Stroj za brizganje

Arburg 520 C 2000-675 181961

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 787 kW (1.070,02 KM), vrsta hlajenja: zrak, skupna masa: 7.056 kg, skupna širina: 2.260 mm, skupna dolžina: 6.500 mm, skupna višina: 2.500 mm, Zračno hlajen chiller YORK YAES 787 kW Bjdpfx Afsh E Tpweqsdk Hladilna zmogljivost: 787 kW Leto izdelave: 2005 Hladilni krog: 2 kom. Tip hladiva: R134A Kompresorji: 2 kom. York (vijačni) Število ventilatorjev: 10 kom. Dimenzije: 6,50 x 2,26 x 2,50+0,06 m Teža: 7056 kg Stanje: odlično Brez 2 ventilatorjev

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Bodsd Nl E Uspfx Afqedk Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Stanje: zelo dobro (rabljeno), a truly unique one-off piece, approx. 12 x 6 m Bsdpfx Aofi Tmcefqsdk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 56.000 h, Naprodaj: brizgalni stroj Arburg 570-2000-800, letnik 2008. V zelo dobrem tehničnem in vizualnem stanju, zelo tiho delovanje, brez puščanja olja. Upravljanje Selogic. Bimetalni brizgalni sistem Fi 45 mm. 1 x zrak, 2 x hidravlično jedro. Izhod za robota. Stroj se prodaja brez dovajalnika materiala in barvila. Bjdpfx Aeukirbjfqodk

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. Bedpfotyyn Hjx Afqedk 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible.

Stanje: zelo dobro (rabljeno), Engel Victory 1350/220 Tech Clamping Force: 220 tonnes Year of Manufacture: 2004 Platen Size (W x H): 860 x 830 mm Screw Diameter: 55 mm (618 cm³) Bjdpfx Afspdrpzjqsdk Control System: CC 200 Minimum Tool Installation Height: 250 mm Maximum: 730 mm

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT30 - Spindle drive power: 6.7 [kW] - Spindle speed: 10,000 [rpm] LINEAR AXES - Travel X/Y/Z axes: 700 x 400 x 300 [mm] - Rapid traverse speed (X/Y/Z): 50 / 50 / 56 [m/min] - Feed rate (X/Y/Z): 1 - 30 [m/min] - Distance from table to spindle nose: 330 - 630 [mm] TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 21 - Tool change time: 0.8 [sec] TABLE - Table size: 800 x 400 [mm] - Max. table load: 250 [kg] ELECTRICAL SUPPLY - Supply voltage: 220 [V] - Total power consumption: 9.5 [kVA] WEIGHT AND DIMENSIONS - Space requirement: 2,050 x 2,220 [mm] - Machine height: 2,497 [mm] - Machine weight: 2,400 [kg] ACCESSORIES - Control: Brother CNC-C00 - Interface: Ethernet / USB - Electronic handwheel - Rotary table type: 4th CNC axis integrated * Coolant tank * with high-pressure pump Bdjdpfxevt Eife Afqjk - Internal coolant supply (IKZ) - Electrical transformer

Leto izdelave: 1996, obratovalne ure: 24.222 h, Stanje: dober (rabljeno), This injection moulding machine from Dr. Boy is currently available at Plastima Used Machinery in their equipment warehouse. The machine dates from 1996 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 80M Bdodpfxepwh Ake Afqok – Year of manufacture: 1996 – Screw diameter: 42 mm – Shot volume: 200 cm³ – Clamping force: 80T – Operating hours: 24,222

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Bedpfx Ajfrvzvofqodk Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Machine weight approx.: 32 t From series production Bjdpfxetunccj Afqodk