Welter nakup rabljenega (8)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The Gleason-Welter 2000 T bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for single-flank rolling tests of bevel gears and crown gears. Technical Data Pgjdpfewn D Uhsx Agwou - Diameter: 2000 mm - Spindle bore: 310/250 mm - Test speed: 5-100 rpm - Dimensions: approx. 4,200 x 4,500 x 2,300 mm - Machine weight: approx. 12,500 kg *Specifications and data are non-binding. Subject to prior sale. Special Features: Angular hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with diameters up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as spur, helical, and internal gears. Deviations in gear geometry, machining errors due to defective tools, and damage to the gearing can thus be detected and eliminated even before assembly. The following parameters can be measured: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis If you have any technical questions or require further information, you can contact us at any time.

Stanje: rabljeno, Wheel diameter – max. 1800 mm Wheel width 725 mm Module – max. 5 Control system Siemens 840D sl Axial travel 725 mm Infinitely variable speed range 44 – 440 rpm Cutter diameter max. 240 mm Cutter width – max. 300 mm Table diameter 1500 mm Bore diameter 350 mm Machine weight approx. 27 t Psdpfx Asvyliregwegu Required space approx. 8.8 x 6.1 x 3.25 m Equipment / Accessories: - Max. distance from clamping table to tailstock/to the center of milling spindle: 1045 mm - Milling spindle: - Max. center distance between milling spindle and workholding spindle with/without tailstock: 1200 mm - Min. center distance between milling spindle and workholding spindle with/without tailstock: 525 mm - Quick-change milling arbor system - Chip extraction system - Milling arbors - Documentation

Stanje: rabljeno, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and drive technology for noise and contact pattern testing of bevel and hypoid gears. Psdpfx Agoxpq Nlowsgu Technical Data Diameter: 540 (400) mm Hypoid: ±50 mm Pinion spindle diameter: 90 mm Dimensions: 1,800 x 1,800 x 1,600 mm Machine weight: approx. 2,800 kg *Specifications and data are non-binding. Subject to prior sale. Special Features: This machine is intended for noise and contact pattern testing of bevel and hypoid gears of all types. By simulating operating conditions, applying different speeds, and changing load conditions for drive and coast sides, the optimal mounting distance for stationary operation can be determined. • Digital actual value display for 2 axes • Stepless speed adjustment via frequency converter • Electrically interlocked and removable safety guard • Accessories – wide range of workpiece fixtures • Condition: very good

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, The Höfler Helix 400 gear grinding machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technology for the process of profile grinding of gears. Special features: Ideal machine for single-part and small-batch production Technical data: Gear diameter: 400 mm Module – max.: 0.75–10 Face width: 200 mm Space requirement approx.: 3.0 x 4.5 x 2.5 m Machine weight approx.: 8,500 kg Psdpsvd Ehpjfx Agwegu *The picture shows the machine in its current used condition. On request, the machine can be offered partially modernized, or as a retrofit with new CNC control (Siemens ONE) and acceptance according to the manufacturer's standard.

Stanje: zelo dobro (rabljeno), The HURTH MODUL ZSTK 251 bevel gear shaping machine was designed as a special-purpose machine and is used by manufacturers of drive systems in the fields of drive technology, automotive, agricultural machinery, machine tools, mining technology, aerospace, and textile machinery for the gear shaping of straight bevel gears with short run-out. We have 1 of these machines still in stock, which, when combined with the Klingelnberg BF 203 bevel gear milling machine, is also capable of producing high-quality crowned bevel gear sets. Technical Specifications Workpiece diameter: 315 mm Max. module: 10 mm Gear width: 45 mm Dimensions: 2.7 x 2.3 x 2.1 m Pgjdpfxoup T Rlo Agwou Weight: 7,000 kg *All information and data are non-binding, subject to prior sale. Inspection under power can be arranged by appointment.

Stanje: pripravljen za uporabo (rabljen), The Klingelnberg KNC 60 spiral bevel gear milling machine is designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technologies for the milling process of spiral bevel gear sets. Technical Data Klingelnberg KNC 60 CNC Max. gear diameter: 650 mm Maximum face width: 120 mm Module: 2.2–12 mm Number of teeth: 5–120 Psdpfx Agovyd Ndswjgu Hypoid offset: +/- 100 mm Applicable cutter head radii: 55, 100, 135, 170, 210 mm Machine weight: approx. 16,000 kg Dimensions (L x W x H): 5750 x 2800 x 2700 mm *The image shows the machine in its current used condition. Upon request, the machine can be offered partially modernized or fully retrofitted, including a new CNC control unit (SIEMENS ONE).

Stanje: dober (rabljeno), The Klingelnberg BF 203 bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used for milling straight-toothed bevel gears. The image shows the machine in its current as-is condition as a used machine. Pgsdpfxolxzmij Agwju Specifications: Gear diameter: 240 mm Module - max.: 10 Face width: 60 mm Space requirements approx.: 2.3 x 2 x 1.7 m Machine weight approx.: 6,700 kg Further information regarding available options and the current purchase price upon request. *All information and appointment dates are subject to change and prior sale.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, The Klingelnberg PKE 300 H (PSKE 900) bevel gear testing machine was designed as a universal machine for the flexible machining of gears and is used for single-flank rolling tests of bevel gears with evaluation. The image shows the machine in its current condition as a retrofit / modernized version. Podjtncnhepfx Agwogu Technical specifications: - Gear diameter: 450 (300) mm - Axis angle: 90 degrees - Hypoid offset: +/- 60 mm - Footprint approx.: 1.4 x 0.8 x 1.5 m - Machine weight approx.: 1,100 kg Further information on available options and the current purchase price upon request. *All information and schedules are non-binding. Subject to prior sale.