Prenosne stroji nakup rabljenega (49)

Stanje: rabljeno, Technical Specifications: Number of spindles: 9 units Total power requirement: 83.0 kW Machine weight approx.: 17.0 t TRANSFER AUTOMAT with 9 drilling and milling spindles Hfjdpfxju Idvke Afwjf - On the right: 3 drilling and milling spindles, 9-speed, gear-driven, fixed; and on the left: 3 drilling and milling spindles, 9-speed, gear-driven, fixed; as well as 3 radial drilling and milling spindles, 9-speed, gear-driven, fixed inside diameter.

Stanje: rabljeno, Technical details: Hsdsu Idwnepfx Afwsff Number of spindles: 9 units Machine weight approx.: 10.2 t TRANSFER MACHINE with 9 drilling and milling spindles - right side: 2x drilling and milling spindles and 1x tapping spindle, each with 9 steps - left side: 2x drilling and milling spindles and 1x tapping spindle, each with 9 steps, plus 2x radial drilling and milling spindles (flexible) and 1x tapping spindle, 9 steps, flexible in. D.

Stanje: rabljeno, Technical details: Hfjdpfxeu Idxrs Afwjf Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Machine weight approx.: 17.0 t Space requirements approx. (LxWxH): 5.0 x 6.2 x 3.8 m Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 2300 mm No. 4: LxWxH: 1300 x 650 x 2350 mm TRANSFER AUTOMAT with 3 work stations and 15 drilling/milling spindles For example, for the production of fittings in larger quantities Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm - Left: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm; radial 3x drilling and milling spindles, including 1x U-axis and 1x thread cutting spindle - 1st thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic power units - Chip conveyor system - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Control panel - Hand-held selector switch in process.

Stanje: pripravljen za uporabo (rabljen), Length: 8,225 mm, width: 3,200 mm, complete with documentation. Hfedpfxoi Ew Dpj Afwof

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Max. workpiece diameter: 42 mm, connected load: 132 kVA, length: 4,600 mm, width: 7,500 mm, height: 3,000 mm, with bar feeder. Hodpfx Afep S Sq Djwsff

Stanje: rabljeno, Rotacijski transferni stroj znamke Technica, model Stemoflex Hfodpfx Aoydcm Hjfwsf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, 3 Rotary Transfer Lines + 3 Linking Robots OVERVIEW - Bar feeder - Rotary transfer line 1 (sawing + machining operation 1) - Rotary transfer line 2 (machining operation 2) - Placement onto conveyor belt - Marking - Deburring station - Stacking cell with ejection of measuring parts TECHNICAL DETAILS Process description Step 1: Manual placement of bars onto the bar magazine Step 2: Automatic insertion of the bar and cutting off the workpiece Step 3: Robot takes the workpiece from the sawing clamp and transfers it to the clamping device of rotary transfer line 1 (station 1) Rotary transfer line 1 (Machining Operation 1) Station 2: Contour milling left and right Station 3: Contour milling top Station 4: Slot milling (2×), drilling Ø 6.5 mm (4×) Station 5: Drilling Ø 5 mm (4×), threading M6 (2×), slot milling 20 × 5 mm, drilling Ø 7.5 mm (2×) Station 6: Transfer to second line Rotary transfer line 2 (Machining Operation 2) Station 1: Robot takes part from station 6 of line 1 and places it in the clamping fixture of the second rotary transfer line Station 2: Contour milling bottom Station 3: Slot milling (2×) Station 4: Contour milling bottom (2×) Station 1 (again): Discharge onto conveyor belt Cycle time: 25 s Tolerance: +5% Bar feeder Bar magazine: for 2000 - 6000 mm bar material Magazine width: approx. 2100 mm Loading height: approx. 1200 mm Parts buffer: 10 bars Rotary Transfer Line 1 - SEMA RTA 55/6-SA-NC-R Control: Siemens Sinumerik 840 D sl Spindle units: 5 Tool turret: 1 Feed axes: 14+1+5 NC axes Rotary Transfer Line 2 - SEMA RTA 55/4-NC-R Stations: 4 Control: Siemens Sinumerik 840 D sl Spindle units: 4 Feed axes: 9+1+3 NC axes Discharge Conveyor Chain conveyor: workpiece carriers made of plastic Inclination: approx. 3° Length: 8,000 mm Part detection: at loading station / marking station / unloading station Rotary Transfer Line 3 - SEMA REA 30/5-6S-NC-R Number of deburring positions: 5 Control: Siemens Simatic S7 Loading station: 1 Machining units: 6 Deburring cell extension: Blowing off workpieces Robot: for loading and unloading the deburring station, as well as stacking with SPC drawer MACHINE DETAILS Noise level: 80 dBA Connection: 400 V, 50 Hz Hfjdpfx Afjwqf R Newjf Model RTA55/6-SA-NC-R Connected load: approx. 95 kW Dimensions (L × W × H): 5,500 × 4,400 × 3,700 mm Weight: approx. 32,000 kg Model RTA55/4-NC-A Connected load: approx. 65 kW Dimensions (L × W × H): 4,500 × 4,500 × 3,700 mm Weight: approx. 20,000 kg Model REA 30/5-6S-NC-R Connected load: approx. 30 kW Dimensions (L × W × H): 3,000 × 3,000 × 3,000 mm Weight: approx. 10,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Travel Z-axis: 150 mm Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Hodpfxjwy I Tlo Afwoff Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing machine MIKRON MULTISTAR CX 24 Machine can be inspected under power Part setup possible without issue. with MITSUBISHI AACPU-S1 control unit – Machine year 1996 – Detailed technical data as per attachment – Machine can be inspected in operation (under chip load). Modification – Installation – Setup – Application support can be offered. Pricing: ex site, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Technical data non-binding – subject to error. Hsdpfx Aot I T N Eefwjff Payment: As customary for used machines, strictly net before collection.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8450-02-001, premer vrtljive mize: 4.000 mm, Oprema: transportni trak za ostružke, TECHNICAL DETAILS Rotary indexing table diameter: 4,000 mm Processing stations: 12 Axis configuration: 4 × 3 axes, 8 × 2 axes Clamping chucks: 12 units for tool holders Drilling units: NC-controlled Accessory systems Hfedpjxur Rujfx Afwef Chip conveyor: Knoll, type 500K-1/500, year of manufacture 2001 Coolant system: available Filtration system: available Measuring device: integrated MACHINE DETAILS Identification number: 8450-02-001 Customs tariff number: 84573010 Weight Machine: 6,000 kg Control cabinet: 800 kg Coolant system: 600 kg Dimensions Working height: 1,170 mm Machine height: 2,220 mm Footprint: 5,231 x 4,540 mm EQUIPMENT - Rotary indexing table with large diameter of 4,000 mm for comprehensive machining operations - 12 NC drilling units with 12-position clamping chuck setup - Integrated chip conveyor of type Knoll 500K-1/500 - Complete system including filtration and coolant systems - Measuring system and automatic loading/unloading for fully automated operation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HB32-571, Oprema: dokumentacija / priročnik, transportni trak za ostružke, TECHNICAL DETAILS Number of CNC units: 8 Control: Siemens Chip conveyor: Knoll Hfjdpfewkd A Dsx Afwjf Filtration system: Vacuum rotary filter High-pressure system: Combiloop Bar loader: 3 m UNIT ALLOCATION PLAN Station 1: Sawing Station 2: Hydraulic drilling Station 3 H: CNC turning Station 3 V: Hydraulic drilling Station 4: CNC turning Station 5: CNC turning Station 6 H: Hydraulic drilling Station 6 V: CNC turning Station 7: No unit Station 8: CNC turning Station 9: CNC turning Station 10: Hydraulic drilling Station 11: Hydraulic drilling Station 12: CNC turning Station 13: CNC turning Station 14: Milling Station 15: Hydraulic drilling Station 16: Hydraulic drilling EQUIPMENT - Platform - Declaration of conformity

Stanje: rabljeno, Leto izdelave: 2010, x-axis travel: 450 mm y-axis travel: 400 mm z-axis travel: 320 mm Tool holder: HSK 63 Spindle speeds: 0 - 10,000 rpm Rapid traverse: 30 m/min Control: GE FANUC Series 16 i System for the machining of fittings, valve bodies, couplings, and similar components. Comprising: 1 used flexible manufacturing cell (transfer machine) by RIELLO, model VERTIFLEX VFX 450-2/1-0/1-V, year 2010, with 2 three-axis machining modules, each equipped with an 8-position tool turret. Travel ranges for Module 1: X1/Y1/Z1 = 450/400/320 mm Travel ranges for Module 2: X2/Y2/Z2 = 450/400/320 mm Tool holder for each module: HSK 63 Rotary table with two integrated workpiece holders diameter 400 mm each (B-axis for each workpiece holder: 360 x 1°), through-spindle coolant Accessories: chip conveyor, coolant system Connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) by RIELLO, model VERTIFLEX VFX 450-2/2-0/1-V, year 2003, with 3 three-axis machining modules, each equipped with an 8-position tool turret. Hodotqqqmjpfx Afwsff Travel ranges for Module 1: X1/Y1/Z1 = 450/400/320 mm Travel ranges for Module 2: X2/Y2/Z2 = 450/400/320 mm Travel ranges for Module 3: X3/Y3/Z3 = 450/400/320 mm Tool holder for each module: HSK 63 Rotary table with two integrated workpiece holders diameter 400 mm each (B-axis for each workpiece holder: 360 x 1°), through-spindle coolant Accessories: chip conveyor, coolant system youtu.be/vo4ZI_dvEZk

Stanje: rabljeno, Leto izdelave: 2001, Stations: 10 / 22 Tool Holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total Power Requirement: approx. 112 kW = Transfer Machine Hedpfxstqqlqs Afweff Drum-type indexing table with 10 workpiece stations, 22 machining units (Drilling: 7 units, Drilling & Tapping: 8 units, Drilling & Countersinking: 5 units, Drilling, Countersinking & Tapping: 2 units), each with SK 40 tool holders, motor power per unit between 4.0 and 4.5 kW, SIEMENS control system SIMATIC OP 3, equipped with an ABB loading robot. Accessories: Chuck (without jaws), chip conveyor, coolant system.

Stanje: rabljeno, Leto izdelave: 1997, Stations: 10 / 22 Tool holder: SK 40 Control: SIEMENS SIMATIC OP 3 Hfjdpfx Afstqqlrowof Total power requirement: approx. 130 kW = Transfer machine Indexing drum with 10 workpiece stations, 22 machining units (drilling: 10 units, drilling & tapping: 5 units; drilling & countersinking: 3 units; drilling, countersinking & tapping: 1 unit; tapping: 3 units), Tool holders: SK 40 for each unit, motor power per unit between 4.5 and 5.5 kW, SIEMENS control: SIMATIC OP 3, loading robot: ABB Accessories: chuck (without jaws), chip conveyor, coolant system

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: nefunkcionalno, skupna višina: 2.500 mm, skupna dolžina: 12.000 mm, skupna širina: 4 mm, moč: 65 kW (88,38 KM), skupna masa: 10.305 kg, Premer palice (maks.): 110 mm, Premer cevi (maks.): 110 mm, stružna dolžina: 350 mm, premer obdelovanca (maks.): 110 mm, Oprema: dokumentacija / priročnik, We are offering this used Sinico SIN-O-MATIC TOP 2000 saw and end-finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Hfedpfx Afsycr Nhewof Type: TR110/2-350-CL-S CNC Serial number: 1459 Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 Max kW CNC control: NUM Automatic machine for cutting to length and end-finishing. Transfer machine with a horizontal axis table for cutting and end-machining of pipes and bars. Flexible and highly adaptable CNC machine. It ensures high productivity, up to 2,500 pieces/hour, and is designed for machining small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility for processing tubes and bars. Capable of performing the following operations: Beveling – Face milling – Thread cutting – Forming – Marking Various spare parts, clamping jaws, and accessories are included. The machine is still assembled, but it has a fault and therefore cannot be demonstrated. If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: rabljeno, Leto izdelave: 2013, Article: Rotary Transfer Machine Make: Pfiffner Model: Hydromat HB 32-45/16 CNC Year of manufacture: 2013 Electro-hydraulic control, fully automatic Excerpt from offer: Coolant system with chip conveyor and Knoll vacuum rotary filter High-pressure pump 50 bar Second coolant ring Water cooler type 1600 Collets type B32-45 UP Control: Siemens Sinumerik 840D – CNC / S7-PLC incl. modem (for teleservice) 1 bar feeder magazine type IEMCA: bundle loader (year 2011) 1 cut-off unit: saw blade D250mm 2 feed units VE 26/80-HSK: spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 32 2 vertical slides 26/80 with 36° angular position 2 drilling heads 26/80-HSK: HSK 32 1 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40 4 feed units VE 36/100-HSK internal coolant: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply 6 drilling heads 36/1000-HSK: HSK 40 2 CNC X-Y-Z turning devices outside the collet plate: pick-up unit NC 26/100; 2 deburring spindles Hedpfxoruvaqo Afwjff 1 CNC horizontal cross slide 26100-HSK: X/Y travel 1 CNC feed unit VE 36/100-HSK internal coolant: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply 2 CNC turning units 50/100-PSK: with face slide head ES-PDK-12 (inserter with 2 tool holders); Z-axis 100mm; X-axis 12mm; n max. 5000 rpm; 4kW 1 turning unit WDE 30/60 1 turning tube with insert rod 3 chip break valves SBV-100 Tool monitoring Please contact us for further information and pictures via mail(at) or

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, EUBAMA S6, year 2010. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 450 mm Maximum output (cycles/min): 40 Hydraulic clamping system Machine control: CNC Siemens 840 D Number of machining units: 15 PRA 52 P IEMCA bar feeder Hfedpfsv Ef N Aox Afwef Magazine loading capacity: 4 meters KNOLL chip conveyor KNOLL coolant tank The machine is in working condition.

Stanje: rabljeno, Leto izdelave: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of manufacture: 1971 Weight: approx. 4,500 kg General / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 3 – Vertical drilling unit Type: BE VK, Mounting for collets Station 4 – Horizontal drilling unit Type: BE VK, Mounting: collet sleeve Ø 36 mm Station 5 – Vertical spindle unit Type: BE VK, Mounting: collet sleeve Ø 28 mm Station 6 – Horizontal drilling unit Type: BE VK with additional guide, Mounting: collet sleeve Ø 28 mm Station 7 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Hedpfxsw E Hpvs Afwsff Station 8 – Vertical spindle unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 28 mm Drilling unit feed: mechanical feed via quill Rotary indexing table: mechanically actuated, 8 positions, Ø 500 mm Workpiece clamping: manually operated via collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / Connected load: 380 V, 50 Hz Accessories / Special features: • Designed for large-scale production • The machine is equipped with a robust cast machine table with chip removal to the rear and a separate large coolant tank • Extensive range of clamping and auxiliary tools included • The machine features a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Very robust machine bed – ideally suited for the construction or rebuilding of a special-purpose machine

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1969, Manufacturer: Steinel Model: 6 Station Rotary Indexing Drilling Machine BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 Hfjdpfx Afew H I R Rswef Station 1 – loading and unloading Station 2 – vertical drilling unit type: BE 10 VK Station 3 – horizontal drilling unit Station 4 – horizontal and vertical drilling unit type: BE 6 VK Station 5 – horizontal spindle unit type BE VK with additional guide, fitting: clamping sleeve Ø 28 mm Station 6 – horizontal drilling unit and vertical tapping unit type: BE 6 VK Feed for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary indexing table: mechanical indexing with 8 positions Ø 400 mm Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production • The machine features a robust cast iron machine table with chip disposal to the rear and a separate large coolant tank (outlet to the back) • Safety light curtain by Sick • Extensive range of spare parts, spindle units, and rotary indexing tables included • The machine is equipped with a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1967, Manufacturer: Steinel Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of manufacture: 1967 Weight: approx. 3,000 kg General Information / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling operations with multi-spindle heads Drilling units: 4 units Station 1 – Loading and unloading Station 2 – horizontal drilling unit type: BE 10 VK Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Feed of drilling units: mechanical feed via quill Drilling heads: multi-spindle drilling units Hodsw H Rh Sopfx Afwoff Rotary indexing table: mechanically indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic via centric expanding mandrel, workpiece Ø approx. 80 mm Dimensions of machine (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Features: • Machine designed for large batch production • Stable cast iron machine table with side chip removal and separate coolant tank • automatic safety guard door • 5-station rotary indexing table • heavy-duty cast iron machine table, ideal for custom rebuilding or retrofitting • machine suitable for refurbishment / rebuild

Stanje: rabljeno, Leto izdelave: 1963, Funkcionalnost: nepreverjeno, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling operations on small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Hfjdpfxjwyn S Uj Afwef Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical threading unit Feed of drilling units: mechanical feed via quill Drill heads: single spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt 50 Hz Accessories / Special equipment: • The machine is designed for mass production • The machine has a robust machine table with chip disposal to the underside of the table center and a separate large coolant tank • Extensive range of clamping and auxiliary tools • The machine is equipped with a 6-station rotary indexing table

Leto izdelave: 1988, stanje: rabljeno, Eubama S5 Rundtaktmaschine Hfedodg Da Iepfx Afwsf Seriennummer: 5531 Baujahr: 1988 Sehr guter Zustand Seit 15 Jahren unbenutzt

Stanje: novo, Leto izdelave: 2021, Naprava: Grabilnik za okrogle bale Lastna teža: 7.500 kg Hfedpfx Afspa Rmkowjf Primerno za uporabo z: Dvižno napravo

Stanje: rabljeno, Hydromat HB45-12 SN 220291-81 12 postaj Kapaciteta: 45 mm Žaga, podajalnik palic, inverter Hedpfoyzkd Asx Afwsff Konfigurirano kot na sliki (3-osni CNC suport ni vključen)