Arburg 520C-220-675

ARBURG

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 9.171 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1,600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances operator comfort. Take advantage of this opportunity and purchase this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Advanced two-stage clamping program • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design • Sintered metal check ring • CrN coating on screw and backflow ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2 – servo-controlled dual-circuit pump system: • Two regulated hydraulic pumps enable precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control: • Touchscreen operation with process editor • 15-inch display (38.1 cm) • Multilingual user interface (German, English, local language) • Heating power zones 1–6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator Dsdpfx Ajyg I Ihoh Seki • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Operating hours: 9,171 Additional equipment • Not included in the listing • Note: The machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Stanje: rabljeno, Leto izdelave: 2011, Header with rapeseed equipment. Header year of manufacture 2022. Claas Vario 930 header. Dsdet Twuispfx Ah Soki

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 64.300 h, vpenjalna sila: 3.200 kN, premer vijaka: 60 mm, injekcijska masa: 723 g, skupna višina: 2.400 mm, skupna masa: 17.700 kg, This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60 mm and can process a maximum shot weight of 723 g. The machine supports a clamping force of 3,200 kN with a maximum opening stroke of 700 mm. Equipped with special features such as 2x AS core pull and 6x DS hot runner control points, the Arburg Allrounder Selecta 720 S 3200-2100 we offer for sale is ideal for robust performance in a production environment. Please contact us for further information. Additional Equipment • The Wittmann robot is not included • Conveyor belt is included, protective enclosure is only for electrical components • Other peripheral devices are not included. Machine Advantages Qualitative Advantages • Condition: used, pump overhauled Technical Advantages • Known issues: water computer and water batteries should be serviced (no impact on functionality) • Machine is offered without handling system and peripheral devices Djdpex D N Sbefx Ah Sjki Additional Information Machine still under power Dimensions Machine depth: 7,200 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 22.626 h, premer vijaka: 25 mm, Stroj Arburg 470 H 1000-170 je bil izdelan leta 2014. Gre za hidravlični stroj za brizganje plastike s zapiralno silo 100 t in premerom polža 25 mm. Obratuje na 400V 3∼, 50Hz s skupno priključno močjo 75 kW. Idealen za natančne injekcijske aplikacije. Za dodatne informacije o tem stroju nas kontaktirajte. • Na voljo: 2 podobni enoti • Obratovalna napetost: 400 V, 3-fazno, 50 Hz Dedpfx Ahsx D Rcue Soki • Krmilna napetost: 230 V, 50 Hz; 24 V AC • Nazivni tok motorja: 80 A • Nazivni tok grelnikov: 58 A • Skupni nazivni tok: 138 A • Skupna priključna moč: 75 kW • Leto kalibracije: 2027 • Na voljo tudi 1x enota iz leta 2011

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 83.000 h, vpenjalna sila: 350 kN, premer vijaka: 25 mm, For sale is an injection moulding machine from the manufacturer Arburg, model 320S 350-60. Year of manufacture: 2000 Operating hours (automatic mode): 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request and for an additional fee. Price incl. VAT Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet cost-effective metalworking machine for your production? Or are you interested in selling your own? For further information or contact options, please visit our website. Dsdpfxohhuq Aj Ah Sjki

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, vpenjalna sila: 1.600 kN, skupna masa: 5.900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine comes equipped with a take-out robot and an enclosure with a FilterFanUnit that ensures clean operation. It is ideal for precision plastic processing and offers a mold height of 250 mm and a platen spacing of 825 mm. Contact us for further information about this machine. Additional Equipment • Cooling water connection: Max. temperature: 30°C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Highlights: • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle, 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-driven with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Programmable, controlled nozzle contact pressure (1st injection unit) • Central 125 mm clamping platen set • Machine raised by 100 mm (elevated oscillation elements) Dksdpfex D E Dyjx Ah Sei • 8 programmable digital inputs and outputs • 6 electrical heating control circuits for the mold • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby function • Sound pressure level: 70 dB(A) | ±3 Additional Information Screw diameter: 400 units: 35 / 40 / 45 mm Injection pressure (max.): 400: 2500 / 2000 / 1580 bar Shot weight (max. g PS): 400: 141 / 184 / 232 g Heating capacity 400: 9.7 kW | 5 zones Net machine weight: 400: 5900 kg

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements driven by servo motors, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking for a high-quality injection moulding machine, you should consider the Arburg 420A 1000-400, which we are offering for sale. Please contact us for more information about this machine. • Drive technology: • Electromechanical main movements via servo drives: dosing, injection, mould opening/closing, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine mounting platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal injection unit 400 • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing unit D25 mm, highly wear-/corrosion-resistant; open nozzle (220/25), flat nozzle tip (300/00), heating band (320/00) (Pos 060/25) • Heating band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) Dksdsx D Hgvspfx Ah Sei • Servo-controlled, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mould height adjustment • Prepared for installation of a linear robot on the fixed platen • Tool protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blower unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, controlled and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, control cabinet, interfaces: • Selogica control system • Software packages (Pos 555: Advanced mechanical cycle control; Advanced movements; Production control; Optimization/operator assistance; Quality control; Documentation) • Temperature-controlled control cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mould temperature measurement zones (Pos 469/12) • Additional heating band for nozzle (Pos 468/01) • Interface for HB-Therm mould temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for colour dosing unit (Pos 493/00) Additional equipment • Programmable electric conveyor belt (Pos 412/02) • Sorting flap for separating good/reject parts (Pos 375/00)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Closing force: 25/35 tons Opening stroke: 200 mm Dksdpfouykh Dsx Ah Ssi Mould height: 150-300 mm Tie bar spacing: 221 mm Distance between mounting plates: 350-500 mm Mould mounting plates (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm³ Shot weight: 59 g Injection pressure: 1040 bar Operating hours: 34,748

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 54.526 h, premer vijaka: 35 mm, Arburg 520 H 1500-400 je bil izdelan leta 2013. Gre za hidravlični stroj za brizganje plastike s zapiralno silo 150 t in premerom polža 35 mm, ki deluje pri 400V 3~, 50Hz in ima skupno instalirano moč 89kW. Razmislite o nakupu tega hidravličnega stroja za brizganje plastike Arburg 520 H 1500-400. Kontaktirajte nas za dodatne informacije. • Obratovalna napetost: 400 V 3~, 50 Hz • Krmilna napetost: 230 V, 50 Hz; 24 V~ • Nazivni tok motor/grelec: 90/69 A • Skupni nazivni tok: ni navedeno • Skupna priključna moč: 89 kW Dodpfxjx D Rk Es Ah Sski

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 37.049 h, vpenjalna sila: 4.000 kN, skupna masa: 21.000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for high-precision plastic injection molding. Please contact us for further information on this machine. Clamping Unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / reinforced: 800 kN • Maximum opening stroke: 700 mm • Minimum mold height: 350 mm • Distance between platen faces (max.): 1050-1550 mm • Clear tie bar spacing: 820 × 820 mm • Mounting platen dimensions (W × H): 1171 × 1171 mm • Maximum mold half weight: 4500 kg • Maximum ejection force: 100 kN • Maximum ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: – 4000-2100: 88.9 kW – 4000-3200: 96.2 kW • Color: Plastic-coated frame (light gray / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Power supply of injection unit: 1 × 16 A Injection Unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Backpressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 Dedpoydpvbsfx Ah Seki • Installed nozzle heater: 1000 W | 1250 W Dimensions and Weights (Base Machine) • Clearance length: 490 mm • Electrical connection (fuse) motor + heater: 250 A • Electrical connection (fuse) motor: 125 A • Electrical connection (fuse) heater: 50 / 63 A Additional Equipment • SEPRO SR AXESS 30 S3 Robot (2008)

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), INJECTION MOLDING MACHINE KRAUSS-MAFFEI 150-700 C1 Year: 1999 Dedpfoh S Dncsx Ah Sjki Screw diameter: 55 mm In excellent condition, still in operation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 68.463 h, premer vijaka: 35 mm, Ta stroj Arburg 470 E 1000-700 je bil izdelan leta 2011. Gre za robusten električni brizgalni stroj z zapiralno silo 100 ton in premerom polža 25 mm. Deluje na 400V 3~, 50Hz s skupno priključno močjo 78 kW in je zasnovan za učinkovito delovanje. Izkoristite priložnost za nakup tega električnega brizgalnega stroja Arburg 470 E 1000-700. Za dodatne informacije nas kontaktirajte. Dksdpfxjx D Rndo Ah Sei • Obratovalna napetost: 400 V, 3-fazno, 50 Hz • Krmilna napetost: 230 V, 50 Hz; 24 V AC • Nazivni tok motorja: 61 A • Nazivni tok ogrevanja: 58 A • Skupni nazivni tok: 119 A • Skupna priključna moč: 78 kW • Kalibracija (leto): 2027

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 58 h, Splošni podatki Mere širina: 4360 mm Mere globina: 1718 mm Mere višina: 3910 mm Teža stroja: 7600 kg Vbrizgalna enota Premer polža: 35 mm Tlak vbrizgavanja: 2500 bar Zatezna enota Zatezna sila: 1000 kN Ta stroj za brizganje Arburg ALLROUNDER 1200 t 1000 - 400 je bil izdelan leta 2018 v Nemčiji. Ima 58 delovnih ur. Stroj ima zatezno silo 1000 kN, je kot nov, rabljen samo za testiranje. Stroj mora kupec pridobiti CE certifikat, več ponudb imamo od tretje osebe, najnižja od 2.000 €. Vrsta uporabe Dedpfxex D Nc Hs Ah Sski Brizganje plastike

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 10.000 h, Intended use: Construction Contact Theo Lelie for further information. Dsdpfx Ajx Dmugoh Sski

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 13.361 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This Arburg 520S-1500-400 injection moulding machine was manufactured in 2016. It features a clamping force of 1600 kN, a 45 mm screw diameter, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances user-friendliness. Take advantage of this opportunity and purchase the hydraulic Arburg 520S-1500-400 injection moulding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced clamping program with 2 stages • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology Level 2: servo-controlled dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circuit with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating power zones 1-6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) Dodjyg I Egjpfx Ah Seki • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Additional equipment • None included in the list • Robot/automation ready: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robotic system