Stanje: skoraj kot novo (rabljeno), EX-DEMONSTRATION MACHINE For sale is an as-new JET Oscillating Edge Sander OES-80CS equipped with a 400V motor / 2,800 watts and a sanding belt speed of 17 m/s. The exhibition machine is in its original condition, which means you receive the full warranty. Technical Specifications - Motor: 400 V / 2,800 watts - Sanding belt speed: 17 m/s - Sanding belt dimensions: 150 x 2,260 mm - Sanding belt tilt: 90° - 180° - Sanding table dimensions: 810 x 180 mm - Extension table: 250 x 300 mm - Oscillation stroke: 13 mm - Oscillations per minute: 108 - Extraction port diameter: 100 mm - Dimensions: 1,300 x 670 x 1,230 mm Ksdpeyb Sfaofx Adksdi - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping (by freight): Austria: €70.00 incl. VAT Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET OES-80CS, edge sander, oscillating, woodworking, 400V, machine, belt sanding technology, workshop equipment, industrial quality, 150x2260, belt Reference: R-A0117

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Širokopasovni brusilni stroj Costa C70 350 Delovna širina: 350 mm Kjdpfjyi A Syox Adkodi Število agregatov: 1 Skupna moč: 14 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Working width: 1300 mm Workpiece height - max.: 3 - 140 mm Control system: Xinje XD5 Partial bevel length - min./max.: 200 - mm Total power requirement: 13.4 kW Machine weight: approx. 4.5 t Space requirement: approx. 5.1 x 2 x 2.3 m This brush sanding machine is in very good condition, available immediately, and can be inspected under power at the location of the seller. DESCRIPTION: - Minimum workpiece length: 200 mm - The machine is designed for sanding flat individual parts such as kitchen cabinets, windows, doors, furniture, etc. - Modular control of each unit to meet specific customer requirements. - Frequency converters for speed control of the respective module motors. - Each unit can be easily pulled out for servicing and changing sanding paper and brushes. - Automatic adjustment of the working height range from 3-140 mm via the control system. - Oscillating air blower at the exit area. Kedpfx Adeylp A Dskjdi Other features: - Ball bearings, drive belts, and chains for the brush drives were replaced in June 2025.

Stanje: zelo dobro (rabljeno), Sanding machine for curved elements OMAB/Comec Working width: 200 mm Oscillating sanding belt Pneumatic material pressure Main motor: 5.5 kW Feed motor: 0.25 kW Extraction ports: 2x100 mm Kjdstvfmhspfx Adksdi Machine dimensions: 210x80x150 cm (H) Weight: 450 kg

Stanje: rabljeno, Baudin vertical grinder Kdsdpfoh Ab Scex Adkji machine sold without startup

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.000 mm, skupna višina: 2.202 mm, skupna dolžina: 3.900 mm, delovna širina: 1.100 mm, širina brušenja: 1.100 mm, skupna masa: 4.200 kg, delovna višina: 96 mm, hitrost transportnega traku: 250 mm/s, vhodni tok: 54 A, dolžina transportnega traku: 6.800 mm, Na prodaj robusten krtačni stroj Houfek Final 1100 v DBB postavitvi (vrtljive krtače + 2 valja). Stroj je bil malo rabljen. Prodajamo ga popolnoma opremljenega (krtače, brusni papir). Možnost preizkusa – konec marca načrtujemo demontažo na trenutni lokaciji. Možen takojšen nakup. Kdedpfx Adoyngcyokei

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Dimenzije mize X/Y: 1000mm/350mm, dolžina brusnega traku: 2600mm, širina brusnega traku: 150mm, hitrost traku: 20m/min, kot zamaha brusilne roke: 90°, dimenzije stroja X/Y: 1650mm/900mm, teža: ca. 300kg. Ogled na lokaciji je možen. Kjdpfxsyrg Hgo Adkjdi

Stanje: novo, Leto izdelave: 2026, OSTERBERGER KSBP 2500 Universal Factory-new combined universal long-belt sander, brushing machine, and polishing machine in portal construction Customizable sanding length and width per customer requirements, also available with two sanding belts running in parallel for two workstations—enabling both rough and finish sanding without changing the belt—as well as a brush and polishing head with automatic longitudinal adjustment left and right. The machine is suitable for rough and fine sanding, structuring (brushing), polishing, and high-gloss polishing of diverse surface materials—painted workpieces, natural workpieces, various metal sheets including stainless steel, aluminum, brass, copper, bronze, and various plastics. Kodpfx Aeyhzkpodkedi Combined long-belt sander with brush and polishing unit for workpieces up to 650 mm in height Motor-driven movement of the brush and polishing unit left to right and back Manual movement of the worktable forward and backward Motorized adjustment of the worktable up and down Worktable size: 2,500 x 1,000 mm (other sizes available upon request) Abrasive belt dimensions: 8,200 mm x 150 mm Brush and polishing unit drive power: 3 kW Abrasive belt unit drive power: 3 kW Dimensions (approx.): 4,200 x 1,600 x H 2,100 mm Weight (approx.): 1,000 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dolgopasovni brusilnik SAMCO Delovna širina 2800 mm Ksdpfeyiti Ajx Adkodi Delovna višina električno nastavljiva Dve hitrosti brusilnega traku Glavni motor 2,25/3 kW

Stanje: pripravljen za uporabo (rabljen), delovna širina 950 mm kalibracijska enota z kovinskim valjem kombinirana enota z gumiranim valjem in avtomatsko nastavljivim čevljem zagon zvezda-trikot pnevmatska oscilacija, nadzorovana s fotocelicami dve transportni hitrosti moč motorja 11 kW Kodpsynh Scjfx Adksdi leto izdelave 2000 napajanje 400V teža 975 kg

Stanje: dober (rabljeno), Lower and upper calibration line for panels, consisting of: First lower machine: roller - roller - pad Kdedpfou S Rccox Adkji Second upper machine: roller - roller - pad Variable speed drive, working width 1300 mm Vacuum system for small parts and outlet brushes

Stanje: pripravljen za uporabo (rabljen), Na voljo je dvovaljna brusilna naprava Sandingmaster. Delovna širina: 1100 mm, maks. širina obdelovanca: 1000 mm, maks. višina obdelovanca: 150 mm, dimenzije brusnega traku X/Y: 1130 mm/1900 mm, pomik: 14 m/min. Dimenzije stroja X/Y/Z: pribl. 3150 mm/1500 mm/1900 mm, teža: pribl. 2500 kg. Vključno s približno 50 brusnimi trakovi z različnimi oblinami. Dokumentacija je na voljo. Ogled na lokaciji je možen. Kedpfx Ajyq R Hhjdkjdi

Stanje: rabljeno, Leto izdelave: 1992, Dvosmerni brusilni stroj Oscilacija Končno brušenje Nagibne mize Trojni valj Trainer Kdedpfx Aeynf Uhedksi 380V

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7728 TEHNIČNI PODATKI - dolžina obdelovanca: 2800 mm - širina obdelovanca: 1250 mm - glavni motor: 5,5 kW Kdsdpfsya Hmvox Adkoi - širina brusnega traku: 150 mm - odpihovanje traku - pnevmatski pritisk - vrtenje desno/levo - električna nastavitev mize gor/dol - premer odsesovalnega nastavka: 180 mm - skupne dimenzije (d/š/v): 3950x1500x1450 mm - teža: približno 700 kg PREDNOSTI – ni bila lakirana – električna nastavitev mize – odpihovanje traku – pnevmatski pritisk – rabljeni brusilni stroj, v zelo dobrem stanju Neto cena: 8900 PLN Neto cena: 2120 EUR po tečaju 4,2 EUR/PLN (Cene se lahko spremenijo ob večjih tečajnih nihanjih)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 6929 TEHNIČNI PODATKI - dolžina obdelovanca: 2800 mm - širina obdelovanca: 950 mm - glavni motor: 5,5 kW Kedpsx Swuisfx Adkjdi - motor ventilatorja: 2,2 kW - širina brusnega traku: 160 mm - premer odsesovalnega priključka: 185 mm - rotacija desno/levo - skupne dimenzije (d/š/v): 4080x1800x1400 mm - teža približno 1000 kg PREDNOSTI – ni prebarvana – nemška proizvodnja – tehnična dokumentacija DTR – rabljeni brusilnik, zelo dobro ohranjen Neto cena: 8900 PLN Neto cena: 2120 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (Pri večjih valutnih nihanjih se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), Širokopasovni brusilni stroj SCM Sandya 30 RT Delovna širina: 1100 mm Delovna višina: 3–160 mm Število agregatov: 2 Kalibrirni valj Agregat s sekcijsko blazinico Moč motorjev: 1. 15 kW Kjdpfeyh N Icox Adkjdi 2. 11 kW Optična oscilacija Dolžina brusnih trakov: 2620x1115 mm

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism - Infinitely variable chip removal adjustment - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode Kjdpfx Ajk Dpp Sodkedi - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: rabljeno, Hitrost vrtenja 450 / 700 / 1.400 obr/min Stopnje prenosa 3 Moč 0,2 / 0,5 / 0,6 kW Tok 0,6 / 1,0 / 1,1 A Vpenjalna površina mize 540 x 390 mm Priključek 380 V / 50 Hz Vpenjalna glava RÖHM / 165 mm Premer krtače 235 mm Kdedpfx Asym D Abedkoi Dimenzije 0,80 x 0,44 x 1,13 m Krtačilni stroj HAHN & KOLB - UVM Tip 2 - vključno z zavornim sistemom

Stanje: zelo dobro (rabljeno), Kataloška številka 7733 TEHNIČNI PODATKI Kodpsya Hm Nsfx Adksdi - širina traku 150 mm - oscilacija - navpično gibanje oscilacije - 2 hitrosti vrtenja - delovna miza 1180x370 mm - nastavitev delovne mize gor/dol, naprej/nazaj in pod kotom - motor 3 kW - čevljar – za natančno brušenje - z ventilatorjem - delovna dolžina brušenja na traku 700 mm - zgornji/spodnji rezkarji za posnemanje robov - premer odsesovalnega priključka 70 mm - dimenzije d/š/v 1550/1400/1300 mm - teža 490 kg PREDNOSTI – z oscilacijo – s čevljarjem – z ventilatorjem – kompletno z rezkarji za obdelavo/posnemanje robov – za ukrivljeno in ravno brušenje – nebarvana – rabljeni brusilnik, zelo dobro ohranjen Neto cena: 7.500 PLN Neto cena: 1.780 EUR (glede na tečaj 4,2 EUR) (Cene se lahko razlikujejo ob večjih nihanjih)

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 6985 Kdedpfx Aex Swu Asdkei TEHNIČNI PODATKI - max širina obdelovanca 300 mm - višina obdelovanca 200 mm - agregat: žlebljen gumijast valj + čevelj + kovinski valj - delovna miza 1230x440 mm - trak 300x1900 mm zgoraj: - gumijast drsni valj - agregat približno 7,5 kW - drsni gumijast valj spodaj: - pogonski trak - pnevmatska oscilacija - 2 hitrostni stopnji podajanja - podajalni motor 0,85 kW - premer odsesovalnega nastavka 110 mm - dimenzije d/š/v 1250/1000/1950 mm - teža 530 kg – nebarvano – rabljeni brusilni stroj – stanje zelo dobro Cena brez DDV: 13.900 PLN Cena brez DDV: 3.300 EUR Cena brez DDV izračunana po tečaju 4,2 PLN/EUR (ob večjih spremembah tečaja se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7037 TEHNIČNI PODATKI - Dolžina obdelovanca: 2780mm - Širina obdelovanca: 800mm - Glavni motor: 4kW - Širina brusnega traku: 150mm - Ventilator - Vrtljaji desno/levo - Električna nastavitev mize gor/dol - Premer odsesovalnega priključka: 140mm - Skupne dimenzije (d/š/v): 3760x1440x1520mm - Teža: 502kg PREDNOSTI – Ni ponovno barvano – Z ventilatorjem Kodpfex Swvaex Adkedi – Električna nastavitev mize – Rabljeni brusilni stroj, v zelo dobrem stanju Neto cena: 9500 PLN Neto cena: 2260 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih nihanj tečaja se lahko cena spremeni)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 592 h, Calibrating and Fine Sanding Automatic Machine, Wide Belt Sander with Electronic segmented sanding pad and lacquer sanding capability A video of the machine in operation can be provided upon request. Ideal sanding automatic machine for interior finishing workshops, also suitable for intermediate lacquer sanding. Single belt machine with combination unit and electronic segmented pressure beam, side segments can be individually activated or deactivated. Segment width of the pressure beam: 35 mm Contact roller pneumatically adjustable, low wear due to serrated steel roller Grit compensation Drive motor 7.5 kW with automatic motor brake, stepless belt speed controlled by frequency converter from 2 - 18 m/s Feed belt speed steplessly adjustable via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-activated belt cleaning nozzle Cleaning brush at the outlet Constant working height of 900 mm by adjusting the machine upper section, allowing integration into sanding lines Feed belt very grippy and in very good condition Maximum sanding width approx. 1090 mm Workpiece height approx. 3 to 150 mm Common sanding belt dimensions: 1120 x 1900 mm 3 rubber-coated pressure rollers Infeed roller table and foldable outfeed table Preparation for vacuum blower—the conveyor belt is perforated and a socket for an optional blower is available. Alternatively, the belt can also be connected to the extraction system. Kedpfx Adjym Du Reksdi Extraction connections: 1 x 180 mm, 1 x 140 mm, and 2 x 100 mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: belt speed, feed speed, workpiece height, pressure beam activation points front and rear as well as side segments, belt cleaning nozzle, optional vacuum blower, pneumatic adjustment of the calibrating roller CE mark Operating manual Supplied without the pictured connection cable Original paint, only partially repainted Approx. 592 operating hours, i.e. approx. 40 minutes per week. Dimensions approx. 1800 (with table 2600) x 1800 x 2150 mm (LxWxH). Weight approx. 2200 kg. The machine can be demonstrated at our facility by appointment. We only offer machines that are ready for demonstration and available in our warehouse. See “more offers from this provider.”

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7910 TEHNIČNI PODATKI - maks. širina obdelovanca: 1350 mm - maks. višina obdelovanca: 150 mm – od zgoraj: - gumijasti pritisni valj - I. agregat (žlebljen kovinski boben za kalibracijo) - II. agregat (dva gladka kovinska bobna + sekvenčni čevelj) - gumijasti pritisni valj - čistilna krtača – od spodaj: - uvajalni kovinski valj Kodpfx Aoyquzcodksdi - vlečni trak - izhodni drsni kovinski valj - pnevmatska oscilacija trakov s fotocelicami - električno dvigovanje mize - 2 hitrosti podajalnega traku: 2–14 m/min - glavni motor: 5,5/15 kW - zavora - potenciometer višine brušenja - podajni motor: 0,75 kW - delovni tlak: 8 bar - premer izhodne cevi za odsesavanje: 200 mm, 120 mm - dimenzije dolžina/širina/višina: 1860x2200x1980 mm - teža: 1995 kg PREDNOSTI – nemška izdelava – nelakirana – tehnična dokumentacija DTR – rabljeni brusilni stroj, zelo dobro ohranjen Neto cena: 38.900 PLN Neto cena: 9.260 EUR (odvisno od tečaja 4,2 EUR) (Cene se lahko spremenijo ob večjih nihanjih tečaja)

Stanje: dober (rabljeno), Koda: 0281 Znamka: AGLA GALLI Model: 2 R 130 Avtomatski dvorolni polirni stroj za poliester in lak – Primeren za poliranje visokosijajnih poliestrskih ali poliuretanskih premazov, kovin, marmorja in podobnih materialov. 2 poševna valja – Zaradi tega naklona rotirajoče krtače z nihanjem zagotavljajo popolno poliranje obdelovanih površin. Sistem "REVERSE", ki blaži povratne premike, tudi pri težkih materialih, kot so marmor, lesene plošče itd. Kedpfx Adjx Db Nfjkjdi Dolžina 2 valjev: 1300 mm Premer valja: 300 mm Uporabna delovna dolžina: 4300 mm Uporabna delovna širina: 1300 mm Največja višina panela: 120 mm Motor: 15 KM x 2 Višina delovne mize: od 950 mm do 1180 mm Premer priključka za odsesovanje: 200 mm Skupne dimenzije: 5000 x 2350 x 1750 mm (v) Teža: 2500 kg

Stanje: rabljeno, Leto izdelave: 1997, Širina traku: 150 mm Dolžina traku: Velikost mize: Naprava za brušenje furnirja: da Osilacija: da Nagibna miza: da, 0°÷45° Kjdpeyffxzefx Adksdi Priključek za odsesavanje: 120 mm Moč motorja: 3 kW Dolžina stroja: 1440 mm Širina stroja: 800 mm Teža: 530 kg