Univ. radiji kovinskih tračnih brusilnikov

GRIT GR 75-2H

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. Djdpfx Ajfxyhfefnocd The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: rabljeno, Contact grinding wheel dimensions: 50 x 100 Ø mm Dodpfx Aeb Tcv Hefnocd Drive motor: 380 V, 0.7 kW Space requirement: 650 x 550 x 1050 mm

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting Dedpfxjlgvkie Afnjcd - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: novo, Special promotion price for stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt Grinder: Bernardo Type/Model: MS 75 x 2000 S Condition: New Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact wheel Ø x width: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction port: 100 mm Motor output (S1 100%): 3.0 kW Motor input power (S6 40%): 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Features: - High grinding performance thanks to high belt speed Dcedpfxsfnr Aie Afnjd - Quick adjustment for horizontal and inclined positions - Continuous flat grinding surface for optimal processing of long workpieces - Constant belt tension via spring-loaded tensioning device - Versatile use for grinding edges, surfaces, and for cylindrical grinding - Quick-release system included for fast belt changes - Easy adjustment of parallel belt tracking via adjustment screw - Graphite coating on the flat grinding surface improves the sliding properties of the sanding belt Scope of delivery: - Abrasive belt K 80 - Flip-up protective shield - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate emergency stop button - Base frame

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 732335740, Mobile jaw crusher on crawler tracks The Diablo crusher is the most advanced machine in its 30-ton category. Equipped with next-generation control and operating systems, it is easy to use, user-friendly, and environmentally sustainable. Dsdpfx Aehd I Sxsfnjcd The HCS control system (Hydraulic Crushing System) actively supports the machine’s automatic operation, ensuring maximum profitability in terms of maintenance costs and productivity, making it truly unique. Structural reinforcement between the frame and the crusher provides the machine with maximum robustness against stress. The special design of the supporting structure ensures excellent access to all machine components during maintenance. Production capacity: approx. 220 t/h Patented HCS system Proportional distributor with “load sensing” for system optimization and up to 30% reduction in fuel consumption Optional pre-screen Hydraulically adjustable gap setting, also during crushing operation Quick-locking system with wedges and folding cylinders Discharge height: 3000 mm Dust extraction Refueling pump Magnetic separator Warranty: 1 year or up to max. operating hours from commissioning of the unit Technical data: Jaw crusher: 1000 x 600 mm Crusher gap setting: 40 to 170 mm Feed hopper: 4 m³ – 1820 x 3700 mm Grizzly feeder version: 900 x 3300 mm Main conveyor: 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 HP / 60 kW, Emission Stage V Control panel Track undercarriage: 400 x 2920 mm Weight: kg Transport length: 12,500 mm Transport width: 2,530 mm Transport height: 3,150 mm Further information Intended use: Construction General condition: Very good Technical condition: Very good Visual condition: Very good Delivery terms: EXW

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 970015, Load capacity with faceplate in horizontal position: 10 t Load capacity with faceplate in vertical position and center of gravity at 300 mm: 10 t Load capacity with faceplate in vertical position and center of gravity at 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically infinitely variable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Dcodpfjcblc Sox Afned Swivel time for full swivel range upwards: 140 s Swivel time for full swivel range downwards: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Stanje: novo, Leto izdelave: 2026, NEW TO THE MARKET! Universal belt grinder with extensive standard equipment and the ability to operate both vertically and horizontally. - Easy and quick belt change - Simple and fast grinding angle adjustment - Rapid head position change between vertical and horizontal orientation Machine Features Universal belt grinder equipped with a wide range of standard accessories, suitable for both vertical and horizontal operation. - Easy and quick belt change - Fast and simple adjustment of grinding angle - Quick head position adjustment between vertical and horizontal Technical Specification - Stepless speed control with RPM indicator - 550W brushless motor - Vibration absorber dampens operation and regulates belt tension and contact - Aluminum drive wheel - Aluminum, ball-bearing guide rollers - Belt guards compliant with CE standards - Steel supports for precise pressing of the workpiece to the belt Dcsdpfx Afsvu Ukhonsd Technical Data - Power supply: 230V - Motor: 0.55 kW - Belt speed: 12–34 m/s - Belt dimension: 50x1000 mm - Weight: 20 kg - Dimensions: 440x340x420 mm

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting area at 45°: flat 135 x 185 - 145 x 150 mm Cutting area at 45°: round 150 mm Cutting area at 45°: square 145 mm Cutting area at 60°: flat 63 x 107 - 69 x 90 mm Cutting area at 60°: round 70 mm Cutting area at 60°: square 70 mm Cutting area at 90°: flat 240 x 160 - 250 x 110 mm Cutting area at 90°: round 225 mm Cutting area at 90°: square 185 mm Djdjlb I Daopfx Afnocd Total power requirement: 0.75 / 1.1 kW Machine weight: approx. 200 kg Required space: approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling saw head descent - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil bath gearbox - Saw bow, vice, and mitre assembly made from cast steel - Steel saw blade guide with ball bearings - Quick-release vice - Front-integrated lever for mitre angle lock - Coolant pump with aluminium body - Large handwheel for easy blade tensioning - Pressure gauge for blade tension display (600-1000 kg/cm³) - Emergency stop safety switch - Swarf brush for saw blade cleaning STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for series cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 70.000 h, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: Mitsubishi, laserske ure: 14.000 h, laserska moč: 4.000 W, valovna dolžina laserja: 10.600 nm, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina pločevine iz nerjavečega jekla: 20 mm, maks. debelina aluminijaste pločevine: 20 mm, dolžina mize: 3.050 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, potovalna razdalja osi X: 3.020 mm, pomik osi Y: 1.520 mm, pomik po osi Z: 50 mm, moč: 4 kW (5,44 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, priključek za stisnjen zrak: 8 letvica, skupna masa: 12.000 kg, skupna dolžina: 12.000 mm, skupna širina: 3.000 mm, skupna višina: 2.500 mm, leto zadnje generalne obnove: 2023, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Machine: AMADA LC-3015 X1 NT Laser Resonator: ML40CFX / 4 kW Exhaust System: Herding – Delta Comp 1500-6/9 SB Chiller: Riedel – PC 1001.1MS5.I Operating Hours: see photo Dsdsu Stk Eepfx Afnocd Last maintenance: 10/2023

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 472684923, Gasparin Jaw Crusher GI107CV Vesuvio, Mobile jaw crusher on crawler chassis The mobile crusher GI107 VESUVIO stands for versatility and can be configured in two different versions. Equipped with a grizzly vibrating feeder (GI107C), it is suitable for traditional applications; with a vibrating feeder combined with a pre-screen, the machine (GI107CV) is designed for demanding operations involving high fines content and high material moisture. With standard equipment including the patented HCS system (Hydraulic Crushing System), VESUVIO provides the best solution for both professionals and rental operators. Production capacity: approx. 320 t/h Patented HCS system Proportional distributor with "load sensing" for system optimization and fuel consumption reduction by approx. 30% Jaw gap hydraulically adjustable even during crushing operation Rapid locking system with wedges and folding cylinders Discharge height 3000 mm Dust extraction Fuel pump Magnetic separator Warranty: 1 year or up to max. operating hours from initial commissioning of the plant Technical Data: Jaw crusher: 1020 x 700 mm Adjustable crusher gap: 45 to 180 mm Dcsdpfjhd I Rzsx Afnjd Feed hopper: 5 m³ – 2000 x 3960 mm Two-deck vibrating screen: 1020 x 1800 mm Main conveyor belt: 800 x 9600 mm 4-cylinder diesel engine, constant speed, 82 hp / 60 kW, EU Stage V Control panel Crawler chassis: 400 x 3310 mm Weight: kg [to be specified] Transport length: 12,900 mm Transport width: 2,530 mm Transport height: 3,200 mm Further information Intended use: construction Overall condition: very good Technical condition: very good Visual condition: very good