MEMBRANE PRESS s sistemom VARIOPIN

WEMHONER VARIOPRESS Basic + (KT-MB-28/15-240)

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 500 mm, merilno območje os Z: 300 mm, Visio 500 optična/taktilna 3D merilna naprava 453 (400 X, 500 Y, 300 Z) pomično območje. Merilna programska oprema: PC-DMIS CAD verzija 2015 Menjalnik za sonde s 6 mesti, skupno z 2 moduli TESASTAR MP Caodpfxeiyymrs Afqja Silent PC Big Tower z Windows 7 (vse je nameščeno in deluje) Kamera z 200-kratnim optičnim zoomom z obročasto/koaksialno osvetlitvijo in prehodno svetlobo (diascopsko) Vse popolnoma deluje. Y-os ima rahle praske. So bile zbrušene. To ne vpliva na funkcionalnost ali natančnost.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, MILESTONE S 2040 very good condition – only approx. 100 operating hours Axis travel: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 250 mm Equipment: - 1x 5-axis cutting head including automatic angle compensation - Height sensing including anti-collision monitoring - IGEMS software - Automatic de-sludging via chain conveyor - Abrasive tank and automatic abrasive dosing High-pressure pump Jetpower EVO Total power consumption: 45 kW Power supply: 400 V +/- 5% / 50 Hz Csdpfx Afjwd Ih Deqjaa Max. water pressure: 4,100 bar Water flow rate: max. 5.6 l/min Including installation, training, and warranty

Stanje: novo, Leto izdelave: 2025, - Tfon Leveltech® TF M-5516 izravnalni stroj Zasnovan za natančno izravnavanje; TF M-5516 učinkovito obvladuje debeline materiala od 1 do 15 mm z naprednimi kontrolnimi funkcijami za optimalno delovanje in enostavno uporabo. - Ključne tehnične specifikacije - Debelina materiala: 1 – 15 mm - Največja širina materiala: 1.600 mm - Najmanjša dolžina materiala: 110 mm Sistem za hitro menjavo poravnalnih valjev: standard Cajdpfx Afekyrqfjqja Regulacija reže za izravnavo: servo hidravlična / PC nadzorovana Zaščita pred preobremenitvijo: standard Nadzorni zaslon: na dotik Dimenzije stroja (D × Š × V): 3.500 × 2.905 × 1.950 mm Skupna teža: 19.000 kg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.200 mm, širina reza pri vzporednem vodilu: 1.300 mm, glavni premer žaginega lista: 450 mm, moč: 5,5 kW (7,48 KM), Oprema: dozator, motorna zavora, Stroj na voljo od oktobra 2025 - Odlično stanje - Digitalni prikaz za nastavitev višine, motorizirano nastavljiv - Digitalni prikaz za nastavitev nagiba, motorizirano nastavljiv 90° - 45° - Dolžina formatnega vozička 3200 mm - Predrezilo, 2-osno motorizirano nastavljivo - Digitalni prikaz širine reza na paralelnem vodilu 1300 mm, motorizirano nastavljiv - Moč motorja 5,5 kW (7,5 KM) Vario - Digitalni prikaz za brezstopenjsko nastavitev vrtljajev 2800 - 6000 min⁻¹ - Digitalni prikaz za kotni prislon, rezanje do 3800 mm Codpfx Afjw Rc H Hjqeaa - Podaljšek mize 800 mm

Stanje: pripravljen za uporabo (rabljen), Fanuc 6-osni robotski rezkalni center za aluminij in jeklo. X-pomik robota: 10.500 mm. Podaljšan doseg robotske roke (levo in desno): 3.045 mm. Maksimalna dolžina obdelovanca pri profilih: 15 metrov. Največja velikost obdelovanca brez podaljšanega dosega: 10.500 x 3.045 mm. Največja višina obdelovanca: 3.500 mm. 13-pozicijski avtomatski menjalnik orodij: Caodsv Sfk Hspfx Afqsa - 12 električnih orodij - 1 merilna sonda Rezkalna glava: - SK40 - 10 kW na vretenu / 12.000 ali 15.000 vrt/min - 7,5 kW na vretenu / 18.000 vrt/min - 4 kW na vretenu / 24.000 vrt/min - avtomatsko mazanje Veliko je možnih konfiguracij, odvisno od vrste obdelovanca. Trenutno sta na voljo dve ločeni delovni območji, lahko pa jih združite v eno veliko območje (za obdelavo večjih kosov) ali jih razdelite na več manjših delovnih območij za manjše obdelovance.

Leto izdelave: 2010, Stanje: rabljeno, Panel return system for use with a single edge banding machine The panel is transported to the operator via a motorized conveyor belt and a roller/conveyor table. Moeller mini control unit Maximum panel dimensions: 2500 x 1450 mm Maximum panel height: 60 mm Working speed: 8 - 25 m/min Working height from floor: 835 - 960 mm Codpfx Aforq Dmrjqeaa

Leto izdelave: 2023, Stanje: novo, In the area of 3D thermoforming, we also offer presses, turners, foil carousel storage systems, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Csdpfxed S Efaj Afqsaa Top-quality and suitable for all membrane presses (foil and veneer presses). You can purchase our membranes either pre-cut to your required dimensions or as roll stock. SILICONE Type: MS-2 Colour: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Colour: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore hardness: approx. 42°/60° Shore Thickness: 3.5–4 mm Operating temperature: max. 130°C Standard SILICONE Type RSS Colour: red-brown or transparent (other colours available upon request) Surface: both sides smooth Standard length: cut to size or 10 m rolls (other lengths available on request) Standard width: 1200 mm (up to 1800 mm available on request) Polymer: silicone Shore hardness: 30°–80° Shore Thickness: 0.5–10 mm

Stanje: rabljeno, Rotary hammer, chisel hammer, combination hammer, Bosch hammer, cordless rotary hammer -Manufacturer: Bauhaus Toolson, cordless drill driver type PRO-AS 18 Li-1 -Includes: charger and battery -Quantity: 4 drill drivers available -Price: per unit Caedpfx Ajuwgg Defqea -Transport dimensions: 240/180/H240 mm -Weight total: 1.9 kg/unit

Stanje: rabljeno, Working width: 1350 mm Number of sanding units: 2 pcs. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT: ROLLER 2ND BELT: COMBINATION UNIT (ROLLER/PAD) SUITABLE FOR SOLID WOOD, VENEER, AND INTERMEDIATE COATING SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Continuously adjustable feed conveyor with variable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION: ECO GEAR PATENT SYSTEM - 1 PC. DRUM BRAKE for belt stop - Swiveling ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP STRIP at the infeed Codpfermucxex Afqoaa - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER CONVEYORS, each with 2 rollers at infeed and outfeed - AUTOMATIC CENTRING OF FEED CONVEYOR - 1 EXTRACTION CONNECTION, 160 mm diameter - AUTOMATIC TABLE POSITIONING IMPORTANT: New patented belt oscillation system 1. No valves 2. No photo sensors 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt tracking issues! - Unitek steel calibrating roller (same for all models) - Unitek flexible pressure shoe before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set, 6 positions (per pc., same for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width: 1350 mm) - Unitek belt motor upgrade to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor: 14.7 kW (for Excel 2-belt only) - Unitek automatic table lowering in case of emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed or outfeed conveyor with 4 rollers (same for all models) - Price per roller conveyor - Unitek electronic control of machine functions with 12'' touchscreen (same for all models) Automatic workpiece sensing with feed motor control ----- Machine price for the above configuration on request! ----- Optional items at extra cost: Surcharge for 3-belt machine (roller-roller-pad, Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and user training: EUR 1,300.00 ----- All prices are net plus 19% statutory VAT. ----- (Technical data according to manufacturer's information – no liability assumed!)

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Underfloor press Pressing force: 300 kN Pressing area: 300 x 300 mm Specific pressure: 3.3 N/mm² Caodpfx Afjkuz T Uoqoa Opening: 200 mm Heating plate: solid steel heating plate Electrically heated up to 250°C Control system: Siemens S7-1200 with 12" touch panel Mechanical safety gate Data recording