Točkovni varilni stroj, grbasti varilni stroj, AC uporovni varilni stroj

DALEX PL 63

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Rated power at 50% duty cycle: 63 kVA Short-circuit current: 26.3 kA Electrode force: 65–390 daN / single stroke Throat depth: 450–750 mm, continuously adjustable --- Control system: MPS 15036 (5-timer, 1 program) --- Includes additional options: - Double foot switch for no-voltage positioning --- 6-month warranty --- Training and commissioning available on request Kedpfxov T Unws Abxedn --- Spot welding electrodes and spare parts available from stock --- For further information, please visit our website

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 346 h, število osi: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details. Kdodpfxeym T Itj Abxen • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max. turning diameter: 508 mm • Max. turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Max. main spindle speed: 4,500 rpm • Max. sub-spindle speed: 6,000 rpm • Synchronizing spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar pass-through: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Maximum motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interruption capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included; swiveling holders are not included.

Stanje: rabljeno, Détails techniques : Puissance électrique : 100 kVA Profondeur de col de cygne : 600 mm Entraxe des bras : 600 mm Commande : Bus de terrain programmable Bosch Ouverture des pinces réglable : 240 - 540 mm Interface : RS 485 Tension de soudage : 500 V Kedpfju Nv Eaox Abxodn Tension d’alimentation : 380 V Pression d’air : 6 bar Consommation d’eau de refroidissement : 14 l/min Poids de la machine env. : 770 kg Encombrement env. : 1,5 x 0,95 x 2,1 m SOUDAGE PAR POINTS – TRANSFORMATEUR DE SOUDAGE Application : Soudage par points, par bosses et en série 1 - 1000 Hz Force de l’électrode par vérin : 11 daN Redresseur moyenne fréquence PSI 6000 avec fonction de commande intégrée (alimentation secteur 50/60 Hz) Bras d’électrode Ø 35 mm Réglage du support d’électrode : 200 mm (manuel) Entraxe des bras min. 240 mm, max. 540 mm (réglage manuel) Commande par pupitre Rexroth IntraControl VCP05 et pédale Groupe frigorifique externe pour eau de refroidissement marque Rittal SK3320.609 Incl. électrodes de rechange (refroidies à l’eau)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BMP 6-5, globina grla: 250 mm, skupna masa: 650 kg, razmak med rokam: 590 mm, nazivna (navidezna) moč: 80 kVA, Proizvajalec: Nimak Ksdpfx Abjv N U Tljxedn Tip: BMP 6-5/80 Naziv: Grbasta varilna naprava Nazivna moč: 80 kVA Fmax.: 1100 daN Iztegnjenost: 250 mm Odprtina: 350 - 590 mm Teža brez električne omare: 650 kg

Stanje: rabljeno, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Machine No. MA35031332 / 9731122B110 Year of manufacture: 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Throat depth: 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke: max. 80 mm Electrode force: max. 730 daN (at 6 bar), steplessly adjustable Operating air pressure: 0.5 to 6 bar Mains connection: 400 Volt, 50 Hz Connected load: 75 kVA / 63 Amps / cable cross section 3x 16 mm² Possible sheet pairing: max. 5 mm + 5 mm - Welding control: ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) Kdsdjhpf Iyepfx Abxsn - Stepless welding current adjustment via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series spot welding - Electrode force steplessly adjustable via air pressure - Water cooled via external water cooling (cooling unit not included) - Electric foot switch - Control cabinet with controller fixed to the machine - PC interface RS 485 - Welding point counter - Operating instructions for controller, spot welding machine, and wiring diagrams included Space required (W x H x D): 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Stanje: novo, Leto izdelave: 2026, Machine type: EVP 30 Manufacturer: ERBA Power kW: 0.95 Total volume: 30 l Description: The EVP 30 vibratory finishing machine from ERBA is ideal for processing small workpieces or as an entry-level and pilot system. It features a flat-bottomed process container without internal separation. The emptying or separation is carried out via bottom discharge (manual or pneumatic). The motor speed can be infinitely adjusted via frequency converter (optional). The system can optionally be equipped with a fully automatic PLC control. ERBA vibratory finishing systems are characterized by their durability and long service life, which is based, among other things, on the hot-cast polyurethane lining of the process container. As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for your optimum process results. Prices are net plus the currently applicable statutory VAT and shipping costs. The pictures may show the system including accessories, which are optionally available and subject to additional costs. Kdjdpfx Abeyq Ripexen If you are interested, we look forward to your inquiry. We will be happy to advise you without obligation. The European Commission provides a platform for extrajudicial online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations take place via telecommunication (e-mail, telephone, messaging portal). In the first step, we will send you a non-binding offer, in which we will also inform you of our general terms and conditions, legal notice and the right of withdrawal, before any purchase or contract is concluded.

Stanje: rabljeno, Leto izdelave: 1992, Tlak 200 t Razmik med stojali 1910 mm Hod 600 mm Razdalja med mizo in batom, največji hod zgoraj, nastavitev zgoraj 800 mm Površina mize 1900 x 1150 mm Tlačna sila izvlečnega blazine v mizi 80 t Kodpfx Aevuui Robxodn Hod izvlečnega blazine v mizi 300 mm Površina izvlečnega blazine 1500 x 950 mm Višina mize nad tlemi 800 mm Stranski prehod med stojali 1000 mm Površina bata 1900 x 1100 mm Sila povratka 36 t Hitrost izhoda 400 mm/s Hitrost vstopa 170 mm/s Delovna hitrost 30,5 mm/s Količina olja 1500 l Višina nad tlemi 4,85 m Višina pod tlemi 2,6 m Pogonska moč 45,0 kW Teža 38,0 t Potrebni prostor (ŠxGxV) 3,05 x 2,8 x 5,55 m Leto izdelave 1975 - modernizacija 1992 z oljnohidravličnim pogonom, hidravličnim izvlečnim blazinam v mizi, zaklep bata

Stanje: novo, Leto izdelave: 2025, Rated power at 50% duty cycle: 80 kVA Short-circuit current: 35 kA Electrode force: 100–600 daN / single stroke Throat depth: 350–650 mm, infinitely adjustable --- Control system: MPS 10beta (5 time settings, 8 programs) --- Warranty: 12 months Kodjxl Uudjpfx Abxsdn --- Training and commissioning available upon request --- Spot welding electrodes and spare parts available from stock --- For further information, visit our website: wahlenmeier.de

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 00026, skupna masa: 400 kg, Specifications: 8 bar 24 V 80 kN 3 K 150 E The Arnold & Shinjo / Multipower Farger & Joosten C-frame press is a powerful and versatile hydropneumatic riveting press, ideally suited for efficient and precise joining of components. Thanks to its robust design and reliable hydraulic technology, it delivers high force transmission for various riveting tasks, making it a valuable solution for production and assembly applications. The press stands out for its user-friendly operation and flexibility, allowing it to be used in a wide range of manufacturing processes. Kjdpfswrp Iusx Abxjdn

Stanje: dober (rabljeno), Točkovni varilni aparat, stroj za točkovno varjenje, naprava za točkovno varjenje, klešče za točkovno varjenje, aparat za uporovno točkovno varjenje, vzvodni stroj za točkovno varjenje, stroj za valjčno šivno varjenje, grebenasta varilna naprava -Proizvajalec: Dalex, stroj za točkovno in grebenasto varjenje z valjčno mizo -Tip: PMS 14-4 -Nazivna moč: 200 kVA -Doseg roke: 740 mm -Upravljanje: s stopalko Kdodpfx Aey Au Eyebxsn -Posamezne komponente: glej slike -Izročitev/cena: komplet -Dimenzije: Stroj 2120/890/H1680 mm / Miza 2730/800H1055 mm -Teža: 966 kg / 70 kg