Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1113, skupna širina: 1.170 mm, skupna višina: 1.510 mm, skupna dolžina: 1.850 mm, premer briketa: 60 mm, skupna masa: 770 kg, Never used = As-new machine condition Year of manufacture: 2024 Operating hours: 6! - Option for water or oil cooling, suitable for larger or multi-shift operations (price stated without cooling) - Sufficiently large feed hopper ensures extended work cycles without frequent material refilling Technical specifications: Motor power: 7.5 kW Briquette output: 40–100 kg/h depending on material Briquette diameter: 60 mm Briquette length max 60 mm (so-called endless briquette) Pressing pressure: 900 kg/cm² Hopper diameter: 1000 mm Dimensions: 1850 x 1170 x 1510 mm Weight: 770 kg Features: Hydraulic unit: 7 pressing cycles/min LCD Siemens touchscreen programmable control panel Manual or fully automatic operation – PLC control – Siemens Dual pressure gauge for improved pressure monitoring Briquetted material level sensor Oil level sensor Preheating unit for operation in cold environments Inspection window Iedoyh Nfhjpfx Adkjhw Option for integration into existing production lines Voltage: 400V – 50 Hz Moisture content of processed material must not exceed 18%

Stanje: rabljeno, Različne vpenjalne dolžine: od 20 do 200 cm Isdpfx Aox E T Ufjdkehw Serija približno 70 vijakastih spon različnih proizvajalcev, kot so Bessey in drugi, s stabilnim jeklenim vozičkom.

Stanje: rabljeno, Največja širina obdelovanca: 4.250 mm Največja višina obdelovanca: 2.400 mm Ročno upravljanje Hidravlična okvirna stiskalnica Schafberger & Sprödhuber z ročnim električnim nastavljanjem. Ijdpfx Asw I Dbmsdkjhw

Stanje: rabljeno, Površina stiskanja: pribl. 2.800 x 1.000 mm Stiskalni cilindri: 6 Masivna pnevmatska lepilna stiskalnica z perforirano pločevino za prilagodljivo razporeditev stiskalnih cilindrov. Ihodpfxjviwqmj Adksw En cilindri brez pritisne čeveljčke.

Stanje: rabljeno, Dolžina 2.300 mm Širina 800 mm Višina 2.700 mm Ihedpfx Adjt H Tuxoksw Maksimalna velikost obdelovanca: 1.300 x 700 x 1.450 mm Pnevmatska stiskalnica za ohišja ali lepilna stiskalnica za prešanje pohištvenih ohišij ali podobnih kosov.

Stanje: rabljeno, Priključek: pnevmatičen, 6 bar Teža: 250 kg Iodpfxolf H Uhj Adkshw Naprava za končno montažo pokopaliških križev.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling a carcass press for furniture assembly, RAMARCH PN31. Year of manufacture: 1998. Material size: 2500 x 1300 x 600 mm Electropneumatic operation. Ihsdpfx Adsh Iahgekjw Manufacturer: RAMARCH, Spain (now DYNMA). Very good condition. Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, I am selling a carcass press for furniture assembly, RAMARCH PN31. Year of manufacture: 2002. Material size: 2500 x 1300 x 600 mm Electropneumatic operation. Manufacturer: RAMARCH, Spain (now DYNMA). Very good condition. Available immediately. Iodpfx Aoh Iahcodkehw

Stanje: dober (rabljeno), For sale: pneumatic press. Ihjdpfx Ajun U Uiedkow

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.070 mm, skupna dolžina: 2.000 mm, skupna širina: 1.200 mm, skupna masa: 600 kg, Comafer K100 output 100kg/h. Produces 6mm pellets from wood chips with 8-12% moisture content. Material is ground by a 5.5kW mill to the appropriate particle size and then fed by an auger into a 7.5kW ring die pellet press where it is compressed. The process is fully automatic and controlled from an electric control box. Very high pellet quality. Isdpfx Aow Hnglodkohw

Leto izdelave: 2000, stanje: rabljeno, 2000 M.A.C. SN-OL 1230x650-10T Preša za upogibanje lesa Delovne dimenzije: 1230 x 650 mm Tlačna moč: 10 ton Ihodpjychqhjfx Adksw Moč motorja: 5,5 kW

Stanje: rabljeno, skupna širina: 1.300 mm, skupna dolžina: 2.600 mm, skupna višina: 2.000 mm, skupna masa: 2.800 kg, stiskalna sila: 65 t, širina odpiranja: 300 mm, premer cilindra: 80 mm, transportna širina: 1.300 mm, potrebna širina: 1.300 mm, zahteva za prostor dolžina: 2.600 mm, transportna višina: 2.000 mm, transportna dolžina: 2.600 mm, potrebna višina: 2.000 mm, lastna masa: 2.800 kg, širina plošče: 1.100 mm, širina mize: 1.100 mm, dolžina mize: 2.200 mm, Furnierpresse Ott JU 60 Polovna Grejne ploče 2200 x 1100 mm (dužina x širina) Ploče zlatno eloksirane, u veoma dobrom stanju Grejanje električno, 2 x 6 kW 4 hidraulična cilindra, prečnik svakog po 80 mm Ukupan pritisak prese: 65 tona Specifični pritisak prese pri punom opterećenju: 2,7 kg/cm2 Širina otvora: 300 mm Taster komanda za zatvaranje – otvaranje – stop Sigurnosni kabal za hitno zaustavljanje duž cele prese Transportne dimenzije cca. 2600 x 1300 x 2000 mm (dužina x širina x visina) Težina cca. 2800 kg Radi izbegavanja mogućih nesporazuma, preporučuje se i moguć je pregled mašine na licu mesta uz prethodnu najavu Prodaja u viđenom stanju Tehničke specifikacije, opis stanja, godina proizvodnje i obim isporuke prema prospektu proizvođača ili prethodnog vlasnika, bez garancije Zadržavamo pravo međuprodaje Za polovne mašine isključuje se svaka garancija, važi: "kupljeno u viđenom stanju" Ihodpfeyfw D Asx Adkew Uslovi plaćanja: cene su bez PDV-a, plaćanje pre preuzimanja ili slanja Uslovi isporuke: franko skladište

Stanje: novo, Bernardo lisovací stoj HVS 3000 Univerzální použití, snadná a rychlá obsluha jsou charakteristické pro lisovací stoj HVS 3000, který je proto nepostradatelný pro každodenní použití v řemeslných dílnách a truhlárnách. Technická specifikace Pracovní délka: 2800 mm Pracovní výška: 1460 mm Zdvih válce: 65 mm Lisovací síla: 2500 kg Ihodpfoxrnu Dox Adkow Rozteč otvorů vertikálně: 50 mm Celková délka: 3000 mm Celková výška: 2070 mm Hloubka rámu: 925 mm Hmotnost: cca 198 kg Vlastnosti • Pro různé úkoly, jako např. lepení masivního dřeva, výroba dveří, lepení hran apod. • Robustní lis s pevnou ocelovou konstrukcí • Rychlejší a efektivnější lepení ve srovnání se šroubovými svěrkami • Standardně se dodává se 4 nastavitelnými lisovacími nosníky a lisovací konzolou • Bez zaklínění lisovacích válců díky dvojitému pružinovému vedení Dodávka obsahuje • 4 posuvné lisovací nosníky, každý s vertikálním ručním hydraulickým válcem a protikusem • 1 posuvnou a nastavitelnou lisovací konzolu

Stanje: novo, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether for furniture or door production, edge or frame gluing, the high pressing force of 2,000 kg per cylinder and precise angle pressing of large-format parts allow all tasks to be accomplished with ease. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Total length: 3,250 mm Total height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features • Versatile use, e.g., for frame, window, and door production • Sturdy frame press with solid steel construction • Central hydraulic cylinder control, including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders serially equipped with rocker plates Ihedpfx Aexrnvbedkow Scope of delivery • 4 movable pressure beams, each with a vertical hydraulic cylinder and counter bracket • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Stanje: rabljeno, Leto izdelave: 2004, Pnevmatska tiskalnica za tapetništvo, znamka Camam, leto 2004 (CE), rabljena Mere in teža: 90 x 60 x V 200 cm. Teža 200 kg (1 kos) Ihodpfxeyccuhj Adksw

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Linija za pelete in naprava za pakiranje – možnost ogleda - Skladiščni silos za surovine 4 m³ z izpustom v sekljalnik, primeren za lesne sekance velikosti manj ali enako G30 + transportni trak - Sekljalnik 22,5 kW z zvočno izoliranim kabinom - Skladiščni silos 4 m³ z izhodnim transportnim trakom LP-serije - Peletirka LP22 (integrirano centralno mazanje, vodna črpalka in nadzor temperature zagotavljajo najvišjo raven uporabniku prijaznega delovanja) - Sito z transportnim trakom za LP22 (vključno s senzorjem nivoja za BigBag z vrtljivo nosilno konzolo in senzorskim kablom za priklop na peletirko LP22) - Nosilec za BigBag Vario 1,5 m³ - Pakirna naprava, primerna za sistem Vario BigBag Ihodpfx Adew Hrg Nokew Za več informacij nas prosimo kontaktirajte.

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Ijdpogl Nlmjfx Adkohw Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 0x0x0 mm Teža 0 kg Iodpsvz Ev Iofx Adkehw Skupna potrebna moč 3 kW Stiskalnica za lepljenje blokov BLP 3000-300 - Delovna površina: dolžina 3000 mm, višina 1000 mm - Debelina lepljenja 150–300 mm - Število tlačnih cilindrov: 6 - Tip cilindra: Ø 100 x 120 mm - Neprekinjena tlačna plošča 3000 mm - Največja sila na tlačni valj: 136 kN - Specifični pritisk pri 300 mm: 7,5 kg/cm² - Največji pritisk: 160 bar - Moč hidravlične črpalke: 3,0 kW - Pretok črpalke: 10 l/min

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 0x0x0 mm Teža 0 kg Skupna potrebna moč 3 kW Stiskalnica za lepljenje blokov BLP 3000-300-6 - Delovna površina: dolžina 3000 mm, višina 1000 mm - Debelina lepljenja 150 – 300 mm - Število tlačnih valjev 6 - Tip valja Ø 100 x 120 mm - S 6 pritrdilnimi ploščami na valj - Največja sila na tlačni valj 136 kN - Specifičen tlak pri 300 mm 7,5 kg/cm² - Največji tlak 160 bar - Moč hidravlične črpalke 3,0 kW Isdsvz Etgjpfx Adkohw - Pretok črpalke 10 l/min - Ročno upravljanje hidravličnega ventila

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, working width 3000 mm working height 2500 mm year of manufacture 1997 motor power 7.5 kW weight 2500 kg power supply 400 V top pressure beam side cylinders and gear mechanisms adjustable from control panel time settings for closing individual sections emergency stop switch - pull cord CE marking Ihedpfx Adeyk Snyjksw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, KATALOGŠKA ŠTEVILKA 7852 Tehnični podatki: - pritisna sila: hidravlična Ihodpsx Hhzvjfx Adkjw - oblika briketa: okrogla - premer briketa: 60 mm - premer rezervoarja: 1000 mm - zmogljivost: cca 110 kg/h - samodejno delovanje stroja - hladilnik olja - motor: 7,5 kW - dimenzije (d/š/v): 1800x1100x1500 mm - teža: 730 kg PREDNOSTI – ni prebarvan – italijanska proizvodnja – rabljena briketirka – originalna dokumentacija DTR + CE – odlično stanje, leto izdelave 2021 Neto cena: 46.900 PLN Neto cena: 11.170 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih tečajnih nihanj se cena lahko spremeni)

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Ihjdpfx Aod Nm Siodksw Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Isdpfxjxfwdj Adkehw Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: dober (rabljeno), Leto izdelave: 2007, GRIGGIO Model TYP NPC/A 30/19 AF-BO S.N. B3720207 Iodpoyk Dnfjfx Adkjhw Pretočna stiskalnica za lepljenje naravnega furnirja, laminata ipd. Širina delovnega polja: 1830 mm Maksimalna dolžina: 3010 mm Cena vključuje lepilne valje Osama S4 R/P-2000.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Ihjdpfx Asd Nnwledksw Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---