Stroj za oblikovanje

Welter WS 1250

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.650 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS bar loader Fanuc 31iB - 5646 hours Lhodpfjkhnqgox Abbob Country of manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Max bar diameter: 16 mm Max machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Max bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool set 1 Number of stations: 5 Number of driven stations: 3 Driven tool speed: 8,000 rpm Tool set 2 Number of stations: 5 Number of powered stations: 3 Driven tool speed: 8,000 rpm End unit Number of stations: 4 Number of powered stations: 3 Driven tool speed: 8,000 rpm Counter operations Number of stations: 6 Number of driven stations: 6 Driven tool speed: 8,000 rpm Electrical supply Mains voltage: 400V All technical data is provided without obligation and is subject to errors or prior sale.

Stanje: rabljeno, Leto izdelave: 2008, premer struženja: 275 mm, izvrtina vretena: 80 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.345 mm, skupna višina: 2.232 mm, skupna dolžina: 4.339 mm, skupna širina: 2.232 mm, skupna masa: 7.600 kg, Oprema: dokumentacija / priročnik, Mori Seiki NL 2500 SY / 1250 CNC stružnica z Y-osjo, gnanimi orodji in drugo glavno vreteno CNC krmilje MSX-850-III (Mitsubishi 720 BM) Premer struženja 275 / 366 mm Premer izvrtine vretena 80 mm Hitrost vrtenja vretena 4000 min⁻¹ Glavni vretenski motor 18,5/15 kW Pomik X-osi 260 mm Pomik Y-osi +50 / -50 mm Pomik Z-osi: 1345 mm Pomik W-osi (protiprimež od glavnega vretena) 1275 mm Min. indeksiranje C-osi glavnega vretena 0,001° Število orodij v revolverju 12x Število gnanih orodij 12x Orodni konus BMT Podajalnik palic LNS Quick Load Servo III Ljdpfxjxnmzhe Abbohb Vreteno gnana orodja 6000 min⁻¹ Za vsa vprašanja o stroju ali za dogovor o ogledu nas prosimo kontaktirajte po telefonu ali elektronski pošti. Vabimo vas, da si ogledate tudi naše druge oglase in pridobite celovit pregled nad našo zalogo.

Stanje: rabljeno, Technical Details: Maximum balancing weight: 800 kg Balancing body diameter: 1250 mm Balancing speed: 190 - 3600 rpm Bed length: 2600 mm Voltage: 380 V/Hz Drive power: 7.5 kW Machine weight approx.: 1.5 t Machine dimensions approx. LxWxH: 3.5 x 1.7 x 2.0 m Lhsdpeu Upp Tsfx Abbeb Control cabinet dimensions: W: 650 x D: 250 x H: 800 mm Horizontal Balancing Machine The balancing machine is used for measuring and correcting the static and dynamic imbalance of rotors. Maximum balancing body weight 800 kg with equal load distribution, i.e. 400 kg per bearing stand Power transmission via cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Distance between bearing centers min. 125 mm and from shaft end to bearing center max. 2070 mm Measurement speed: 1st gear = 190 – 650 rpm 2nd gear = 400 – 1250 rpm 3rd gear = 700 – 2100 rpm 4th gear = 1200 – 3600 rpm 2 mounting pedestals with manual adjustment along the entire bed Schenk measuring device with digital display and various accessories, e.g. multiple rotor shafts with different diameters and various rotor mounts, please inquire for details! i.D.

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Centre distance: 400–800 mm, spindle speed: 1000–2700 rpm, workpiece diameter: 10–300 mm, grinding wheel diameter: 40–300 mm, swiveling range: -45 to 45°, length: 3000 mm, width: 2500 mm, height: 2275 mm, equipped with Hoffmann oil mist separator (new filter inserts), Faudi gravity band filter system, hydraulic unit, additional grinding head for worm wheel grinding, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, circuit diagrams in paper form, inspection is possible. Lodpfxjrgahxj Abbshb

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Lodjd Nb A Nspfx Abbehb Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 2012, Stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Ogled stroja je možen po dogovoru. Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár Lhedpfeifi D Tox Abbjb

Leto izdelave: 2001, Stanje: rabljeno,

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 50 h, številka stroja/vozila: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3,100 kg Overall dimensions: 230 x 155 x 170 cm Installed power: 13 kVA Customs code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre distance: 650 mm Lhedpfxjw T Sd Tj Abbsb Grinding capacity (SpW+bs): 80 Travel: 700 mm LONGITUDINAL SLIDE Max. stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Feed rate: 50–5,500 mm/min Reversal delay: 0–6 sec Max. table swiveling angles: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max. stroke: 300 mm Rapid traverse: 60 mm Plunge depth in diameter: 3.4 mm Feed rate 1: 0.012–6 mm/min Feed rate 2: 0.012–1.2 mm/min Feed per pulse: 0.001–0.05 mm GRINDING WHEELHEAD Left-hand wheel, external grinding: 400 x 80 x 127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670 / 2,110 rpm Internal grinding attachment for belt-driven spindles, incl. drive unit: 1.5 kW WORKHEAD Swivel range: 0–90° Infinitely variable spindle speed: 30–1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Air grinding load capacity: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Precision adjustment for cylindricity correction: ±40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of generator over 630 mm: 0.003 mm Roundness for air grinding: 0.0003 mm CONNECTION VALUES Max. absorbed power: 13 kVA Max. permissible voltage fluctuation: -15% / +10% Max. permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar Technical specifications provided without obligation and subject to change. Errors and omissions excepted.

Stanje: rabljeno, Leto izdelave: 1983, Max. wheel diameter: 1,800 mm Wheel width: 000 mm Modulus - max.: 18 Axial slide travel: 1,000 mm Distance - table to counterholder arm: 1,800 / 1,467 mm Milling spindle taper: SK 55 Cutter diameter: 300 mm Cutter width: 375 mm Centre distance between spindles: 100 - 1,060 mm Milling slide swivelling range: 240 degrees Table diameter: 1,200 mm Table bore: 300 mm Taper: MK 6 Number of teeth - min.: 9 Milling spindle speed: 20 - 150 rpm Axial feed: 1 - 1,000 mm/min Radial feed: 1 - 300 mm/min Tangential feed: 1 - 225 mm/min Electrical configuration - Voltage/Frequency: 380 V / 50 Hz Control: Sinumerik 3 M Total power requirement: 69 kW Machine weight: approx. 26.5 t Space requirement: approx. 8.0 x 4.0 x 5.6 m Suitable for straight and helical cylindrical gears and worm gears Form milling attachment Lhjdpfjv Saw Iox Abbeb Speed programming Electronic handwheel

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 550-235-ELD, GENERAL CHARACTERISTICS Max. rolling diameter: 41 mm Lodpfxsd Nw Tte Abbohb Max./Min. module range: 1.5 / 0.39 Max. rolling width: 92 mm Max. stroke of the tool holder slide: 760 mm Max. rack length: 610 mm Max./Min. diametral pitch: 20/40-32/64 Serial Number: 550-235-ELD ELECTRICAL CHARACTERISTICS Main motor power: 15 HP