Terenski žerjav

Terex RT 100

Stanje: rabljeno, New diesel generator set, power generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 New, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby power: 55 kVA / 44 kW Rated current: 33 amps Voltage: 400/230 volts, 50 Hz    230 volts, 50 Hz Fuel tank capacity: 99 liters – provides an operating time of up to 8.5 hours at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby: approx. 4 liters/hour Drive engine: 4-cylinder inline diesel engine RICARDO ZH4105ZD Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple, compact construction with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) - 1x CEE 16 amp socket (5-pin, 400 V) Kedsxlkq Uepfx Af Tedg - Terminals for cable power connection for external consumers, e.g. site distribution boxes - ATS module for mains backup operation, enabling automatic emergency power switchover in the event of mains failure Space requirement (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg Brand new machine from stock

Leto izdelave: 2023, Stanje: novo, On-site nitrogen generation system for the production of a wide range of purities, pressures, and flow rates. The system is composed of high-quality components such as filters and adsorbers, a nitrogen separation unit from Parker Hannifin, and compressors from Kaeser. If high-pressure compression is required, we cooperate with Bauer Kompressoren. Over 400 such systems have been installed for our customers. Kdjdponq Di Tsfx Af Tjg All systems are custom-assembled and adapted by us to your spatial requirements and operational needs. We also design and implement containerized systems for both indoor and outdoor installation. We look forward to your inquiries...

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, Lifting capacity: 4,500 kg Overall height: 2,705 mm Lift height: 5,675 mm Mast type: Triplex Kdedjwvtf Sepfx Af Tjg Fork length: 2,400 mm Drive type: Electric Including fork positioner Including sideshift UVV inspection and maintenance newly performed

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition Ksdpfxeh Ayyqj Af Tjdg The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL DATA: Injection Unit: - Screw diameter: 135 mm - Screw stroke: 610 mm - Injection volume: 8,731 cm³ - Shot weight (PS): 7,860 g - Screw speed: 125 rpm - Screw torque: 14,000 Nm - Max. screw torque (at reduced speed): 15,630 Nm - Plasticising rate (3-zone screw): 222.9 g/s - Plasticising rate (barrier screw): 279.2 g/s - Injection rate: 1,904 cm³/s - Plasticising pressure: 1,648 bar - Max. injection pressure: 2,000 bar Ksdpfx Afow Aw Tao Tsdg - Nozzle stroke: 1,100 mm - Nozzle contact force: 210 kN - Material cylinder: L/D = 25 - Number of heating zones (incl. nozzle): 8 - Heating power: 88.5 kW Clamping Unit: - Clamping force: 20,000 kN - Minimum clamping force: 2,000 kN - Opening force with cushion: 1,600 kN - Opening stroke: 3,000 mm - Max. daylight between platens: 3,800 mm - Mould height: 800 – 1,800 mm - Tie bar spacing (H x V): 2,000 x 1,600 mm - Platen size (H x V): 2,700 x 2,430 mm - Max. mould weight (moving/fixed platen): 2 x 41,330 kg - Max. total mould weight: 62,000 kg - Dry cycle stroke (Euromap 6): 1,400 mm - Dry cycle time (Euromap 6): 5.5 s Ejector Unit: - Ejector stroke: 400 mm - Ejector force: 385 kN Drive and Cooling: - Installed power, main drives: 265 kW - Oil tank capacity: 1,600 l - Max. oil cooling capacity (at 25°C): 43.2 kW - Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Robot fully integrated with the machine – operated via machine control panel The machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, home appliances, technical). Still under power, test run possible. IMMEDIATELY AVAILABLE If interested, please contact us – we can provide more photos, a video of the machine in operation, technical documentation, and arrange a convenient viewing date.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 tons Screw diameter: 40 mm Kedod Tnbhspfx Af Tsdg Operating hours: 77,890 h Tie bar distance: 420 x 420 mm

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 144.381 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, For sale is an injection moulding machine from Arburg, model 520 C 2000-675. Technical data: Ksdpfeu Uuakox Af Todg Year of manufacture: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW Transport and loading can be organised Europe-wide for an additional fee if required. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, diameter various quantity 56x Kodowtrzyopfx Af Todg mounting BT 40

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Kedjg Emvhjpfx Af Tjdg Year of manufacture: 1997 Screw diameter: 30 mm Shot weight: approx. 90 g

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Arburg 520C-220-675 Schließkraft: 220 Tonnen Schnecke: 35 mm Baujahr: 1997 Holmenabstand: 520 x 520 mm Kdedpfof S A R Ajx Af Tog