Univ. radiji kovinskih tračnih brusilnikov

ALMI AL 100 U

Stanje: rabljeno, Leto izdelave: 2023, Condition: used Year of manufacture: 2023 Stock number: 5543 Delivery time: prompt, subject to prior sale Country of origin: Netherlands Price: €3,100 In stock: 1 Abrasive belt dimensions: 100 x 2,000 mm Tube diameter: 20 - 76.1 mm Manual lever adjustment: 1 Motor power: 3 kW Weight: 190 kg Demonstration machine / as-new condition Net price (RRP €3,798.00) On the AL100U-01 model, operation is performed using a lever. With the AL 100U you can notch material from Ø 20 to Ø 76.1 mm. The support cross and carriage with rotatable clamp are steplessly adjustable, allowing any tube profile to be notched at any desired angle between 30° and 90°. The ALMI AL100U-01 grinds square, rectangular, and round tubes with various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the abrasive belt is now even easier using the supplied hex key. The abrasive belt can be quickly tensioned and changing the grinding rollers takes only a few seconds. All tube notchers are equipped with a deburring table. Includes: 5 pcs. abrasive belts, 1 pc. grinding roller Ø 42.4 mm. Hodpfoynmwqsx Ag Tji

Stanje: rabljeno, Drilling capacity in steel (diameter): 40 mm Throat depth: 325 mm Quill stroke: 170 mm Table clamping surface: 730 x 590 mm Spindle speed: 130 - 1200 rpm Feed rate: 0.09 - 0.16 - 0.28 mm/rev Tool holder: Morse Taper 4 (MK 4) Total power requirement: 1.8 kW Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.2 x 0.8 x 2.15 m Drilling machine equipped with: Feed mechanism 2 gearbox speeds Forward/reverse operation Foot switch Machine lamp Hjdpfx Aewn T A Uog Tei

Stanje: novo, Condition: new Hodpfowir Dmsx Ag Tei Delivery time: approx. 2 weeks from order Country of origin: Netherlands Price: €4,646 Grinding belt dimensions: 100 x 2,000 mm Tube diameter: 20 – 76.1 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 3 kW Weight: 220 kg The AL100U-02 model can be operated either with two handwheels or a lever; both options are available on the machine. With the AL100U-02, you can notch material from Ø20 up to Ø76 mm. The support cross and the carriage with a rotating clamp are infinitely adjustable. This allows all tube profiles to be notched at any desired angle between 30° and 90°. The ALMI AL100U-02 processes square, rectangular, and round tubes of various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, adjusting the sanding belt with the supplied hex key is now even easier. The sanding belt can be quickly tensioned, and changing the grinding rollers is completed within seconds. All tube notchers come equipped with a deburring table as standard. Includes: 5 sanding belts, 1 grinding roller Ø42.4 mm

Stanje: rabljeno, Leto izdelave: 2019, Condition: Used Year of manufacture: 2019 Stock number: 5505 Delivery time: Prompt, subject to prior sale Country of origin: Netherlands Price: €2,670 In stock: 1 Belt dimensions: 100 x 2,000 mm Pipe diameter: 20 – 76.1 mm Hand lever adjustment: 1 Motor power: 3 kW Weight: 190 kg DEMONSTRATION MACHINE / LIKE NEW CONDITION For the AL100U-01 model, operation is carried out using a manual lever. With the AL 100U, you can grind material from Ø 20 up to Ø 76.1. The support cross and the carriage with rotating clamp are steplessly adjustable, allowing all pipe profiles to be ground at any desired angle from 30° to 90°. Hedewiqwlopfx Ag Tei The ALMI AL100U-01 grinds square, rectangular, and round pipes with various wall thicknesses and is suitable for all standard materials. Thanks to the ALMI belt tensioning system, adjusting the sanding belt with the supplied hex key is now even easier. The sanding belt is quickly tensioned and changing the sanding rollers is completed in just a few seconds. All pipe notchers are equipped with a deburring table. Includes: 5 pcs. sanding belts, 1 pc. sanding roller Ø 42.4 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, We offer for sale a complete SCHLATTER multi-point automatic steel wire welding line. Hedpetvpiljfx Ag Tsi We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straightening and cutting machines) are also available. Additionally, we have a wide selection of individual spot welders for steel wires.

Stanje: dober (rabljeno), Leto izdelave: 1998, Offer 24339 Technical Specifications: - Belt dimensions: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° to 30° - Fine adjustment of support via hand lever - Belt speed: 30 m/sec - Contact wheel / grinding roller for approx. Ø 42 mm Hsdpfst Uzxnjx Ag Tei - Drive: 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers: 33.7, 42, 48 mm

Stanje: dober (rabljeno), Leto izdelave: 1996, Offer 24337 Technical Data: - Belt dimensions: 2000 x 100 mm - Surface grinding aperture: 400 x 100 mm - Adjustable support vise: 90° to 30° - Fine adjustment of support via hand lever - Belt speed: 30 m/sec - Contact wheel / grinding roller for approx. Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Space requirement approx.: W 700 x H 1200 x D 1200 mm Hedpfxsvbfh Ro Ag Tji - Weight approx.: 225 kg - Various contact rollers

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Komorna elektrostatika peč za prašno lakiranje: dolžina: 500 cm, širina: 250 cm, višina: 300 cm - Kabina za prašno lakiranje s filtrom: dolžina: 300 cm, širina: 220 cm, višina: 270 cm Hedpsv Nvndjfx Ag Tei - Elektrostatika oprema za prašno lakiranje: model: HMK MULTICOLOR, način uporabe: ročni

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Hsdpfx Agsfxyhfe Tji Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Leto izdelave: 2008, Stanje: dober (rabljeno), številka stroja/vozila: 431808, Ref. No. 18177 Hydraulic Flat, Profile, and Bar Shear with Notching Attachment and Punching Unit Technical Data: - Flat Bar Shear cuts up to 375 x 10 mm or 220 x 20 mm - Profile Steel Shear cuts angle steel (L-profile) at 90° up to 130 x 13 mm - Bar Shear cuts round bar up to 45 mm, square bar up to 45 mm - Notching Attachment with square notching tool 100 x 42 x 10 mm - Punching Unit – Punching force: 600 kN – with stop table – Throat depth: 300 mm – Punches holes in steel up to 28 mm Ø in 15 mm material, or 34 mm Ø in 12 mm material - Manual length stop - Drive: 400 V / 4 kW - Space requirements approx. W 600 x H 1550 x D 1500 mm Hjdpfx Asmidyieg Tji - Weight approx. 1300 kg