Klimatska omara 335 litrov

Weiss WK-340/70 -70 °C bis +180 °C

Stanje: zelo dobro (rabljeno), Type: WK3-340/70 Weiss Climate Test Chamber, Water-cooled Control Unit: "Touch Panel" All control and operation commands can be initiated by simply touching the function symbols on the “Touch Panel” control unit. Adjustable Feet To compensate for floor unevenness and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measurement cables and test devices to be routed into the test space. Feedthroughs included in standard configuration: R1: nominal width 125 mm L1: nominal width 85 mm Volume: 335 liters Test Space Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specification for Temperature Tests: Minimum Temperature: –72°C Maximum Temperature: +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature uniformity spatial: ±0.5 to ±1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specification for Climate Tests: Temperature range: +10°C to +95°C Dew point range: –3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ±0.1 to ±0.3 K Ihedpfx Ajxmg Sdef Tst Temperature uniformity spatial: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3% RH Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW Fuse required on site: 16 A slow-blow Refrigerant: R-452A/R23 Weight: Approx. 585 kg Safety Information for Buyers! The following steps are completed on our offered chambers before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and data subject to change and errors excepted!) For further inquiries, feel free to contact us by phone.

Stanje: novo, Mesoreznica S32F Unger sistem 5 orodij Proizvajalec: Sind Model: S32F Ihsdpfx Aop R Sdwsf Tet Dimenzije: 600x550x1000 mm Električna moč: 1,5 kW Kapaciteta: 500 kg/h

Stanje: novo, Leto izdelave: 2025, The skyCUBE M laser processing center – the new benchmark in laser material processing! PFEIFER Laser Processing Center skyCube M Laser machine with 200W CO2 laser – available immediately Mclass = Processing area X 1250 x Y 650 x Z 300 mm skyCUBE M Laser Processing Center – the new Mclass multifunction laser engraving and cutting machine – easy laser processing, high precision – laser engraving and cutting with high speed and quality. Ihsdpfxj Sfanj Af Tjt Our new and best multifunctional system impresses even the most experienced user with its innovative design. This CO2 laser/fiber laser demonstrates outstanding performance in all industrial applications as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser. With an optional laser power of up to 1000W (1kW), the CO2 laser device/fiber laser system is extremely versatile for use in your production environment. skyCUBE laser units comply with all requirements of Class 1 according to DIN EN 60825-1, offering you maximum safety. Depending on the selected and installed laser power, this CO2 laser/fiber laser is perfectly suited for cutting and engraving a wide range of materials such as metals, acrylic glass, solid wood and wood composites, wood-based materials, paper, cardboard, various plastics and foams, textiles, and much more. The excellent engineering – 100% produced in Plauen – guarantees users from metal fabrication to laser source a high working accuracy with consistently high quality. With cutting speeds up to 8000 mm/s and engraving speeds up to 4000 mm/s, the advanced laser technology ensures clean, ultra-sharp cutting edges and precise laser engravings. The ergonomic design featuring a pull-out worktable simplifies loading the machine. A drawer in the lower section collects processed material efficiently. User-friendly and intuitive – the included skyCUBE PC software (ready for Windows®). A straightforward, practical user interface adapted to the Windows standard enables fast and effective operation. High system stability, professional monitoring, efficient machine operation and control, as well as compatibility with conventional file formats characterise the software. Data output is organised by layers – each layer defined separately, including sequencing and process type. Parameters such as laser power and processing speed are automatically stored for each layer and can be retrieved from a materials database at any time. Laser projects are transmitted to the skyCUBE M processing center via a computer connected through LAN/USB interface. Projects can be executed repeatedly, even without the PC being on. A modern touch control panel provides access to all system information and functions. skyCUBE M Laser Processing Center at a glance: - German industrial-standard welded steel construction for secure and vibration-free mounting of laser components and axis systems, equipped with mobile industrial leveling feet - 8" touchscreen display – better overview, more control, enhanced communication with the skyCUBE M laser processing center - Redundant safety system – Class 1 laser

Stanje: rabljeno, Leto izdelave: 2000, Table length 1160 mm Table width 710 mm Clearance 650 mm Control system WENZEL ME 5007 Total power requirement kW Machine weight approx. 800 kg Space requirements approx. m W E N Z E L CNC-controlled vertical 3-D coordinate measuring machine Type LH 54 CNC, year of manufacture 2000 - Continuously maintained and calibrated by the manufacturer Y-axis: longitudinally traversing measuring bridge 600 mm X-axis: crosswise measuring head slide 500 mm Z-axis: vertical measuring quill approx. 400 mm Max. workpiece weight / table load approx. 200 kg Clearance under measuring bridge approx. 650 mm Usable total table size approx. 1,160 x 710 x 160 mm Table height above floor approx. 850 mm Machine height approx. 2,300 mm Weight approx. 800 kg Special equipment / accessories: • Machine delivered with increased accuracy Ijdpfx Afot Hw S Ie Toht • Measuring table, bridge, and quill made of dark natural hard stone, table with 3 x 4 threaded holes for fixture/workpiece mounting • All axes are air-bearing, enabling smooth and virtually wear-free operation, equipped with incremental scales with 0.0005 mm resolution. • WENZEL CNC control system type ME 5007 for 3 to 6 axes, equipped with ME 4700 portable manual control panel with 2 joysticks for activating all software functions – ideally set up for: • WENZEL measuring software type METROLOG – II Level 2 for measuring regular geometry, graphic 3D workpiece visualization, graphical protocols, etc. including keyboard • RENISHAW control unit model PHC 10 – 2 suitable for • RENISHAW motor-driven rotary and swivel head (automatically indexable in 7.5° steps), model PH 10 T with 5-way probe system model TP 200 with various probe accessories, incl. RENISHAW probe interface PI 200 Automatic probe change possible; 6-position probe magazine model SCR 200 mounted on the table • Reference sphere for mounting on the table, working table with console, various clamping devices • Various cassette tapes and CDs with different software. Separate PC for measuring software and printer Condition: Very good – in stock, can be inspected under power, ready for demonstration, dismantled by a coordinate measuring machine specialist at the seller and reassembled here. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: zelo dobro (rabljeno), Weiss Model: WKL 34/60 Weiss Climate Chamber, Air-Cooled Refrigerant converted to R-452A -60°C to +150°C Chamber volume: 34 liters Feedthroughs included in standard configuration: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Performance Data for Temperature Testing: Temperature range: -60 to +150 °C Temperature variation in stabilized state (per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 1 K, ± 1 to ± 2 K Spatial temperature deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Performance Data for Climate Testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (in stabilized state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.h. Operating Data: Test chamber lighting: Halogen bulb 12V, 20W Nominal voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Nominal power: 2.5 kW Nominal current: 11 A Required customer-side fuse: 16A slow-blow Heat dissipation for air-cooled chambers: Max. heat emission to environment: 1700 W Refrigerants: R-452A / R23 Weight: 140 kg Ijdpfjtr Dinex Af Teht For your safety as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors, all details are non-binding!) If you have any further questions, we are happy to answer your calls.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.750 mm, skupna širina: 1.650 mm, skupna višina: 2.630 mm, skupna masa: 1.800 kg, The GEA Multi Former MLF 400 is a state-of-the-art machine designed to shape a wide range of food products with precision and efficiency. Thanks to its advanced technology, it ensures fast and uniform production, delivering high output while maintaining consistent product quality. This former is ideal for products such as meatballs, hamburgers, and patties, offering flexibility that easily adapts to various types of raw materials. Furthermore, the GEA Multi Former MLF 400 is engineered to maximize production efficiency while minimizing material losses. Its intuitive and ergonomic operation allows for quick setup, reducing downtime. In addition, the machine is built to meet strict hygiene and safety standards, making maintenance easy and ensuring clean, continuous operation. In summary, the GEA Multi Former MLF 400 is a reliable and high-performance solution for food businesses looking to optimize their manufacturing processes while ensuring consistently high-quality results. Technical specifications: Type: 400 MLF Hopper: 320 L Maximum forming weight: 1.1 kg Maximum output: 65 cycles/min Belt speed: 1.5 to 15 m/min Discharge height: 1015 to 1143 mm Machine weight: 1,800 kg Ihjdpju E Rgkefx Af Tet Power: 23 kW Air supply: 6 bar, 300 L/min Water supply: 4 bar Noise level: 84.5 dB Dimensions (L x W x H): 2752 x 1652 x 2636 mm Programmable via PLC

Stanje: novo, Pressure: 17.0 kN Stroke: 40 mm Iodpfx Afjfv Avvs Tsht Throat depth: 110 mm Working height (min–max): 70–220 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight approx.: 60 kg Dimensions (L x W x H): 310 x 190 mm Toggle-lever pneumatic presses Including fine adjustment of working height via bevel gear and side crank — convenient and easy to set. Toggle-lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, STC-Ref: G-821-0097 Duplo DSF-6000-Pro DIGITAL, year of manufacture: 2021, Total count: 1.8 million Max. sheet size: 356 x 525 mm Features: - 2 x Duplo i Saddle Ring Eyelet Stitching Heads - DBMS-T Front Trimmer - DKT-200 Head and Foot Trimming - DBM-LSW Long Band Delivery - PC controller - Parallel Slit Device 6mm for DKT-200 - Cover Feeder for DSF6000 - Touchscreen - DKT-200 Production Counter - DSF-6000 Digital Sheet Feeder - Barcode Kit for DSF 6000 Cover Feeder Iodpfx Afjv U Tvps Toht - Barcode Kit for DSF 6000 Content Tray - Duetto LDR Bridge for DSF - 2 x DSC-10/60 i Collating Towers - Bridge - DBMS-F Collating, Creasing and Plough Folding Module - DBMS-S Saddle Stitching Station 2 x Hohner Heads - 2 x Extra Knives (upper/lower) -->Available from: 04/2025

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Offered is a conventional universal cylindrical grinding machine EMAG Weiss Eco 200. This ultra-compact machine is especially designed for users who do not require CNC control but still demand the highest processing quality. The machine is easy to operate and offers excellent accessibility, allowing for quick setup and changeover. TECHNICAL DATA Workpiece diameter: max. 200 mm Workpiece length: max. 400 mm Centre height: 100 mm Workpiece weight: 30 kg Workpiece headstock – Mount: MT4 Tailstock – Mount: MT3 Ihjdstmqcwepfx Af Tot Grinding wheel diameter: max. 350 mm Price, delivery time, and machine configuration upon request.

Stanje: novo, Pressure: 34.0 kN Stroke: 40 mm Throat depth: 130 mm Working height (min. – max.): 80 – 240 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Toggle lever pneumatic presses Including fine adjustment of the working height via bevel gear with side-mounted handwheel, comfortable and easy to set. Ihodpfxjfv Avyo Af Tst Toggle lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.