Točkovni-izbočinski varilni stroj, točkovni varilni stroj, izbočinski varilni stroj, uporovni variln

NIMAK BMP 20/150

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m Psdpsvc Aklofx Agxjgk WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale.

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Pgsdpfx Aet Hw Shjgxjk Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Leto izdelave: 1994, stanje: rabljeno, rd 10 - 75 mm, fl 59 x 60 mm Pjdsrrmispfx Agxegk

Leto izdelave: 2013, stanje: rabljeno, KUKA industrial robot with 6 rotary axes featuring point-to-point positioning. Independent control panel Panel alignment table Barcode scanner mounted on the robot arm Panel feeding system consists of: * 1 motorized roller conveyor for pre-loading panel stacks * 1 motorized roller conveyor * 1 motorized roller conveyor for unloading panel stacks Pjdpfxor Am Sqo Agxsgk Technical specifications: * Model: KR210-2 * Number of axes: 6 * Permissible rated payload: 210 kg * Machine weight: 1,267 kg * Sound level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min./max. length: 300/3,000 mm * Panel dimensions – min./max. width: 180/1,500 mm * Panel dimensions – min./max. thickness: 8/60 mm * Maximum panel weight: 90 kg

Stanje: zelo dobro (rabljeno), Točkovni varilni stroj z enojnim hodnim cilindrom in z elektrodnimi nosilci s prirobnico zgoraj in spodaj. Proizvajalec: DALEX, tip: PMS 14-3. Izpust: 350 mm. Nazivna moč pri 50 % ED: 80 kVA. Sekundarni kratkostični tok: 54,5 kA. Sekundarna prostotečna napetost: 7-14 V. Sila elektrod: 80-1.200 daN. Opremljen z: 8-stopenjskim preklopnikom, glavnim stikalom, priključno krmilno omaro HARMS+WENDE, sinhrono varilno regulacijo MPS 200, 8 varilnih programov, identifikacijsko tablico AEG. Zagon prek nožnega stikala. Podpfx Astuwz Ijgxsgk

Stanje: dober (rabljeno), Leto izdelave: 1995, Offer 24315 Technical Data: - Belt dimension: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° - 30° - Fine adjustment of support via handwheels - Belt speed: 30 m/sec - Contact wheel / grinding roller diameter: Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Required space: approx. W 700 x H 1200 x D 1200 mm - Weight: approx. 225 kg Pedjt Stfhepfx Agxogk - 10 contact grinding rollers approx. diameters: 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Stanje: novo, Leto izdelave: 2025, proizvajalec laserskih virov: TRUMPF, laserska moč: 6.000 W, Oprema: CE označba, TruLaser 1030 Lean Edition Offer Cost-effective machine – Made in Switzerland Lean and powerful laser cutting When it comes to laser cutting, it’s all about value for money: The robust machines of the TruLaser Series 1000 Lean Edition get the job done efficiently. They are economically viable even at low utilization, thanks to their comparatively low investment cost. With 6 kW, they cut all materials up to 25 mm and deliver top quality. Start immediately: The machines are easy to operate, and cutting parameters are already integrated. Material versatility and functionality: Mild steel, stainless steel, aluminium, copper, brass, and FlyLine Technologies and processes for maximum process reliability and robustness Collision protection, nanojoints Easy to operate Qualified cutting data, Cutting Guide, online protective glass monitoring, multi-sheet processing, fully automatic pallet changer Included: TruLaser 1000 Lean Edition with fully automated pallet changer and 6 kW laser Programming software Training & Services: Including e-learning package for programming software Operator training for software Operator training for machine TRUMPF Quality Worldwide, our fast remote service support addresses your needs. Pgedsxn Irbjpfx Agxek For additional technical data, please refer to the datasheet or visit our website. If you have any questions, please feel free to contact us. About TRUMPF: Over our 100-year company history, we have helped to shape many thousands of sheet metal fabrication operations, especially in Germany. We pass on this experience to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, and experts in software, automation, and Smart Factory, you will always receive a customized offer tailored to your requirements. P.S.: We’re also happy to support you in financial matters. With financing, leasing, or pay-per-use models from TRUMPF Financial Services, we are at your side for both financial and business challenges.

Stanje: dober (rabljeno), Leto izdelave: 2008, Stroj je v dobrem delovnem stanju. Pedpfx Aeu Rc Hmogxsgk

Stanje: dober (rabljeno), Leto izdelave: 1982, Širina pločevine: . mm Delovna širina: 4500 mm Debelina pločevine: . mm Maks. rez: 8 mm Razmak med stojali: . mm Električni zadnji prislon Pgodpfeq Dta Iox Agxjk

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), številka stroja/vozila: RES J-BO, ABUS HB Overhead Crane System, Crane Runway Approx. 10x5m (5m Bridge) This crane is available multiple times in different lengths. Sample pictures! Load capacity / lifting capacity: 500 kg - 0.5t Technical specifications of the system: Crane runway made from ABUS HB200 rails System delivered complete: HB rails, rail connectors, trolleys, end plates, brackets/hangers etc. Including 500kg Abus chain hoist – lifting height approx. 4m Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Pgedpou I Uwxofx Agxjk Demag KBK1, KBK2 and KBK3 rails in stock! Other KBK systems with load capacities from 125kg to 1600kg also available. Please inquire about your desired crane runway with required capacity and dimensions without obligation.