Ekscentrična stiskalnica 100 ton - okvir C

Fresan FP 100P Eccentric Press

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, laserska moč: 3.000 W, moč: 3.000 kW (4.078,86 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta hlajenja: voda, skupna dolžina: 6.000 mm, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, NS-6022HG Tube-Laserschneidmaschine 3kW 3-Backen-Profirohrlaserschneidmaschine mit automatischem Ladesystem mit 6 m automatischer Entladung mit chinesischem 3D-Fasenkopf-BLT tauglich für Rohre T CE-Antistrahlungsglas Schutzabdeckungen AVR Düsen- und Linsenset etc. (jeweils SPCS) Serie: NS-HG Typ: Drei-Backen Lhodpfx Ahowu Rm Reuoh Nutenfunktion: Standard Leistung: 3 kW Maximale Rohrlänge: 7000 mm Rundrohr: Ø15 mm–Ø220 mm Quadratrohr: 15 mm x 15 mm–150 mm x 150 mm Rechteckrohr: 30 x 20 mm–160 x 80 mm Oval-/Flachovalrohr: Kurze Achse ≥ 15 mm, lange Achse ≤ 210 mm U-Profil: max. 20# I-Träger: max. 18# H-Profil: max. 175 x 90 mm Maximale Beschleunigung: 1,0 G Maximale Spannfutterschwindigkeit: 100 U/min Maschinengewicht: 10 t Stromversorgung: 380 V AC, 50 Hz Standard: Unterstützt Servo (Nut), Staubschutz (Y-Achse), Staubschutz (X-Achse), Staubschutz (Z-Achse), Sicherheitszaun (Lichtvorhang), Null-Reststück, Staubabsaugung im Schneidbereich, Staubabsaugung an der hinteren Spannvorrichtung

Stanje: pripravljen za uporabo (rabljen), Erfurt PKZe 500/1000 trimming press Pressing force: 500 t Table dimensions: 1020 x 1420 mm Lhedpfx Ahevbcxtjush Stroke: 400 mm Strokes per minute: 12 Main motor power: 41 kW Video available

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Lhodpfx Ajcubatehush Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: rabljeno, Leto izdelave: 1990, I-beam, flat: 140 x 140 x 13 mm I-beam, upright: 120 x 120 x 13 mm Angle steel: 130 x 130 x 12 mm Round steel: 85 mm Bending capacity – flat bar: 125 x 25 mm Flat bar on edge: 65 x 65 mm Including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203 mm Lodpfxstt Ecdo Ahuehh 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32 / 32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Lhjdeilg Hdepfx Ahush Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Stanje: novo, Leto izdelave: 2026, Construction size: 6 Nominal heat output: 170 kW -- Complies with BImSchV Stage 2 and CE -- Combustion chamber fully lined with fireclay Suitable for rooms: 4,800 m³ (according to DIN) Fuel: Firewood, chipboard, wood chips, briquetted wood shavings Fuel consumption: 40 - 50 kg/h Fan air output, free blowing: 14,000 m³/h Discharge opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 2,150 kg Lhjdedlhdbspfx Ahueh PLC control cabinet: 380 Volt

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ Lhjdpfxjvz Hq Hs Ahueh - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Load capacity 500 kg Number of suction cups: 6 Diameter of suction cups: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing structure made of steel, painted in RAL 2000 with low dead weight. Consisting of: - 1x Galvanized longitudinal beam, length 2,400 mm - 3x Galvanized crossbeams, each 1,000 mm in length - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the sealing ring can be replaced separately from its metal carrier, cost-effectively and without tools - 6x Ball valves for individually shutting off each suction cup, enabling smaller formats to be lifted without moving the suction cups or beams - 1x Spiral connection cable, small coil: * extendable to 3,500 mm, version as extension cable with CEE plug and coupling * routed next to the load chain to the hoisting device Lodpfxeq Sc Aus Ahuohh - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Extendable operator handle to 1,000 mm from beam center. Sturdy metal pouch for your crane control included at no extra charge. - Operation "Suction / Release" via manual slide valve: Wear-free and highly robust manual slide valve for safe suction and release after pressing the release button (double-action release according to EN 13155) - Control and safety unit for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indication * Large vacuum reservoir with safety non-return valve * Double-action operation for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easily understandable documentation - Warranty on material and manufacturing defects: one year in single-shift operation (excluding wear parts) Initial inspection according to UVV 18, VBG 9a with CE declaration of conformity according to EN 13155 - Packaging suitable for truck transport.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Ljdohy Tp Djpfx Ahuohh Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Lhodpfx Ahefx Hv Houeh Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.