Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562)
Arburg 1200 T 2000-800

Name: Arburg 1200 T 2000-800
Brand: Arburg
Availability: InStock

Leto izdelave

2019

Stanje

Rabljeno

Lokacija

Trenčianske Stankovce Slovaška

Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562) Arburg 1200 T 2000-800

Osnovni podatki

Oznaka stroja:: Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562)

Proizvajalec:: Arburg

Model:: 1200 T 2000-800

Leto izdelave:: 2019

Stanje:: skoraj kot novo (rabljeno)

Cena in lokacija

Lokacija prodajalca:: 3011 Sedličná, 913 11 Trenčianske Stankovce, Slovaška

Pokliči

Podrobnosti ponudbe

ID oglasa:: A19403861

Referenčna številka:: 250175

Posodobitev:: nazadnje dne 30.04.2026

Opis

Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm)

Clamping unit 2000T

Table diameter: 1200mm

Angle rotation: 180 degrees

Clamping force: 200 tons

Opening force max. kN/mm: 115/500

Platen daylight max. : 600 mm

Injection unit

Screw diameter: 45 mm

Shot volume: 318 cm3
Bwedowugczspfx Am Eow

Shot weight: 291 g

Injection pressure: 2470 bar

1. Model: T model
2. Machine type: 1200 T 2000 - 800
3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant
4. Screw: Reinforced screw coupling for splined coupling geometry
5. Control system: SELOGICA ‘direct’ controller
6. Technology stage: Stage 2 servo-regulated with 2 control pumps
7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating
8. Nozzle: Open nozzle 45 mm with nozzle tip
9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2
10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating
11. Clamping platen: Mould mounting platen set, central diameter 125 mm
12. Blow unit: Mould blow unit with pressure reducer at station 1
13. Safety: Optical barrier at loading station, continuous oil cooling and filtration
14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper
15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1)
16. Electric axes: Basic equipment for electric axes control
17. I/O: 4 programmable inputs/outputs on terminal rail
18. Sockets: Additional socket combination (1 CEE, 1 Schuko)
19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation
20. Acoustic alarm: Error alarm acoustic signal
21. Safety interlock: Interface for safety interlock of door (EUROMAP 73)
22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold
23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter
24. Manual & labels: CD operating manual & spare parts list, Slovak language labels
25. Machine feet: Anti-vibration footplates
26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme
27. Display languages: IT/EN/SK

Dokumenti

19403861-01.pdf

Ponudnik

Registriran od: 2018

182 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+421 32/3... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Stroj za brizganje Arburg ALLROUNDER CENTEX 320C 500-250 VO

Deutschland

650 km

Stroj za brizganje
ArburgALLROUNDER CENTEX 320C 500-250 VO

Pokliči

Mali oglas

Stroj za brizganje Allrounder 520 C 2000 Arburg Allrounder 520 C 2000-675

Weil der Stadt

545 km

Stroj za brizganje Allrounder 520 C 2000
ArburgAllrounder 520 C 2000-675

8.199 €

EXW Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 95.239 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 173937, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, minimalna višina orodja: 250 mm, skupna dolžina: 5.100 mm, skupna širina: 1.800 mm, skupna višina: 2.200 mm, skupna masa: 6.630 kg, Oprema: dokumentacija / priročnik, The machine operated flawlessly until the last day before the arrival of the new machine. It is therefore in good used condition. The machine is being sold due to lack of space in the injection area and is no longer connected to power. Pump, injection unit, and clamping unit are leak-free. The machine manual is available. Videos of the machine are available. Operating hours (pump): 95,239 Operating hours (automatic): 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/back Bsdov D Nxlepfx Am Ejww - 02/2023: New keypad installed (motor and heating panel) - 12/2022: Ejector and injection unit sealed, including new piston

Poglej podrobnosti

Mali oglas

3D tiskalnik OR Laser Orlas Creator 3D-Metall Drucker

Emmelshausen

709 km

3D tiskalnik
OR LaserOrlas Creator 3D-Metall Drucker

Pokliči

Stanje: rabljeno, Leto izdelave: 2018, 3D printer Bjdpfx Asvtftqjm Ejww Laser type / power: Yb fiber laser / 250 W Wavelength: 1070 nm Lens: F-theta precision lens Build volume: Ø 100 mm x 100 mm Reservoir volume: Ø 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 – 100 μm Scan speed: Jog 20 m/s, Operation 6 m/s Spot size: min. 40 μm Chamber opening: 450 x 180 mm

Poglej podrobnosti

Mali oglas

CNC 5-osni obdelovalni center HMC, rezkalni center, obdelovalni center s krmiljenjem CNC SIEMENS 840 LICON Liflex 1266 PC B1

Hessisch Lichtenau

682 km

CNC 5-osni obdelovalni center HMC, rezkalni center, obdelovalni center s krmiljenjem CNC SIEMENS 840
LICONLiflex 1266 PC B1

165.000 €

Fiksna cena plus DDV

Pokliči

Stanje: rabljeno, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Bedpst Ac Efjfx Am Eeww Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL CNC Path Control (Solution Line) with 5 simultaneously controlled axes Travel distances: X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as a swiveling bridge +/- 135° (270° total) B-axis 360° infinite rotation Axis acceleration X + Y axis: 6 m/s² Axis acceleration Z axis: 9 m/s² Feed force X + Y axis: 7500 N Feed force Z axis: 10,000 N Positioning tolerance (X/Y/Z): 0.008 mm Swivel speeds A-axis: 180° rotation in 4 sec. Interference circle diameter in swing bridge: max. 1400 mm Transport load in swing bridge: max. 700 kg Tool holder: HSK 63 Spindle speed: max. 12,000 rpm, stepless Spindle power: 37 kW at 40% duty cycle Spindle torque at 40% duty cycle: 85 Nm Max. spindle torque: 100 Nm Tool change time (chip to chip): approx. 3.7 sec. Tool diameter with adjacent slots occupied: Ø 140 mm Tool diameter with adjacent slots empty: Ø 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Power supply: 400 Volt, 50 Hz Connected load: 80 kVA Compressed air connection: 5–8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (power 37 kW/40% duty cycle) with liquid cooling and recooling unit - LICON 2-axis rotary tilting table as B and C axis, with hydraulic axis clamping - Zero-point clamping system on the rotary table of the tilting axis - Double pallet changer, without pallets (must be procured separately) - Media transfer for 5 single-acting pressure lines for oil or air for workpiece clamping on pallets. Hydraulic functions range from 30–150 bar, pressure monitoring (controllable via M functions) - Tool changer with 30 positions, disc-type turret - Machine configured for dry machining with MMS minimum quantity lubrication system - MMS-IKZ, internal MMS lubrication supply through spindle - Drag-chain chip conveyor, discharge height 1150 mm - Licon ECO Mode (energy efficient operation) - Direct path measuring system in all axes - Recorded operating hours with control voltage on: approx. 7,500 h Operating space required (L x W x H): 9000 x 5000 x 3800 mm Transport space required (L x W x H): 6100 x 4400 x 3600 mm Weight of base machine: approx. 21 t Total weight: approx. 24 t Very good condition

Poglej podrobnosti

Mali oglas

Arburg 570 S 2200-800/290 Arburg 570 S 2200-800/290

Romunija

653 km

Arburg 570 S 2200-800/290
Arburg570 S 2200-800/290

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, vpenjalna sila: 2.200 kN, premer vijaka: 70 mm, injekcijska masa: 172 g, Ta Arburg 570 S 2200-800/290 je bila izdelana leta 2020. Opremljena je s hidravličnim pogonskim sistemom in Selogica krmiljenjem za natančno delovanje. S zapiralno silo 2.200 kN in premerom polža 40 mm je idealna za natančne brizgalne naloge. Izkoristite priložnost in kupite to hidravlično brizgalno maso Arburg 570 S 2200-800/290. Kontaktirajte nas za dodatne informacije. Zapiralna enota Bwsdpfox Nkp Iex Am Ejw • Razdalja med vodili: 570 × 570 mm • Hod odpiranja: 650 mm • Izmetalna sila: 70 kN • Izmetalni hod: 200 mm Brizgalna enota • Velikost brizgalne enote: 290 • Tlak brizganja: 2.500 bar • Volumen brizga: 188 cm³ Pogon in krmiljenje • Pogon: Hidravlični • Krmiljenje: ARBURG Selogica

Poglej podrobnosti

Mali oglas

Stroj za brizganje Arburg Allrounder 470S 1300-350

Cantabria

1.511 km

Stroj za brizganje
ArburgAllrounder 470S 1300-350

Pokliči

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Arburg injection molding machine from 2000. 130 tons clamping force. The machine is delivered fully reconditioned at our facility in Heras (Cantabria). New seals installed in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660 x 840 mm OPENING STROKE: 575 mm MAXIMUM DISTANCE BETWEEN PLATENS: 800/850 mm Bwsdpfx Amerxtpdo Ejw DISTANCE BETWEEN TIE BARS: 420 x 420 / 470 x 470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ INJECTION SHOT WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar

Poglej podrobnosti

Mali oglas

Vakuumska črpalka Busch PANDA WV 2400 A + COBRA NC 0630 C

Forst (Lausitz)

620 km

Vakuumska črpalka
BuschPANDA WV 2400 A + COBRA NC 0630 C

Pokliči

Mali oglas

Nemčija

614 km

Radialna žaga
ELURAS 1253

Pokliči

Stanje: rabljeno, Leto izdelave: 1993, Technical details: Saw blade diameter: 250 mm Saw blade bore: 30 mm Cutting depth: 68 mm Cutting length: 450 mm Total power requirement: 2.55 kW Machine weight approx.: 150 kg Dimensions (L x W x H): 0.85 x 0.86 x 1.4 m This circular saw is manually operated and equipped with a worktable 400 x 860 x 22 mm, adjustable, mounted on a frame. Application: Wood, duroplastics, gypsum, chipboard, and other similar materials. Specifications of the pivoting arm: Length 800 mm, max. outreach 580 mm, swivels 45° to the right/left, with display via radial scale. Bwodpfou Nifyjx Am Ejw Specifications of the saw carriage: Manual feed (hand lever), tiltable 90° to the left, with display via radial scale, motor 380V at 2,700 rpm, degree of protection IP44.

Poglej podrobnosti

Mali oglas

Radviliškis

1.229 km

LSAM ekstruder
CEADS25 Extruder

Pokliči

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EX-006-S25, Leto izdelave: 2022, obratovalne ure: 20 h, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 32 A, priključek za stisnjen zrak: 10 letvica, vhodna frekvenca: 60 Hz, moč: 9 kW (12,24 KM), Ponujamo nov CEAD S25 LSAM ekstruder, letnik izdelave 2022. Model: S25 Extruder Serijska številka: EX-006-S25 Vhodne faze: 3 faze Bedpfxsy Nk S Ne Am Esww Vhodna napetost: 400 V Vhodna frekvenca: 50-60 Hz Vhodni tok: 32 A Moč: 9 kW Nazivni kratkostični tok: 10 kA Tlak zraka: 6-10 bar Tlak zraka: 87-145 psi Priporočen RCD: 30 mW Vključena sta sušilec za pelete in podajalnik. Priloženo skoraj 2 toni peletov Airtech Dahltram® C-250CF + čistilna zmes. Za dodatna vprašanja ali informacije nam pošljite sporočilo ali nas pokličite.

Poglej podrobnosti

Mali oglas

DN SOLUTIONS LYNX 2100LMSA DN SOLUTIONS LYNX 2100LMSA

Madžarska

653 km

DN SOLUTIONS LYNX 2100LMSA
DN SOLUTIONSLYNX 2100LMSA

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 205 mm, pomik po osi Z: 560 mm, moč vretenovega motorja: 15.000 W, skupna višina: 1.693 mm, skupna širina: 1.595 mm, skupna masa: 3.600 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i PLUS, največja dolžina izdelka: 2.805 mm, število osi: 3, This 3-axis DN Solutions LYNX 2100LMSA was manufactured in 2022. It offers a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine features a 6-inch chuck, a 12/24-position turret, and a sub-spindle for enhanced capabilities. If you are looking for a high-quality CNC lathe, consider the DN Solutions LYNX 2100LMSA horizontal turning center we have for sale. Please contact us for further details. • Condition: New, 0 operating hours • CNC control: FANUC 0i PLUS with 15" touchscreen Capacity: • Chuck size: 6 inches • Max. turning diameter: 300 mm • Max. turning length: 510 mm Axes / Travels • X-axis rapid traverse: 30 m/min • Z-axis rapid traverse: 36 m/min • Number of linear axes: 2 (X / Z) • C-axis: Spindle positioning for milling and drilling operations Main Spindle • Max. spindle torque: 127 Nm Sub-Spindle: • Sub-spindle: Yes • Max. sub-spindle speed: 6,000 rpm Turret: • Turret stations: 12 / 24 • Rotating tool speed: 6,000 rpm Integrated options • Automatic tool changer • High-pressure coolant system: 7 bar Bwsdpjy Ex A Uefx Am Eow Additional equipment • Chip conveyor • Robot interface • Automatic door • Parts catcher with conveyor belt Technical Specification Counter Spindle Yes Driven Tools Yes

Poglej podrobnosti

Oglašujte tukaj