Točkovni varilni stroji nakup rabljenega (140)

Stanje: zelo dobro (rabljeno), DELTATHERM LT 5.5 procesni hladilnik Proizvajalec: DELTATHERM Tip: LT 5.5 Letnik izdelave: 06/2021 Procesni/industrijski hladilnik za hlajenje vode in glikola. Primeren za hlajenje strojev, obdelovalnih strojev, laserskih naprav, preizkusnih stojal, proizvodnih linij in industrijskih aplikacij. Tehnični podatki Hladilna zmogljivost: 6 kW Hladilno sredstvo: voda / glikol Prostornina rezervoarja: 30 litrov Hladilno sredstvo: R407C Količina hladilnega sredstva: 1,8 kg Maks. obratovalni tlak: 28 bar Maks. okoljska temperatura: 42 °C Priključna napetost: 400 / 460 V Frekvenca: 50 / 60 Hz Priključna moč: 5,3 kW Maks. delovni tok: 9,1 A Maks. pred-varovalka: 16 A Razred zaščite: IP54 Zmogljivost črpalke: 20 l/min Tlak črpalke: 3,0 bar Dimenzije (Š x G x V): cca. 600 x 600 x 1296 mm Teža: cca. 140 kg Oprema - Digitalni regulator temperature - Integriran rezervoar za vodo - Zračno hlajen kondenzator - Industrijska izvedba na kolesih - Delovanje z vodo/glikolom - Glavno stikalo na sprednji strani naprave Stanje Rabljena naprava. Prisotne običajne sledi uporabe glede na starost in uporabo. Vidno stanje je razvidno iz slik. Obseg dobave 1x DELTATHERM LT 5.5 procesni hladilnik Dujdpfxezcx Hge Altow Pribor kot na slikah Možna dostava ali pošiljanje s špediterjem. Pridržujemo si pravico do sprememb, napak in vmesne prodaje. Za dodatna vprašanja nas lahko pokličete.

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Power Output: 60 kVA Throat Depth: 680 mm Arm Spacing: 115 / 415 mm Adjustable Jaw Opening: 180 mm Rated Power: 60 kVA Welding Power: 71 kVA Electrode Force: 100 to 600 daN Voltage: 380 V / 50 Hz Air Pressure (min./max.): 6 / 10 bar Dodpfx Aju Nv Emjltjuw Cooling Water Consumption: 12 l/min Machine Weight approx.: 685 + 200 kg Supply Voltage: 380 V / 91 A Nominal Power: 60 kVA Connected Load: 54 kVA Dimensions L-W-H approx., Machine: 1,700 x 850 x 1,750 mm Dimensions L-W-H approx., Aggregate: 900 x 650 x 1,000 mm SPOT WELDING MACHINE - WELDING TRANSFORMER Three-phase DC Welding Machine Application: Spot, projection and series spot welding Maximum Short-Circuit Power: 89 kVA Primary Short-Circuit Current: 135 A Secondary Current = Short-Circuit Current: 25 kA, Welding Current max. 20 kA Electrode Stroke max.: 90 mm; Electrode Force min./max.: 100 daN / 600 daN Max. Stroke Rate at 10 mm stroke: 400 strokes/min Spot Armature: Electrode holder Ø 30 mm, adjustable 180 mm, Arm spacing min./max.: 115 / 415 mm Double Foot Switch Cooling unit, mobile – on wheels for portability, output 1.45 kW, pipe connection R 3/4 inch, refrigerant R22

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Točkovni varilni stroj Proizvajalec: Dalex Tip: SF 8 Tehnični podatki Proizvajalec: Dalex Tip: SF 8 Nazivna moč pri 50% ED: 8 kVA Nazivna primarna napetost: 380 V / 50 Hz Največja varilna moč: 23,7 kVA Največji kratkostični tok: 8,8 kA Količina hladilne vode: 4 l/min Dsdpfjx Ic T Aex Altjuw Sila elektrod: 17 do 390 daN Napetost v prostem teku: 2 do 3,2 V Število stopenj: 4 Izsev: 235 mm Dimenzije: D 750 x Š 350 x V 1100 mm Teža: 77,5 kg Vsi podatki brez garancije. Predstavitev je možna kadarkoli v naši razstavni dvorani.

Stanje: novo, Leto izdelave: 2025, Longitudinal and Transverse Seam Welding Machine (50Hz) --- Rated power at 50% duty cycle: 80 kVA Short-circuit current: approx. 35.9 kA Electrode force: 100–600 daN / double stroke Throat depth: 550 mm Roller electrode Ø longitudinal: 160/125 mm Roller electrode Ø transverse: 160/160 mm Feed rate: 0.63–5.7 m/min (electronic) --- Welding controller: Filius Classic, 128 programs Siemens S7-1200F PLC machine control Prepared for spot and projection welding. --- Including extra options: - 2-channel safety valves - Double foot switch - Adjustment device - Lower arm support - Depressurised lowering of upper assembly - Electronic flow monitor - Electronic electrode force switch - Main switch --- 6 months warranty --- Training and commissioning on request --- Spot welding electrodes & spare parts available from stock Dedpfx Aswqmrzsltjuw --- For further information, please visit our homepage

Stanje: zelo dobro (rabljeno), Maximum welding current: 5 kA Welding force: 45–150 N Closing stroke: pneumatic Welding pressure: pneumatic, secondary adjustment unit with disc spring Force adjustment: proportional valve Electrode design: cylindrical, 6 mm diameter --- Welding control unit: optional (as recommended) --- Equipped with: - Main body with welding heads on aluminum - Modular design - Electrodes top and bottom with feed cylinder - Upper welding head F120K with secondary adjustment unit - Pneumatic valve units - Pneumatic air cooling system for electrodes - Workpiece carrier on dovetail guide for precise positioning with respect to electrodes --- Warranty: 6 months --- Training & commissioning available upon request --- Dujdpotq Ez Eofx Altow Spot welding electrodes & spare parts available from stock --- Further information available on our website

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Rated power at 50% duty cycle: 80 kVA Short-circuit current: 45.4 kA Electrode force: 100–600 daN / single stroke Throat depth: 350 mm --- Control unit: MPS 100mono (8 cycles, 1 program) Pre-installed upper electrode holder Foot switch Adjustment device, Electronic flow monitor 4-step transformer tap switch and main switch. --- Warranty: 6 months --- Training and commissioning available upon request --- Spot welding electrodes and spare parts available from stock --- Dsdpswqmrnjfx Altsuw For further information, please visit our website

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Rated power at 50% duty cycle: 63 kVA Short-circuit current: 26.3 kA Electrode force: 65–390 daN / single stroke Throat depth: 450–750 mm, continuously adjustable --- Control system: MPS 15036 (5-timer, 1 program) --- Includes additional options: - Double foot switch for no-voltage positioning --- 6-month warranty --- Training and commissioning available on request --- Dsdpfxev T Unwo Altsuw Spot welding electrodes and spare parts available from stock --- For further information, please visit our website

Stanje: dober (rabljeno), Točkovni varilni aparat, točkovni varilni stroj, točkovna varilna linija, klešče za točkovno varjenje, uporno točkovni varilni aparat, vzvodni točkovni varilni aparat, valjčni šivni varilni stroj, izboklinski varilni stroj -Proizvajalec: Dalex, pnevmatsko vodno hlajene klešče za točkovno varjenje z upravljalno enoto -Tip: 3238 -Nazivna moč: 16 kVA -Doseg: 370 mm -Upravljalna enota: tip RS 12 -Posamezne komponente: glejte slike -Ponudba/cena: komplet -Transportne mere: 1200/500/V445 mm -Teža: 51 kg Duedpozbqpqefx Altsw

Stanje: zelo dobro (rabljeno), Pneumatically operated, water-cooled 3-phase DC spot welding machine Manufacturer: DALEX Model: PMS 11-4 G3 Throat depth: 650 mm Equipped with a special cylinder for low pressure range from 20–120 daN Rated output at 50% duty cycle: 60 kVA Secondary short-circuit current: 25 kA Dsdpfxeu A Dg Ej Altjuw Secondary open-circuit voltage: 3.68 V With auxiliary control cabinet according to VDE 0100 Main disconnect switch Synchronous welding controller 8036 Weight: 685 kg

Stanje: skoraj kot novo (rabljeno), water-cooled spot welding unit, mobile Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 9.5 kA Secondary open-circuit voltage: 14-18 V Dujdpfxshlhh Aj Altsw with secondary cable for spot welding gun and counter electrode, 3000 mm long Synchronous welding controller with pulse mode T-1050 / 8 Main switch Weight: 300 kg

Stanje: dober (rabljeno), Projection / Projection Welding Machine Manufacturer: DALEX Model: PMS 16-1 Throat Depth: 350 mm Rated Power at 50% Duty Cycle: 250 kVA Secondary Short-Circuit Current: 110 kA Secondary Open-Circuit Voltage: 12.5 V Electrode Force: 340–2,040 daN Djdpfxoubdate Altsuw Equipped with double-stroke cylinder and approach stroke With synchronous welding control 5/36 TT Weight: 988 kg Function-tested Machine is currently being refurbished

Stanje: generalkompletno obnovljen (rabljeno), Pneumatically operated spot welding machine DALEX Type PMS 10-4 Throat depth: 350 mm with EH cylinder Electrode force: 65–390 daN Rated power at 50% duty cycle: 50 kVA Secondary short-circuit current: 34 kA Dujdpfehnh Etox Altjw Secondary open circuit voltage: 2.5–5.0 V with control cabinet mounted according to VDE 0100 Main switch 4-step switch Synchronous welding controller 8033 Activation via foot pedal Weight: 410 kg

Stanje: zelo dobro (rabljeno), water-cooled, manually operated DALEX spot welding tongs Type 3218 Dusdpfxsf Hi A Eo Altew Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN with universal joint suspension and hanging bracket 1 pair of electrode arms, 170 mm throat depth Included: DALEX synchronous welding controller RS 12 Power control via phase angle control Weld time 1-99 cycles, synchronous with connecting cable and 32 A CE plug and main switch

Stanje: zelo dobro (rabljeno), Pneumatically operated, water-cooled spot welding gun for industrial use Model: DALEX 3427 D Rated power at 50% duty cycle: 35 kVA Secondary short-circuit current: 20.5 kA Electrode force: 580 daN Equipped with double-stroke cylinder – long stroke 62 mm – pre-stroke 40 mm Working stroke with adjustable range: 0–22 mm With cardan suspension and mounting bracket 10 m power and control cable Duodpfx Aljgibv Eetjw Electrode arms: 350 mm Arm spacing: 170 mm With synchronous welding control 15036

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Djdpohmvawsfx Altouw Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm with mounted control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg

Stanje: rabljeno, Spot and Projection Welding Machine NIMAK Type BMP 20/150 Spot Welder, Projection Welder Machine No. 81692 Year of manufacture: approx. 1980 Power at 50% duty cycle: 150 kVA Lower clamping plate: 200 x 160 mm Upper clamping plate: 200 x 160 mm Power adjustment: stepless Throat depth: max. 150 mm Electrode force: 200 - 2000 kp, continuously adjustable Operating air pressure: max. 6 bar Connected load: 600 kVA Electrical connection: 380 Volt, 50 Hz - Welding control DTW 4Z 2P - Single spot and series spot welding - Parallel electrode guidance - Water cooled (without cooling unit) - Electric two-hand control desk with emergency stop - Control cabinet with control system mounted on the machine Dodpfx Alev Dxm Sotouw Space requirement (L x W x H): 1000 x 800 x 1800 mm Weight: 900 kg Good condition

Stanje: rabljeno, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Machine No. MA35031332 / 9731122B110 Year of manufacture: 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Throat depth: 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke: max. 80 mm Electrode force: max. 730 daN (at 6 bar), steplessly adjustable Operating air pressure: 0.5 to 6 bar Mains connection: 400 Volt, 50 Hz Connected load: 75 kVA / 63 Amps / cable cross section 3x 16 mm² Possible sheet pairing: max. 5 mm + 5 mm - Welding control: ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Stepless welding current adjustment via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series spot welding - Electrode force steplessly adjustable via air pressure - Water cooled via external water cooling (cooling unit not included) - Electric foot switch - Control cabinet with controller fixed to the machine - PC interface RS 485 - Welding point counter Dodpfx Ajhpf Iyjltouw - Operating instructions for controller, spot welding machine, and wiring diagrams included Space required (W x H x D): 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Stanje: rabljeno, Spot Welding Machine, Projection Welding Machine DALEX Type PL 63 Serial No. N-0051390 Year of Manufacture 2018 Power at 50% Duty Cycle: 63 kVA Power at 100% Duty Cycle: 44.5 kVA Maximum Welding Power: 182 kVA Rated Welding Current: 8.77 kA Throat Depth: 250 - 550 mm Maximum Arm Gap: 150 to (310 mm) Upper Electrode Arm Diameter: 50 mm Dodpoycv Sasfx Alteuw Lower Electrode Arm Diameter: 60 mm Electrode Holder Diameter: 25 mm Electrode Stroke: max. 65 mm Electrode Force: 100 - 600 daN Operating Air Pressure: 1 to 6 bar Electrical Connection: 400 V, 50 Hz Rated Current: 158 A Connected Load: 137 kVA - Thyristor power stage - Welding controller HARMS+WENDE - HWH MPS 10β - 5-phase control, single spot, repeat spot, 8 programs - Electrode force steplessly adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water recirculation unit (water chiller not included) - Electric foot switch - Control cabinet with integrated controller mounted to the machine - Operating manual Required floor space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Stanje: rabljeno, skupna širina: 800 mm, skupna višina: 1.600 mm, skupna dolžina: 1.200 mm, Lastna teža: 500 kg Duedpfxowyktns Altew - Dokumentacija na voljo: Ne - CE certifikat prisoten: Ne - Serijska številka: 4234 - Moč [A]: 450 - Moč [kVA]: 50 - Transportne mere: 1200mm x 800mm x 1600mm (d x š x v) - Transportna teža [kg]: 500kg - Število transportnih paketov: 1 Finančne informacije DDV: Naveden cena je brez DDV DDV/obračun razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: novo, Leto izdelave: 2025, globina grla: 500 mm, – Kapaciteta 35 kVA – Pnevmatsko – Izvlek 500 mm Dusdpfx Alox N Nfustjw – Krmiljenje PX1700ECO – Dokumentacija – 400V

Stanje: dober (rabljeno), *OPIS* Profesionalni komplet ARO AROMASTER II letnik 1997. Točkovni varilni aparat na srednjo frekvenco 1000Hz, dobavljen popolnoma opremljen z obema originalnima orodjema. Znamka ARO Château-du-Loir = svetovna referenca za uporovno varjenje. Robusten stroj, rezervni deli so vedno na voljo. *SESTAVA KOMPLETA* Dodpfozczw Iex Altsuw 1. *Generator AROMASTER II* Koda ZU182000 - Št. 9713221A523 - Letnik 1997 400V trifazni 50Hz - 20,7 kVA pri 100% / 29,3 kVA max Vgrajeno vodno hlajenje - Standard NF A 82-020 2. *X klešče ARO YB200450* Št. 9712211B669 - Letnik 1997 Vodno hlajenje - bakrene roke 450 mm - Pritisk ∼300 daN 3. *Ravno izvlečno pištolo ARO YB200550* Št. 9712211B640 - Letnik 1997 Za varjenje vlečnih čepov Ø2,5 mm *TEHNIČNE LASTNOSTI* Znamka ARO - Izdelano v Franciji Tehnologija Srednja frekvenca 1000 Hz Napajanje 400V trifazni, vsaj 32A Varilni tok približno 10.000 A Varjene debeline Jeklo 0,6 do 2,0 + 2,0 mm Upravljanje Digitalno – nastavitev časa/moči Hlajenje Vodno – vgrajena enota Teža generatorja Pribl. 110 kg – na kolescih *STANJE & GARANCIJA* Komplet v dobrem delujočem stanju. Preizkušen v delavnici Gortina: cikli z obema orodjema OK, pnevmatski pritisk OK, brez puščanja vode, tiristorji OK. Originalna rumena barva ARO. Kablovje in snopi v dobrem stanju. *PREDNOSTI* 1. *2-v-1 komplet*: točkovno varjenje + izvlečno varjenje z inercijo. En sam generator. 2. *Zanesljivost ARO*: industrijska izdelava. Nacionalna poprodajna podpora. 3. *Prihranek*: nov ekvivalenten komplet leta 2026 > 15.000 € brez DDV. 4. *Pripravljen za uporabo*: generator + klešče + pištola, original iz leta 1997. *PODROČJA UPORABE* Tradicionalna avtomobilska karoserija, vozila pred letom 2010, lahka gospodarska vozila, 4x4, restavriranje starodobnikov. Izvlečno popravilo brez lakiranja. Izobraževalni centri.

Stanje: dober (rabljeno), Leto izdelave: 2000, *TEHNIČNE LASTNOSTI* Znamka / Model: ARO MC30CSC Leto: 2000 Serijska številka: 0001122B122 Tip: Fiksni točkovni varilnik z labodjim vratom Napajanje: 400V trifazno 50Hz - 50A Moč: 21 kVA pri 100 % / 78 kVA maks. Maks. varilni tok: 19.000 A Sila pritiska: 358 daN / 358 kg Globina labodjega vratu: 550 mm Razmak rok: 174 do 489 mm Hlajenje: Voda, 5 L/min - 6 bar Krmilnik: digitalno ARO Micro 2X16 III, večparametrski programi Teža: 270 kg Standardi: CE - NF A 82-020 - Izdelano v Franciji *PRILOŽENA OPREMA* - Kompletna naprava na ogrodju - 1 par nameščenih vodno hlajenih bakrenih rok - Digitalna krmilna enota Micro 2X16 III s ključem - Navodila za uporabo ARO *STANJE* Stroj je v odličnem delujočem stanju. Preverjen in testiran v delavnici: varilni cikli OK, naraščanje tlaka OK, brez puščanja vode, tiristorji OK. Originalna rumena barva ARO. Pripravljen za delo. *PREDNOSTI* Duodpfx Aljzczwhjtjw 1. *Moč*: 78 kVA za varjenje jekla do 3+3 mm in nerjavečega jekla do 2+2 mm. 2. *Zanesljivost ARO*: Vodilna blagovna znamka, rezervni deli vedno na voljo. 3. *Sodobno upravljanje*: Micro 2X16 za natančno nastavitev časa/intenzivnosti/sile. 4. *Univerzalnost*: 550 mm labodji vrat za večje obdelovance. *UPORABA* Za proizvodnjo rešetk, košar, kovinskih okvirjev, industrijske pločevinske sestave, ključavničarstvo, industrijsko karoserijo.

Stanje: rabljeno, Točkovni varilni stroj DALEX tip SL 16 - 2 Št. stroja ZZH/N-10183 Leto izdelave ca. 2002 Nazivna moč pri 50 % ED 16 kVA Maksimalna varilna moč 50 kVA Izsev maksimalno 500 mm Moč elektrode maksimalno 17 - 278 daN Elektrodna roka Ø 45 mm Nosilec elektrode Ø 25 mm Razdalja med rokami 150 mm / 300 mm Obratovalni tlak 1-6 bar Duodpfxoy N Dukj Altew Napetost v prostem teku do 3,6 V Priključna moč 37 kVA Priključitev na omrežje 400 V, 50 Hz - Varilna kontrola MPS 200-003 - Proženje varilnega cikla preko električnega nožnega stikala - Hlajenje z vodo Dimenzije (D x Š x V) 1100 x 720 x 1450 mm Teža: 230 kg v zelo dobrem stanju

Stanje: dober (rabljeno), 2 rabljeni vodno hladjeni točkovni varilni stroji Tehnični podatki: Maksimalna varilna moč: 23,7 kVA Nazivna moč pri 50 % ED: 8 kVA Kratkostični tok: 8,8 kA Napetost v stanju brez obremenitve v 4 stopnjah: od 2 do 3,2 V Sila elektrod: 17 – 235 daN Količina hladilne vode: 4 l/min Teža: 85 kg / stroj Cena: 550 EUR neto na stroj Duodpfx Alsy Naq Ijtow Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Nemčija

Leto izdelave: 1970, stanje: rabljeno, Spot welding machine Manufacturer: Dalex Duodpok Tt Hfofx Altow Model: SF 16 Continuous power: 16 kVA at 50% duty cycle