Preskusna komora za parametrični preskus

S & A -55°C bis +200°C 4365A

Stanje: novo, Hebezeuge von 5 bis 10 t Gewicht Transportwagen von 5 bis 30 t Gewicht Große Auswahl Duedoi Akpdspfx Aflsl Neu im Bestand

Stanje: rabljeno, New diesel generator set, power generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 New, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby power: 55 kVA / 44 kW Rated current: 33 amps Voltage: 400/230 volts, 50 Hz    230 volts, 50 Hz Fuel tank capacity: 99 liters – provides an operating time of up to 8.5 hours at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby: approx. 4 liters/hour Dsdpfx Aoxlkq Ujfleul Drive engine: 4-cylinder inline diesel engine RICARDO ZH4105ZD Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple, compact construction with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) - 1x CEE 16 amp socket (5-pin, 400 V) - Terminals for cable power connection for external consumers, e.g. site distribution boxes - ATS module for mains backup operation, enabling automatic emergency power switchover in the event of mains failure Space requirement (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg Brand new machine from stock

Stanje: pripravljen za uporabo (rabljen), Forklift truck Manufacturer: Jumbo Model: J60 DC12 Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours Sale due to changeover to wheel loader All service and lubrication intervals have been fully documented and carried out in accordance with the inspection log! All filters (hydraulic, fuel, torque converter, air) have been replaced annually. Engine oil and oil filter changed every 250 operating hours. Only B0 diesel fuel has been used (no B7). Immediately available - fully operational Dodpovtwuaofx Afloul Location: Austria, near St. Pölten

Leto izdelave: 2023, Stanje: novo, On-site nitrogen generation system for the production of a wide range of purities, pressures, and flow rates. The system is composed of high-quality components such as filters and adsorbers, a nitrogen separation unit from Parker Hannifin, and compressors from Kaeser. If high-pressure compression is required, we cooperate with Bauer Kompressoren. Over 400 such systems have been installed for our customers. Dodpfx Afonq Di Tjloul All systems are custom-assembled and adapted by us to your spatial requirements and operational needs. We also design and implement containerized systems for both indoor and outdoor installation. We look forward to your inquiries...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 tons Screw diameter: 40 mm Operating hours: 77,890 h Dodod Tnbhspfx Aflsul Tie bar distance: 420 x 420 mm

Stanje: generalkompletno obnovljen (rabljeno), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measurement uncertainty 4.0 + 4.5L/1000 (in original condition, currently significantly improved after modernization) Fully modernized in 2018 with Pantec Controller Eagle Pro Probe system: Renishaw PH10MQ with SP25M Completely new software: Inca Premium (other software options available upon request) HP Workstation PC Duodedpak Ropfx Aflsl Optional: Laser scanner (e.g. Kreon) Probe changer Rotary table, etc.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL DATA: Injection Unit: - Screw diameter: 135 mm - Screw stroke: 610 mm - Injection volume: 8,731 cm³ - Shot weight (PS): 7,860 g - Screw speed: 125 rpm - Screw torque: 14,000 Nm - Max. screw torque (at reduced speed): 15,630 Nm - Plasticising rate (3-zone screw): 222.9 g/s - Plasticising rate (barrier screw): 279.2 g/s - Injection rate: 1,904 cm³/s - Plasticising pressure: 1,648 bar - Max. injection pressure: 2,000 bar - Nozzle stroke: 1,100 mm - Nozzle contact force: 210 kN - Material cylinder: L/D = 25 - Number of heating zones (incl. nozzle): 8 - Heating power: 88.5 kW Clamping Unit: - Clamping force: 20,000 kN - Minimum clamping force: 2,000 kN - Opening force with cushion: 1,600 kN - Opening stroke: 3,000 mm - Max. daylight between platens: 3,800 mm - Mould height: 800 – 1,800 mm - Tie bar spacing (H x V): 2,000 x 1,600 mm - Platen size (H x V): 2,700 x 2,430 mm - Max. mould weight (moving/fixed platen): 2 x 41,330 kg - Max. total mould weight: 62,000 kg - Dry cycle stroke (Euromap 6): 1,400 mm - Dry cycle time (Euromap 6): 5.5 s Ejector Unit: - Ejector stroke: 400 mm Dodpjw Aw Tajfx Afloul - Ejector force: 385 kN Drive and Cooling: - Installed power, main drives: 265 kW - Oil tank capacity: 1,600 l - Max. oil cooling capacity (at 25°C): 43.2 kW - Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Robot fully integrated with the machine – operated via machine control panel The machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, home appliances, technical). Still under power, test run possible. IMMEDIATELY AVAILABLE If interested, please contact us – we can provide more photos, a video of the machine in operation, technical documentation, and arrange a convenient viewing date.

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 144.381 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, For sale is an injection moulding machine from Arburg, model 520 C 2000-675. Duedpfx Afju Uuaksljl Technical data: Year of manufacture: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW Transport and loading can be organised Europe-wide for an additional fee if required. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Duedpsg Emvhofx Aflol Screw diameter: 30 mm Shot weight: approx. 90 g

Stanje: kot nova (razstavni stroj), Demo unit with less than 20 operating hours // EXCELLENT CONDITION System: Optiv M 6.6.4 Multi-Sensor Coordinate Measuring Machine with Dual Z Technology Probes and Sensors: - 10x CNC motorized zoom with digital color camera and 12-segment LED ring light - HPsS-X1H scanning sensor with HH-A-T5 - HP-S-X1C/H probe holder (1xM3) - M3 stylus kit for HP-S-X1C sensor Duodpfx Afjncfd Rjlel - HR-X stylus rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - 25mm glass standard - 20mm setting ring Computer and Software: - PC-DMIS CAD++ measurement and evaluation software - BEST machine control unit - Dell 27" monitor - Work table Optional Accessories: - Chromatic white light sensor (CWS) - CWS probe head 3mm - Solara.MP12 - QS STAT 12 - O-QIS 12 Delivery, commissioning, and additional services available on request The measuring machine can be retrofitted to OptiCheck3D V 5.0 if desired.