Hidravlični stroj za brizganje

Arburg ALLROUNDER 1200 t 1000 - 400

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type TR450 Nwjdpfxjfbt Sio Adysb The spray-rotation cleaning system type TR450 is an automated cleaning and degreasing unit featuring a lid that opens easily upwards. The system is designed for cleaning single parts and/or bulk materials in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on a slight tumbling motion of the parts within the basket when cleaning bulk material; the fill level in the basket must be observed accordingly. Additionally, the unit is equipped with a flood tray beneath the goods basket, allowing for immersion rinsing of the parts, thereby achieving an even better cleaning result. Including the following features: • Fully made of stainless steel 1.4301, inside and outside • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (power: 11.6 kW) • Steam vapor extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, with height-adjustable locking lid Connected load: approx. 20 kW (32 amp plug)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Arburg 1200 T 2000-800 Clamping force: 200 tons Maximum opening force kN/mm: 115/500 Screw diameter: 45 mm Shot volume: 318 cm³ Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T-model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastic cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for wedge-type coupling geometry 5. Control system: SELOGICA 'direct' control 6. Technology level: Level 2 servo-driven with 2 regulated pumps 7. Rotary table: Advanced ergonomic special version, 2-stage 180° forward/reverse alternating Nodpfx Aewugczsdyswb 8. Nozzles: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric &

Stanje: dober (rabljeno), Leto izdelave: 2006, vpenjalna sila: 800 kN, Totale aangesloten belasting: 21,7 kW Pompmotor: 18,50 kW Gewicht: 7.400 kg Nedpfx Adsvu Dncsyowb

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Clamping force: 2000 kN, screw diameter: 40 mm, nozzle diameter: 2.5 mm, effective screw length: 20 mm, maximum shot volume: 201 cm³, maximum shot weight (PS): 184 g. Hours in automatic operation: 20,700 h, pump hours: 27,800 h, cycles: 3.4 million. Documentation available. An on-site inspection is possible. Nwsdpfx Ajr N Rh Hedyjb

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 13.879 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.200 kN, premer vijaka: 30 mm, The machine is in good condition and features a 3-position rotary table (3x120°). Year of manufacture: 2016 Nwedpfx Aownfw Djdysb Pump operating hours: 17,263 Production operating hours: 13,879 Location: Southern Germany Contrary to the specification, the light curtain is not installed, as we operated the system with enclosed automation (see photos). However, the light curtain components are present and will be included in the sale. The part-specific automation and the feed hopper shown in the photo are not included in the sale. It is technically possible to convert the unit to a 2-position rotary table (2x180°). This conversion could be commissioned directly with Arburg by the buyer after purchase. Ex works sale.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, INJECTION MOULDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical specifications Clamping unit: - Clamping force: 1,000 kN – ensures high process stability - Rotary table diameter: 1,300 mm – optimizes the production cycle - Usable mould mounting surface: 800 × 590 mm - Minimum mould height: 300 mm - Maximum daylight between platens: 585 mm Injection unit (3 exchangeable cylinders): - Cylinder Ø 30 mm: 83 cm³ at 2,200 bar - Cylinder Ø 40 mm: 140 cm³ at 1,250 bar - Cylinder Ø 20 mm: 36 cm³ at 2,500 bar Additional equipment: - 2 hydraulic core pulls – for handling complex mould designs - 2 pneumatic valves – for additional mould functions - GK control – possible to operate 3 heating zones directly from the machine - SELOGICA DIRECT control system – precise process control, custom sequence programming possible Year of manufacture: 08/2023 Pump operating hours: 1,062 h Detailed description The machine is equipped with a hydraulic system featuring two energy-saving variable delivery pumps and a servo valve, ensuring precise control of pressure and movements. The hydraulic unit is mounted outside the injection moulding machine’s frame, significantly reducing operational noise levels. Thanks to highly efficient filters and low oil volume, the oil change interval has been extended to 20,000 hours. T2 technology with servo control includes: - two variable delivery pumps - programmable, adjustable, and stabilized clamping force - programmable and manually adjustable nozzle contact force - capability for parallel movements (nozzle, ejector, core pulls) Nsdjxzklqjpfx Adyewb The machine also features: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of the main drive operation, reducing energy consumption by smoothly adjusting the pump speed according to machine load (for motors 15–75 kW, 380–480V, 50–60 Hz) Required option: 525/02 – adjustable machine cooling circuits The platen plates are equipped with a central injection position and a centering hole Ø 125 mm.