Terenski viličar 5T 4x4 CE

5T CE

Stanje: dober (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 4.230 mm, pomik osi Y: 1.950 mm, pomik po osi Z: 750 mm, dolžina mize: 4.000 mm, širina mize: 1.250 mm, obremenitev mize: 11.000 kg, CNC Gantry Milling Machine KAO MING - KMC 4000 SV-H Double linear guide and flat guideway design Automatic head changer for multi-sided machining of large components Automatic tool changer for horizontal and vertical milling heads, swiveling Distance spindle nose to table: 213–1093 mm Distance spindle center to table: 130–… mm Horizontal head indexing: 5° x 72 positions Heidenhain iTNC530 with HR410 handwheel Spindle torque: 1018 Nm, ISO 50 Universal milling head, Huron type X-axis travel: 4230 mm Y-axis travel: 1950 mm Z-axis travel: 750 mm Distance between columns: 1500 mm Table length: 4000 mm Table width: 1250 mm Table load capacity: 11,000 kg X-axis feed rate: 12,000 mm/min Y-axis feed rate: 15,000 mm/min Z-axis feed rate: 12,000 mm/min Tool holder: 50 ISO/BT/MK Spindle power: 26 kW Spindle speed: 4,400 rpm Tool changer: 30 positions Chip conveyor: Yes Ncodpfx Alexf E Twotew Coolant system: Yes Length: 10,100 mm Width: 4,500 mm Height: 4,250 mm Weight: 30,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is presented in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute any representation or contractual terms. We recommend you verify all critical details.

Stanje: dober (rabljeno), Leto izdelave: 2003, obratovalne ure: 106.864 h, vpenjalna sila: 1.300 kN, premer vijaka: 35 mm, The machine has been very well maintained, with service and maintenance always carried out on time. Good condition, fully functional Still in operation until week 11 Additional service reports and documents available Technical Specifications: Year of manufacture: 2003 Automatic operation: 106,864 hours Clamping force: 1,300 kN Screw diameter: 35 mm Screw stroke: 180 mm Injection force: 50 kN Opening stroke: 500 mm Distance between tie bars: 750 mm Ejector force: 40 kN Advance Package - VE561/20 LGS Position-controlled screw with control valve at the injection unit for particularly high dynamics and reproducibility of the injection process. The back pressure is regulated, and the nozzle contact force is manually adjustable. - VE 557/00 AES Energy-saving system for automatic power optimization, enabling corresponding energy savings by continuously adjusting the pump drive speed to the power requirements of each injection cycle. - VE 460/00 ED Electromechanical dosing drive via a speed-controlled three-phase asynchronous motor. This improves productivity through simultaneous movements, gentler material preparation, and further energy savings compared to hydraulic dosing. On request and at an additional charge, loading and transport (Europe-wide) can be organized. Prices plus VAT Inspection by appointment possible. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Ncsdpfxjrp Dyrs Altew Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For additional information or to get in touch, please visit our website.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 230 h, SANY SY155W je mobilni bager/buldožer namenjen za visoku, nisku i duboku gradnju. On nije samo mašina za rušenje, već i svestrana terenska i gradska mašina koja, uz odgovarajuće priključke (npr. hidraulični čekić, drobilica), može da obavlja različite zadatke. Pogon: DEUTZ TCD4.1 / Isuzu dizel motor, emisioni standard V, snaga oko 115–120 kW. Ncodpfxoy It Tme Altjw Sistem goriva i hidraulike omogučavaju efikasan i ekonomičan rad. Ukupna težina oko 13,5–15 t. Standardni kapacitet kašike: oko 0,6 m³. Točkaška konstrukcija – jednostavan transport i brza promena lokacije. Hidraulika i radne funkcije: Sistem brze izmene za upotrebu različitih priključaka kao što su hidraulični čekići, drobilice, grejderi i drugi alati. Snažna funkcija kopanja i dizanja – pogodno za iskop, utovar, drobljenje i rušenje sa odgovarajućim priključcima.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 67 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, skupna masa: 5.900 kg, proizvajalec krmilnikov: ARBURG, model krmilnika: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine is equipped with a take-out robot and an enclosure with a FilterFanUnit, ensuring clean operation. It is ideal for precision plastics processing and offers a mold height of 250 mm and a tie-bar distance of 825 mm. Contact us for more information about this machine. Additional Equipment Nodpsx D E Dysfx Altocw • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Advantages Technical Advantages of the Machine • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 variable displacement pumps • Ejector pressure P/Q-controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Center clamping plate set, 125 mm • Machine raised by 100 mm (heightened vibration elements) • 8 programmable digital I/Os • 6 electrical heating zones for the mold • 1 additional heating circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switch • Sound pressure level: 70 dB(A) | ± 3 Additional Information • Screw diameter: 45 mm • Injection pressure (max.): 1580 bar • Shot weight (max. g PS): 232 g • Heating capacity: 9.7 kW | 5 zones • Net machine weight: 5900 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 50 h, nosilnost: 8.000 kg, dvižna višina: 4.800 mm, prosto dvigovanje: 1.570 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.780 mm, moč: 59 kW (80,22 KM), širina nosilnega okvirja vilic: 2.240 mm, dolžina vilic: 2.400 mm, lastna masa: 12.406 kg, vrsta pogona: Diesel, Dieselski viličar Težišče nosilnosti: 600 Širina vilic: 180 mm Debelina vilic: 75 mm ISO razred: Terminal West Tip droga: Triplex Menjalnik: Hidravlični pretvornik Hitrostni razred: 20 Stanje: Nov stroj Tehnično stanje: Novo Tip pnevmatik spredaj: Superelastične Stanje sprednjih pnevmatik: Nove Tip pnevmatik zadaj: Superelastične Stanje zadnjih pnevmatik: Nove Bočni pomik, nastavljive vilice, 3. ventil, 4. ventil, delovna luč zadaj, delovna luč spredaj, ogrevanje, popolna kabina, polni prosti dvig, CE certifikat, notranje ogledalo, zunanje ogledalo, rotacijska luč, sedež, sprednja in zadnja kamera. Ncjdpfx Aexr R Efjltew

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.150 mm, pomik osi Y: 1.850 mm, pomik po osi Z: 1.000 mm, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 24 m/min, največja hitrost vretena: 24.000 obr/min, vrtilni moment: 87 Nm, CNC Fidia C20 WORKING AREA X-axis longitudinal travel: 3,150 mm Y-axis transverse travel: 1,850 mm Z-axis vertical travel: 1,000 mm MAXIMUM AXIS SPEED X and Y axes rapid traverse: 30 m/min Z axis rapid traverse: 24 m/min WORKPIECE TABLE Clamping surface: 3,000 x 1,600 mm Maximum permissible load: 5,000 kg/m² T-slots: - 8 longitudinal H12 + 1 H8 - Width: 22 mm - Pitch: 160 mm ELECTROSPINDLE: Maximum power (S6 60%): 55 kW Spindle speed range: 240 ÷ 24,000 rpm Constant power range: 6,000 ÷ 24,000 rpm Maximum torque: 87.5 Nm Tool holder: HSK – A63 C-axis stroke: ± 200° C-axis speed: 2,000 °/min C-axis offset from spindle axis: 75 mm A-axis stroke: +95° / -110° A-axis speed: 2,000 °/min Max. distance spindle nose – table surface: 1,175 mm Machine equipped with: Ncodpfx Alsyw Tddotsw • 24-position tool magazine • Remote electronic handwheel • HMS head calibration system • Various auxiliary equipment supplied with the machine • Operation and maintenance manual and CE declaration of conformity

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Na voljo je skoraj nova brizgalna naprava Arburg. Zapiralna sila: 1600kN, razdalja med stebri: 520mm, zapiralni hod: 364mm, izmetalni hod: 150mm, izmetalna sila: 40kN, brizgalna enota: 400, brizgalni tlak: 2500bar. Dimenzije stroja D/Š/V: ca. 6000mm/1800mm/2200mm, teža: ca. 6000kg, krmiljenje: Selogica, delovne ure: ca. 67h. Vključno z zaščitnim ohišjem s čistim zrakom FilterFanUnit in odjemnim robotom. Dokumentacija na voljo. Ogled na lokaciji je možen. Ncjdpfx Aljw Rqwtetsw

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Product Description: Cormak 2-ton gantry crane is a specialized industrial machine designed for moving heavy loads within factory halls. The crane consists of several components, including a load-bearing frame, a trolley, and additional parts that facilitate easy, safe, and precise horizontal movement of loads, as well as their lifting and lowering with hooks. This model stands out primarily due to its durability and stable construction, enabling use under heavy industrial conditions. The crane is also torsion-resistant, thanks to additional reinforcements applied in its structure. One of the key features of the crane is its four return rollers, which ensure effortless movement of heavy loads. These rollers are highly wear-resistant and robust, guaranteeing a long service life. Another important element is the integrated parking brakes that ensure safe stopping of the crane at any position. The height adjustment is straightforward and safe when the crane is unloaded, using two locking screws per support. The structure of the crane is robust and stable, and its user-friendly operation makes it an ideal solution for companies needing an efficient and reliable machine for moving heavy loads. Furthermore, a variety of optional accessories enables the crane to be adapted for an even wider range of applications in diverse industrial sectors. Thanks to its efficiency and precision, the gantry crane is a versatile working tool that can be further equipped with wire rope or chain hoists. When used with a pulley block, the crane with a hoist or chain enables even more precise and effective handling of heavy loads. As a result, it finds application in multiple industries, such as construction, metallurgy, and the chemical sector. With the gantry crane, tasks such as warehousing, assembly, loading and unloading, and repairs can all be performed with high accuracy and safety, leading to increased work quality. Technical Specifications: Capacity: 2000 kg Double T-beam: 100 x 180 mm Ncedpfx Aljridh Notjw Height: 2400 mm – 3600 mm Width: 2360 mm Weight: 168 kg Crane supplied without hoist shown in the pictures.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Ncjdpfx Alop Audqstow Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Stanje: novo, lastna masa: 5.500 kg, skupna masa: 19.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 11.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.100 mm, vzmetenje: zrak, velikost pnevmatike: 215 75 17,5, Oprema: žerjav, KALEPAR TRAILER - KLP 119V2 TRUCK TRANSPORTER - 1x 9-ton SAF or BPW axle - 100% galvanized - Gross vehicle weight (GVW): 19,500 kg - Unladen weight: approx. 5,500 kg - Wabco 2S-2M EBS braking system - Aspöck 24V electrical system - EU standard - Air suspension - Hydraulic cable winch Hammerwinch 8 t with radio remote control (Teleradio) - Hydraulic rear extension, full width 2550 mm x length 1500 mm - Length: 11,800 mm - Length with extension: 13,300 mm - Width: 2,550 mm - Fifth wheel height: approx. 1,050 mm - 1,150 mm (other heights possible) - Tire brands: Goodyear, Pirelli, or Continental with twin tires - Spare wheel with mounting bracket - 24V 4.5kW electro-hydraulic motor for winch, loading platform, and rear extension - Custom modifications available on request - Choice of paint finish free of charge - All documents (COC, TÜV, etc.) for registration available Nodskbyt Ijpfx Altocw For more info: kalepar *The pictures are for illustration purposes only. Copyright cannot be claimed.