exciter with power amplifier. Vibration Exciter SW 1507 Max. force: 2,158 N Max. velocity: 1.3 m/s Power Amplifier TGA 1500 3 x 380V / 50Hz / 35A / 8 kVA Condition: used Scope of delivery: (see picture) Godsgkafijpfx Ab Tskf (Subject to modifications and errors in the technical data. All information is non-binding!) If you have further questions, we will be happy to answer them by phone. Written orders can be placed via email or fax.

Stanje: zelo dobro (rabljeno), RMS Vibrations Test System We offer you an RMS electrodynamic vibration test system. RMS Vibrations Test System Test Manager SWR 900 Vibration Exciter SW 3006 30V-50A-3434 N Power Amplifier TGA 3000-000.00 Condition: used Untested! Tests could not be performed. Scope of delivery: (see picture) (Technical data, specifications subject to change and errors!) For further questions, we are happy to assist you by phone. Written orders can be placed via email or fax. Gkjdsgk I I Tepfx Ab Tsf

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — Godpfxsklv H Ij Ab Tekf - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.

Stanje: zelo dobro (rabljeno), Feutron Temperature Test Chamber We are offering a temperature test chamber here. Feutron Temperature Test Chamber, Air-Cooled Test Chamber Nominal Volume: 280 liters Dimensions External dimensions (chamber): 1500 x 2040 x 1075 mm With fan motor and door dismantled: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature range: -70°C to +180°C Heating rate: 4.0 K / min Cooling rate: 0.6 K / min Power supply: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 For your safety as a buyer, please note the following information! The following procedures are carried out on all chambers offered by us in advance: 1. Functional test and replacement of necessary components Gedpfx Abok Scxms Tjkf 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated instruments. Condition: used Scope of delivery: (See picture) (Subject to modification and errors in the technical data and information!) If you have further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), Here we offer you an S & A test chamber for parametric testing. Temperature range: -55 °C to 200 °C (LCO2) -65 °C to 200 °C (LN2) Temperature change rate: 15 °C / min (standard option) 60 °C / min (fast option) Stability: ± 0.2 °C (including effects from mains voltage, ambient temperature between 15° and 45 °C, and aging) Uniformity: ± 1.0 °C max from -65 °C to -55 °C ± 0.5 °C max from -55 °C to +125 °C ± 1.0 °C max from +125 °C to +200 °C Coolant: LCO2 The chamber can be remotely controlled via IEEE bus or RS232C interface. Weight: approx. 61 kg Type: 4365A Condition: used Gkjdpfjcnic Dsx Ab Tof Scope of delivery: (see image) (Subject to changes and errors in technical specifications. All information without guarantee!) If you have further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a climate test chamber. Air-cooled Test chamber nominal volume: 280 liters Dimensions External dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K /min Cooling rate: 0.6 K /min Climate range: +10 to +95 °C Humidity range: 10 to 95% r.h. Humidity variation over time: ≤ ± 3.0 Water supply for humidifier: Mains water or distilled water, 20 l storage tank Power supply: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a Gkjdsiz Tqcopfx Ab Tof Important information for your safety as a buyer! The following procedures are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) If you have further questions, we are happy to answer them for you by phone.

Leto izdelave: 1996, Stanje: dober (rabljeno), Here we offer a Voetsch drying oven / heating cabinet / heat oven. Voetsch NTU 60/60 250°C Gkjdpfx Asbqh I Ssb Tsf Rated temperature: 250°C Supply voltage: 400 V 3 (N) PE AC, 50/60 Hz Internal dimensions: Width 600 mm / Height 600 mm / Depth 600 mm External dimensions: Width 1000 mm / Height 1675 mm / Depth 1300 mm Circulating air fan Type: Voetsch NTU 60/60 Scope of delivery: (see picture) (Subject to alterations and errors in the technical data; all information is non-binding!) If you have any further questions, we would be happy to answer them by phone.

Stanje: dober (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-cooled Manufacturer: Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Performance for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature gradient: 1 to 4 K - Rate of change: * Cooling: 6.7 K/min Gkodpfx Abjxmhyco Tsf * Heating: 6.8 K/min - Heat compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature calibration points: +23°C and +80°C Performance for Climatic Testing: - Temperature range: +10 to +95°C - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1.0 K - Temperature gradient: 1 to 2 K - Humidity range: 10 to 98% - Temporal humidity deviation: ±1 to ±3% - Dew point range: -3 to +94°C - Heat compensation: 400 W - Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test Chamber Dimensions (W x D x H): 580 mm x 765 mm x 750 mm External Dimensions (W x D x H): 870 mm x 1595 mm x 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important Information for Your Safety as a Buyer: The following procedures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data. All information is non-binding!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated easily by touching the function icons on the »Touch Panel«. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine components, the test chamber is equipped with adjustable feet. Feed-throughs Feed-throughs are fitted on both the right and left sides of the test chamber. These allow test leads and testing devices to be routed into the test space. Feed-throughs come as standard: R1: nominal width 125 mm L1: nominal width 50 mm Test Space Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ±0.1 to ±0.5 K Spatial deviation: ±0.5 to ±2.0 K Temperature change rate in accordance with IEC 60068-3-5: Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at center: ±1 to ±3 % RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12.0 A Power cable: 3.5 m Fuse protection: 16 A slow-blow, to be provided by buyer Refrigerants: R-404A and R-23 Test Chamber Volume: approx. 190 liters Weight: approx. 460 kg net For your safety as buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) Gsdpfxjxugirj Ab Tokf (Technical specifications and information are subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Feutron Type: 3416/17 Air-cooled Temperature Test Chamber Test Chamber Nominal Volume: 280 liters Dimensions: Gsdou E N Tispfx Ab Tjkf Chamber exterior: Width 1540 mm x Height 2090 mm x Depth 1240 mm With fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test area: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Heated viewing window: Width 500 mm x Height 600 mm Installation dimensions of the temperature test chamber with doors open: Width 2340 mm x Height 2090 mm x Depth 2165 mm Feedthrough openings: 2 pieces, left side wall ∅ 100 mm Temperature range: -70°C to +180°C Heating: 3.0 K/min Cooling: 3.0 K/min Power supply: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Refrigerant: R507 / R23 Condition: used Scope of delivery: (See photo) (Subject to technical modifications and errors; specifications may change without notice!) For further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Weiss Type: WK-340/70 air-cooled Test chamber volume approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1805 mm, Width 780 mm, Depth 1700 mm Key data for temperature tests: Temperature range: -70 to +180 °C Temperature fluctuation over time: ±0.1 to ±0.5 K Temperature fluctuation spatially: ±0.5 to ±2.0 K Temperature change rate – Heating: 3 K/min Temperature change rate – Cooling: 2 K/min Key data for climate tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r.h. Temperature fluctuation over time: ±0.1 to ±0.3 K, spatially: ±0.5 to ±1 K Humidity fluctuation in the center of the usable chamber: ±1 to ±3% r.h. Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Connected load: approx. 4.1 kW Rated current: 14.0 A Sound pressure level: approx. 60 dB(A) Gkjdpfx Aov Uap Njb Tjf Weight: approx. 500 kg Refrigerant: R404A / R23 For your safety as a buyer, the following information! The following measures are carried out on the chambers we offer prior to delivery: 1. Function check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information are excepted!) If you have any further questions, we will gladly answer them by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VCS³ 7027-10 Vötsch Climate Test Chamber, Water-Cooled With a temperature change rate of 10 K/min Temperature Testing Data: Temperature range: -72°C to +180°C Temporal temperature deviation at center of test space: ±0.3 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Temperature change rate: Heating: 10 K/min Cooling: 14.5 K/min Climatic Testing Data: Temperature range: +10°C to +95°C (Extended climate range: 2°C/95% r.h. controlled for max 2h) Temporal temperature deviation at center of test space: ±0.2 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation at center of test space: ±1% to ±3% r.h. Humidity range: 10% to 98% r.h. (Extended climate range: 2°C/95% r.h. controlled for max 2h) External dimensions: Width 780 x Depth 1895 x Height 1775 mm Test space dimensions: Width 580 x Depth 615 x Height 750 mm Test space volume: approx. 270 liters Side port: 50 mm Side port: 125 mm Operating Data: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse (on-site): 63 A slow blow Refrigerant: R404A/R-23 Weight: approx. 835 kg For your safety as a buyer, please note the following information! The following measures are performed in advance for our offered chambers: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant, if required Gjdov R Ty Topfx Ab Tokf 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications subject to change; errors and omissions excepted!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Model: VCS 7018-5 Climate Test Chamber with Humidity, Water-Cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Overall dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Specifications for temperature tests: Temperature range: -70°C to +180°C time-wise deviation: ± 0.1 to ± 0.5 K spatial deviation: ± 0.5 to ± 2.0 K Temperature gradient: 1 to 4 K Temperature change rate according to IEC 60068-3-5 Heating: 7.5 K/min. Cooling: 7.5 K/min. Specifications for climate tests: Temperature range: +10 to +95°C Humidity range: 10 to 98 % r.H. Time-wise temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3 % r.H. Dew point range: -3 to +94 °C Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 10 kW Rated current: 21 A Protection: 32 A slow-blow, to be provided by customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 litres Weight: approx. 460 kg For your safety as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. New refill with legally compliant refrigerant if needed 3. Leak test with certificate Gkodpfx Aev N Hc Esb Tjf 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and data subject to change and error!) We are happy to answer further questions by phone.