Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Enostranska robilnica z lepilom PUR, EVA in sistemom AirFusion Hnodpfx Adsyuurvsksi Minimalna višina panela: 8 mm Maksimalna višina panela: 60 mm Minimalna debelina roba: 0,3 mm Maksimalna debelina roba: 22 mm Vodila za podporo panela Sistem za poravnavo panela pri vstopu Predrezalna enota Sistem lepljenja Enota za odrezovanje koncev Enota za grobo zgornje in spodnje prirezovanje Enota za fino prirezovanje in zaobljevanje Enota za zaobljene kote Enota za strganje roba Enota krtač

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 0-261-04-5736, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 806 h, višina obdelovanca (maks.): 60 mm, največja debelina roba: 8 mm, hitrost pomika os X: 11 m/min, skupna dolžina: 5.700 mm, Oprema: dokumentacija / priročnik, Brandt AMBITION 1440 KDF Year of products 2011 Hnedpfxeylvpqe Adkei Year of use 2013 Very good condition

Stanje: rabljeno, Leto izdelave: 1990, Rabljeni stroj Hnjdpfx Adoyncpvekei Leto izdelave: 1990 Oprema in tehnični podatki: - Avtomatski dovod robnega traku - Lepilni sistem s kartušo - Pritiskalni agregat s 4 valji - Enota za čelno žaganje - Enota za rezkanje poravnave - Kombinirana enota za poravnano/posneto/radijsko rezkanje - Radijski strgalnik - Polirni agregat - Debelina robnega traku 0,3 - 20 mm - Največja višina robnega traku 66 mm - Najmanjša dolžina robnega traku 200 mm - Podajalna hitrost 8/16 ali 12/24 m/min Razpoložljivost: takoj Skladišče: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2014, with joint milling unit including DIA tools, jointing capacity up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical description: - Hot-melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end trimming station (16,000 rpm) for front and rear protruding edges - HF milling station (16,000 rpm) with interchangeable cutter heads (combination version) and fine adjustment accessible from the operator side - Spare spaces for additional machining units (Hebrock system) - Feed approx. 10 m/min - Cutting depth adjustment for end trim saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double pressure roller top beam - Viewing windows on both rear and operator sides - PLC control including touchscreen Technical data: - Feed speed: 10 m/min - Panel thickness: 8–40 mm - Weight (depending on configuration): approx. 1,400 kg - Dimensions (L x W x H): 5,000 x 1,445 x 1,600 mm Airtronic for machines up to 8 mm edge thickness, 1 piece Technical data: - Edge thickness: 1.2–3.0 mm possible - Maximum panel thickness: 25 mm - Feed speed: 7–10 m/min depending on edge material - Ready for operation: 3 min - Air consumption: approx. 800 l/min for entire machine - Electrical connection: max. 32 A / 16 kW for entire machine, higher connection required with grooving saw - Extraction as usual - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 piece, up to max. 40 mm workpiece thickness Including pneumatic saw adjustment, separate pneumatic cutter adjustment, 1 piece, controllable from the operator panel (straight/radius) Buffing station (polishing wheel), 1 piece Corner rounding unit, 1 piece, incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness: 40 mm Minimum workpiece length: 300 mm Hnodpjyfp N Dsfx Adkoi Radius R 2.0 mm Radius scraper, 1 piece, incl. pneumatic lift-off device Radius R 2.0 mm Surface scraper, 1 piece, with pneumatic actuation Glue pot quick-change system prepared, 1 piece, without second glue pot—inclusive option for PU glue processing with the machine, without downward glue outlet device Special cleaning system for PU glue outlet downward, 1 piece 60 mm panel thickness for machines w/ jointing, 1 piece - Max. workpiece thickness with jointing unit: 60 mm - Jointing range at 40 mm–60 mm - Workpiece thickness up to 2 mm Special infeed fence for overlaid panels, 1 piece, 16 mm and 19 mm thickness - Max. overlay protrusion: 8 mm Separate extraction for jointing unit, 1 piece, directly on the jointing unit, vertical upwards, d=80 mm for optimum extraction - Highly recommended from AKV 3005 DK-F Ball bearing for corner rounding unit, 24.1 mm, 1 piece Ball bearing for corner rounding unit, 24.2 mm, 1 piece Nesting for combination milling unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Nesting for radius scraper unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Release agent spray unit, 1 piece Cleaning agent spray unit, 1 piece, for easier removal of adhesive residue Antistatic spray unit, 1 piece - Mandatory for airtronic - Before the combination milling station, antistatic coolant is sprayed onto the inside of the edge overhang Storage location: Supplier

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.200 mm, dolžina pomika po osi Y: 1.600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Pripravljen za 1 glavno vreteno s lepilno skupino, nameščeno desno na portalni prečnik. Glavno 5-osno vreteno, 12 kW Vrtalna glava s 31 vreteni: 21 vertikalnih in 10 horizontalnih Vrtalni list za utore, nagib 90° Pihalna šoba za borbo 60 mm Krožni magacinski sistem za 32 orodij, HSKF63 Hedpfex Irzcsx Adkeni Linearni magacinski sistem za 8 pozicij Krožni magacinski sistem za 10 pozicij Lepilna skupina Power Edge Pro Duo Varnostni nadzor z odbijačem Odrezovalni trak za ostružke Vakuumska črpalka Upravljalna programska oprema PowerTouch, WoodWop

Stanje: rabljeno, Leto izdelave: 2009, BIESSE ARTECH Edge Bander mod. Akron 430 A T - Used Technical Data: - Panel length min/max: 140-3200 mm - Panel width min/max: 85-3200 mm - Panel height min/max: 10-60 mm - Edge thickness (coil) min/max: 0.4-3 mm Hnjdpfx Adjyt Nvgskoi - Edge thickness (strips) min/max: 0.4-8 mm - Edge height min/max: 14-64 mm - Working height: 900 mm - Panel overhang from feed track: 25 mm - Feed track speed: 12 m/min - Extraction air speed: 30 m/sec - Air supply pressure: 7-10 bar SINTRA LT Control - Infeed guide with mechanical viewer - Pre-milling unit: 2 motors, 1.8 kW, with pad copiers Vertical adjustment of tool position - Gluing unit: glue pot capacity 2 kg 3 pneumatic pressure rollers Digital display for edge thickness - Shear unit with 2 pressure settings depending on edge thickness - Automatic strip edge feeder - End trimming unit: 2 motors, 0.50 kW, pad copier, 2 cutting positions 0°-15°, automatically selectable from the control panel (for increased edge overhang or trimming for best finish) - Multi-function corner rounding unit with 4 selectable positions via control panel Possible operations: flat, chamfer, radius 1, radius 2 For each finishing position, excess edge allowance can be adjusted (+/-) - Edge scraper unit - Glue scraper unit - Program creation for different finishing cycles Machine length: 3880 mm Weight: 1530 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Hedpfx Ajhy Tlrjdkeni Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Hjdpfx Adec S Di Rjkjni Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) Hodpfx Ajl D Rp Esdkoni F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Hnjdpfelc Ewisx Adkei Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Hedswiwnqopfx Adksni Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Hnodpofbr S Rofx Adkoi Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm - Thickness min. 6 mm Hnjdpfx Aebahd Esdkoi Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm

Stanje: rabljeno, številka stroja/vozila: 008430, Pozicija 1: Nakladalec MAHROS + STEFANI-RUNNER + EVOLUTION Hodpfxeyqxx So Adkjni Pozicija 2: Dvostranski robni lepilni stroj MAHROS + STEFANI-RUNNER + EVOLUTION Pozicija 3: Razkladalec MAHROS + STEFANI-RUNNER + EVOLUTION

Stanje: zelo dobro (rabljeno), Akzent robni lepilni stroj V31 - Dimenzije 1750 x 530 x 600 mm - Dodatno 600 mm Ø rotacijska plošča Hodpfsytw Ttex Adkjni - Frezalni motor z diskastim rezkarjem - Debelina obdelovanca 10-55 mm - Debelina roba 0,4-1 mm - 220 Voltov - 3,3 kW - Teža 135 kg

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Equipment: Machine table with 13 guide rollers for improved workpiece handling Edge feed, synchronized with the belt feed Edge thickness adjustable via digital counter Pneumatic roller separation with knife (for cuttable edges) Three pressure rollers Belt feed 0.25 kW; approx. 1250 mm long; feed rate approx. 6.0 m/min; 50 mm wide toothed belt with thick, gentle rubber coating for workpiece protection. Digital counter for height adjustment Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime Flush trimming unit for front and rear workpiece edges, automatic workpiece sensing, pneumatic trimming with knife for cuttable edges Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter diameter 70 mm, Z4, radius 2 mm/15°; central extraction nozzle Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm, Automatic height adjustment of the upper cutter with the belt feed Continuous workpiece support approx. 1800 mm long, extendable workpiece support rail approx. 300 mm Rotatable foil turntable Ø 800 mm Technical details: Minimum workpiece width approx. 80 mm Workpiece thickness 10 – 50 mm Minimum workpiece length approx. 220 mm Edge thickness 0.4 – 2.0 mm Roll separation max. 1.0 x 55 mm, 2 x 45 mm Glue pot heating capacity 2.7 kW Electrical connection 400V, 50 Hz, 3Ph + N Total connection load 3.8 kW Heat-up time approx. 10 minutes Pneumatic connection 6 bar Working height approx. 880 mm Dimensions approx. 1800 x 700 x 1300 mm, excluding foil turntable Ø 800 mm Hsdpfx Aeytkiusdkoni Net weight approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, allowing for workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge banding unit capable of processing various edge materials up to 20 mm thick. If you are looking for high-quality edge processing solutions, consider the HOMAG Optimat KAL 330 edge banding machine that we have for sale. Contact us for further details. • Line workpiece capacity: • Length: 250–3000 mm • Width: 120–1200 mm • Thickness: 8–60 mm • Edge banding machine (KAL 330) – Base and transport • Solid machine frame; extendable workpiece support with roller rail, ~800 mm • Transport chain, 80 mm wide with rubber pad; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed: 18–25 m/min • Working height: 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece offset/overhang: 30 mm • Workpiece thickness: 12–60 mm • Edge material from strip: 0.4–20 mm (max. cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter: 830 mm • Pneumatic connection: 7–8 bar • Feed system and control (integrated with KAL 330) • Flexible workpiece feed system wz10 for automatic feeding (longitudinal and transverse); for dimensionally accurate, square parts • Stepless adjustment of infeed guide (axis), speed adjustable at the entry terminal • Automatic lateral adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granulate storage • Quick-change system for QA/QE application unit; QA front glue reservoir for color change • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max. Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Milling unit HL84 with fixed milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic bevel/straight switching; manual side milling fence adjustment for changing edge thickness Hodpfoytf Irex Adkoni • Rough trimming unit: 2 motors arranged vertically, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: rough trimming with approx. 0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Contour milling unit Servo FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-driven movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces: 500 mm • Workpiece thickness: 12–60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guide with additional clamping for min. 120 mm workpiece length (single-sided) • Finishing and cleaning • Multi cleaning system MN21 automatic:

Stanje: rabljeno, Leto izdelave: 2016, Industrial Automatic Edge Banding Machine SOLUTION XD MAIN FEATURES "E TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: OPERATE THE MACHINE WITH JUST ONE "TOUCH" STANDARD PRESSURE UNIT WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES, AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand configuration for processing roll material and strip edges using all conventional hot-melt adhesives. The base frame consists of a robust welded steel stand with increased rigidity, providing optimal support for the processing units. The top pressure ensures a stable hold with a thick-walled steel profile and dual trapezoidal drive belt, which is automatically positioned according to panel thickness. Height adjustment with indicator at the top pressure and on the operator surface. Manual workpiece infeed system with large-scale work line and enlarged support area facilitates the insertion of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling. Working units attached to the pressure beam and mechanically linked to ensure automatic setting when changing panel thickness. Lower working units attached to the machine frame or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency inverters for optimal flexibility and improved production times; each unit is equipped with its own inverter. Extraction hood for all units positioned after the gluing station. Polycarbonate viewing windows provide a clear view of the units during processing. Interior lighting with sound-absorbing material for reduced noise emissions. Spacer at the infeed fence allows material to be fed into the machine at the correct distance. The distance adjusts automatically to the selected feed speed. Swiveling control panel, positioned at the infeed, is adjustable for ergonomic operation. Hjdpjxy Tm Iefx Adkoni The electrical system complies with current regulations. Electrical components are housed in a metal enclosure mounted on the machine frame, equipped with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide rubberized nylon chain plates for optimal guidance and high precision. The chain runs on two guides made of hardened and ground steel – one round and one flat – to ensure straight feeding and prevent lateral displacement. Automatic lubrication of the chain; the control system adjusts the amount of oil according to the number of processed panels. External roller conveyor positioned along the entire machine length; equipped with a retractable system extendable up to 650 mm (for panels up to 1200 mm maximum width). E-TOUCH PC control system enables fast and easy execution of main functions, including: – Processing of programs in "Just in Time" mode – Possibility of management via parts lists – Management options through ...

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 Hedpeun N Dljfx Adkeni B) Rotation unit (90°) C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: rabljeno, Holz Her STREAMER 1057 FÜ + PU Hrúbka hrany: 0,4 - 6 mm Moderné ovládanie s prepínačom na nastavenie agregátov Predfrézovacia jednotka na zarovnanie pred lepiacou časťou Plne automatický zásobník hrán pre rolky aj pásiky Lepiaca stanica GLU-JET pre kartušové aj PU lepenie Nanášanie lepidla tryskovou technikou Výška obrobku: 6-60 mm Automatické nastavenie výšky lepidla Kvalitné 3-valcové tlakové zariadenie, 1. valec motorický Orezávacie zariadenie pneumatické pre rolky aj pásikový materiál do 6 mm hrúbky hrany S pneumatickým nastavením sklonu kapovacích píl 0-10° Frézovacia jednotka: zarovnávacie frézovanie do 6 mm, frézovanie rádiusov, fazetové frézovanie - 15° Jednotka na zaoblovanie rohov - do 3 mm hrúbky hrany Škrabacia jednotka pre fazety a rádiusy s 2 držiakmi škrabiek Plošná škrabacia jednotka - dokončovanie Rozprašovacie zariadenie - PU Stroj komplet s celým opracovacím náradím Hnsdpfeyg H Hisx Adkji Stroj je DIELŇOU SKÚŠANÝ v TOP STAVE K dispozícii zo skladu Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, DETAILED PHOTOS AND VIDEO AVAILABLE ON DISK, PLEASE CONTACT ME VIA SMS AND I WILL SEND THEM PLEASE DO NOT WRITE ON OLX, ONLY CALL OR EMAIL TECHNICAL DATA: Manufacturer: BRANDT Model: KDF 650 Year of manufacture: 2011 Condition: used, in very good condition Edge thickness: 0.4-3 mm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Maximum edge width: 60 mm Maximum power consumption: 21kW Machine dimensions: height 2300 mm, depth 1550 mm, length 5800 mm Weight: 2600 kg Power supply: [230V/400V] EQUIPMENT: Hnsdsxuu N Hepfx Adkji electronically controlled infeed fence relatively rare automatic edge feeder pre-milling unit glue application unit pressure unit end cutting unit for straight or angled cuts trimming unit for excess edging corner rounding unit profile scraper flat scraper polishing unit 3 spray stations for anti-adhesive fluids TECHNICAL CONDITION: Machine fully operational, in continuous use Regularly serviced by authorized service Ready for operation Low working hours LOCATION: Bochnia TRANSPORT: self-collection

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Skladišče za shranjevanje in nakladanje plošč Biesse Winstore 3D K1 s kontrolnimi ploščami in transformatorji. Hnodpjyt Sxdefx Adkji Sistem prijema: Z vakuumskimi priseski, avtomatski na portalu (Gantry) Avtomatsko skladišče za shranjevanje in nakladanje, približno 50x10 m Možnost dodatnega nakupa: Biesse Selco WN6 TwinPusher Na voljo konec leta 2026

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) Hjdpfxou Ekbns Adkjni FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Free space EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Free space (for optional scraper addition) Buffing unit 08.617 (0.18 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Planing unit (2 x 6.6 kW) + spare position EDGE BANDING SECTION (for each side): Infrared heating for workpiece edge pre-warming Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Hjdpfx Adjwz Ic Ajksni Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Hodpfxsunrwns Adkeni Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Safety and sound insulation cabins FORMATTING (per side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING (per side): Gluing unit (hot melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (number of slots): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Milling unit 08.055 (2 x 0.66 kW) 0°–30° Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving, rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°–180°