Stroj za točkovno varjenje

DALEX PMS 11-4

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Electrode force: 100 daN, welding power: 255 kVA, rated output: 80 kVA, with DALEX DRF 5.2 cooling system. Hsdpfx Asiknv Eog Tsi

Stanje: novo, Leto izdelave: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Work table: 660x1250 mm Hjdehgihkspfx Ag Tsi Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke. - NC control. - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design allows for quick tool changes without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of accuracy even under high loads. - With the universal tool holder and various tools, you can work with maximum flexibility.

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 1192166605, Tehnični podatki: - Nazivna moč pri 50 % ED: 80 kVA - Največja varilna moč: 211 kVA - Iztegnitev: 350 mm Hodpfx Agoyhnl No Toi - Varilne vrednosti - jekleni pločevini: 8 + 8 mm - Medeninasta pločevina: 4 + 4 mm - Aluminijasta pločevina: 4 + 4 mm - Nastavljiva sila elektrod: 120 - 720 daN - Zahtevan zračni tlak: 6 - 10 bar - Količina hladilne vode: 12 l/min - Krmiljenje: DALEX - Pogon: 400 V - Dimenzije (približno): Š 950 x V 2100 x G 1500 mm - Teža: cca. 600 kg - z: popolnoma električno in pnevmatsko opremo ter ločeno napravo za povratno hlajenje vode.

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Power Output: 60 kVA Throat Depth: 680 mm Arm Spacing: 115 / 415 mm Adjustable Jaw Opening: 180 mm Rated Power: 60 kVA Welding Power: 71 kVA Electrode Force: 100 to 600 daN Voltage: 380 V / 50 Hz Air Pressure (min./max.): 6 / 10 bar Cooling Water Consumption: 12 l/min Machine Weight approx.: 685 + 200 kg Supply Voltage: 380 V / 91 A Nominal Power: 60 kVA Connected Load: 54 kVA Dimensions L-W-H approx., Machine: 1,700 x 850 x 1,750 mm Dimensions L-W-H approx., Aggregate: 900 x 650 x 1,000 mm SPOT WELDING MACHINE - WELDING TRANSFORMER Three-phase DC Welding Machine Application: Spot, projection and series spot welding Maximum Short-Circuit Power: 89 kVA Primary Short-Circuit Current: 135 A Secondary Current = Short-Circuit Current: 25 kA, Welding Current max. 20 kA Electrode Stroke max.: 90 mm; Electrode Force min./max.: 100 daN / 600 daN Hedpfx Aeu Nv Emog Tei Max. Stroke Rate at 10 mm stroke: 400 strokes/min Spot Armature: Electrode holder Ø 30 mm, adjustable 180 mm, Arm spacing min./max.: 115 / 415 mm Double Foot Switch Cooling unit, mobile – on wheels for portability, output 1.45 kW, pipe connection R 3/4 inch, refrigerant R22

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 5211, Offer 24289 Technical Data: - Maximum cutting width: 3060 mm - Maximum cutting capacity at 45 Kp/mm²: 4 mm - Cutting angle: 1.50° - Cutting gap adjustment via adjustment screws - Number of hold-downs: 15 pcs - Strokes per minute: 23 to 43 /min - Front angle gauge - Motorized rear gauge, position-controlled: 15 – 850 mm Hodpfx Ast Ucgaeg Tei - Cutting line illumination - Electric foot switch - Drive: 400 V / 7.5 kW - Space requirement: approx. W 3900 x H 1600 x D 2400 mm - Weight: approx. 4.5 t

Stanje: dober (rabljeno), Srednjefrekvenčni točkovni varilni stroj 1000 Hz, 400 V 50 Hz Proizvajalec: DALEX Tip: PMS 11-4 MF Izpostava: 950 mm z dvojnim hodom cilindra Nazivna moč pri 20 % ED: 180 kVA Sekundarni kratkostični tok: 37 kA Sekundarna napetost v prostem teku: 9 V Sila elektrode: 60–600 daN Teža: 550 kg Hsdevyk Sfspfx Ag Tsi

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm with mounted control cabinet according to VDE 0100 Main switch Hedpfx Aohmvawog Tsi Synchronous welding controller 8033 Weight: 740 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, Used swing beam guillotine shear RAS 86.33 with newly ground upper and lower blades, regularly serviced and barely used. Technical Data: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Back gauge depth: 5-1000 mm Working height: 800 mm Strokes per minute: 30-64 spm Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle gauge: 2,195 mm Hjdpov Tk Exofx Ag Tsi Machine depth with angle gauge: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame throat: 100 mm Tank capacity: 150 l

Stanje: zelo dobro (rabljeno), Pneumatically operated, water-cooled 3-phase DC spot welding machine Manufacturer: DALEX Model: PMS 11-4 G3 Throat depth: 650 mm Equipped with a special cylinder for low pressure range from 20–120 daN Rated output at 50% duty cycle: 60 kVA Secondary short-circuit current: 25 kA Secondary open-circuit voltage: 3.68 V Hedpou A Dg Eefx Ag Tsi With auxiliary control cabinet according to VDE 0100 Main disconnect switch Synchronous welding controller 8036 Weight: 685 kg

Stanje: zelo dobro (rabljeno), globina grla: 1.100 mm, nazivna moč pri 50-odstotnem delovnem ciklu: 96 kVA, tok kratkega stika: 31.500 A, vhodna napetost: 400 V, vrsta hlajenja: voda, skupna masa: 830 kg, Oprema: Na voljo je tipska ploščica, Spot Welding Machine Type PMS 11-4 G3 in 3-Phase Direct Current Version - specially designed for welding aluminium sheets - minimally used, fully inspected and cleaned - everything functions, ready for demonstration - Rated voltage: 400V/50Hz - Rated power: 96 kVA - Welding current: 23 kA - Connection cable cross-section: 10 mm² per phase - Fuse protection: 63A - Throat depth: 1050 mm (!!) - Electrode arm diameter: 60 mm Hedpfx Aeh N Sc Esg Toi - Electrode holder diameter: 30 mm - Electrode force: 600 daN - Stroke: 65+25 mm - Electrode taper: MK2 - Control: MPS 8043/1 by Harms & Wende with current increase and pulses - includes operating manual - 2-step foot switch in accordance with UVV - Main machine switch - Pneumatic maintenance unit - Weight: approx. 830 kg - Complete documentation with wiring diagram, compressed air circuit, and cooling water circuit available - VAT can be shown separately - Delivery from stock Dresden, approx. 4 days within Germany – export may take longer! Commissioning on-site is subject to a fee and will be billed based on actual effort. System is located in Dresden, close to the A17 motorway, and can be inspected and demonstrated by appointment.

Stanje: rabljeno, Leto izdelave: 1999, Sheet width 3000 mm Sheet thickness 3 mm 3 support arms Hedpfer Ngtisx Ag Tei 1 angle gauge Pneumatic hold-down device Back gauge operated manually

Stanje: zelo dobro (rabljeno), Roll seam welding machine in longitudinal seam design Make: DALEX Model: PMS 11-4 Nl Throat depth: 350 mm Hodpetxl Ivefx Ag Toi Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 23 kA Secondary open-circuit voltage: 3.5 - 4.26 V with 2-step switch (High/Low range) Electrode force: 80-600 daN with mounted control cabinet according to VDE 0100 Main disconnect switch Synchronous welding control 8036 Weight: 635 kg Sample photo – Machine is still being refurbished

Stanje: zelo dobro (rabljeno), combined spot and projection welding machine Manufacturer: DALEX Model: PMS 11-4 Version "B" Throat depth: 350 mm Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 59.2 kA Secondary open-circuit voltage: 2.15–4.33 V Electrode force: 190–1140 daN Hodpfx Ajwz Rz Ieg Toi Equipped with 4-step switch Control cabinet mounted according to VDE 0100 With main switch Synchronous welding controller with monitoring function MPS 8043-1 IQ1 Selector switch for operation with dual-hand safety control panel and foot pedal Sample photo Machine currently being overhauled

Stanje: novo, Leto izdelave: 2026, premer spodnjega valja: 220 mm, premer zgornjega valja: 220 mm, premer stranskega valja: 180 mm, premer valja: 220 mm, dolžina valja: 2.070 mm, najv. debelina jeklene pločevine: 10 mm, lastna masa: 4.500 kg, - 4 valjka - Kapacitet 2070 x 10 Hjdpfxjr H Df Is Ag Toi - Kapacitet savijanja 2070 x 8 - Očvrsnuti valjci - Prečnik gornjeg valjka 220 mm - Prečnik donjeg valjka 220 mm - Prečnik bočnog valjka 180 mm - Hidraulični pogon - Digitalni prikaz za levi pomeraj valjka - Digitalni prikaz za pomeranje srednjeg donjeg valjka - Digitalni prikaz za pomeranje desnog valjka - Hidraulični sistem podizanja i spuštanja sa međutim i centralnim valjkom - Hidraulički pokazivač za jednostavno pozicioniranje valjaka - Hidraulični sistem podizanja i spuštanja sa međutim i centralnim valjkom - Gornji valjak je hidraulično otvarajući - Čelična konstrukcija ST-52 - Hidraulični drop-end za lako pozicioniranje valjka - Hidraulični sistem podizanja i spuštanja sa centralnim i bočnim valjcima - Hidraulički balans sistem - Zaštita od prenapona - Dokumentacija - 400V