Leto izdelave: 1994, stanje: rabljeno, Aggregate kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, cross-cut unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine -HOMAG milling units allow you to rebate, groove, and profile -with sensing from two sides each -Milling unit: swiveling -2x Perske motors -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other motors with different power ratings available from stock at extra cost -Dimensions: 500/500/H600 mm -Weight: 54 kg Bodpfxjb Uhp Tj Am Ejww

Stanje: rabljeno, Aggregate modular system, format processing unit, machining unit, milling unit, contour milling unit, joining milling unit, cross-cut unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine - With HOMAG milling units you can rebate, groove, and profile - With scanning from two sides each - Milling unit: swiveling Bwodpfxsb Uhrgj Am Eew - 2x Perske motors - Power: 0.6 kW - Voltage: 165 Volts - Frequency: 300 Hz - Speed: 18,000 rpm - Other motors with different power levels are available from stock for an additional charge - Dimensions: 480/350/H570 mm - Weight: 55 kg

Stanje: rabljeno, Modular aggregate system, format processing aggregate, cutting aggregate, milling aggregate, contour milling aggregate, jointing milling aggregate, cross-cutting aggregate, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine -The double-motor HOMAG contour milling aggregates ensure precise corner rounding, even in veneer processing -for rounding the edges at the front and rear workpiece edges, as well as the top -each with 2x corner copying aggregates -2x Perske motors -Power: 0.3 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Dimensions: 650/4500/H700 mm Bwjdpfxjb Uhrns Am Eow -Weight: 86 kg

Stanje: rabljeno, Modular assembly unit, contour processing unit, machining unit, milling unit, profiling milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine – HOMAG milling unit for jointing milling applications Bsdpfsb Uhugex Am Esww – With heavy-duty dovetail guide – Milling unit: swivelling – 1x Perske motor – Motor type: KNS 71-12/2 – Power: 3.0/4.4 kW – Voltage: 220/380/380 Volt – Frequency: 50/100 Hz – Speed: 2880/5880 rpm – Other motors with different power ratings available from stock at extra cost – Dimensions: 1230/1100/H600 mm – Weight: 342 kg

Stanje: rabljeno, modular aggregate kit, format processing unit, machining aggregate, milling aggregate, contour milling aggregate, jointing milling aggregate, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine -HOMAG milling aggregates allow you to rebate, groove, and profile -with sensing: from 2 sides each -Milling unit: tiltable -2x Perske motors -Power: 0.6 kW -Voltage: 165 volts Bwodpfx Aob Uhvdsm Ejw -Frequency: 300 Hz -Speed: 18,000 rpm -Other motors with different power outputs available from stock at extra charge -Dimensions: 650/450/H600 mm -Weight: 74 kg

Stanje: rabljeno, Aggregate construction kit, formatting processing unit, cutting unit, milling unit, contour milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine -HOMAG milling unit: for jointing milling -with heavy-duty dovetail guide -milling unit: swiveling -1x Perske motor -motor type: KNS 70.12/2.01 -power: 3 / 4.4 kW Bwsdpfx Aob Uhvrom Eow -voltage: 220/380/380 volts -frequency: 50/100 Hz -rotational speed: 2,880 / 5,880 rpm -other motors with different power ratings available from stock at extra charge -dimensions: 1100/600/H1200 mm -weight: 300 kg

Stanje: rabljeno, Aggregate modular system, format processing unit, machining unit, milling unit, contour milling unit, jointing milling unit, crosscutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine -HOMAG milling unit: for format processing Bwjdpeb Uhvtefx Am Ejw -with heavy-duty dovetail guide -1x Perske motor -with long shaft -Motor type: KNS 70.12-2DF -Power: 5.5/8.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2870/5880 rpm -Other motors with different power ratings available from stock at additional cost -Dimensions: 1250/1350/H600 mm -Weight: 400 kg

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, cutting motor, spindle motor, milling motor Bwsdpfxeb A Tcxj Am Ejw - Power: 0.4 kW, 11,300 rpm at 200 Hz - Voltage: 133 Volts - Shaft mounting: Ø 20 mm - Tool: mm - Dimensions: 250/80/H170 mm - Weight: 4.7 kg

Leto izdelave: 1999, stanje: dober (rabljeno), Edgebanding Machine IMA Compact MFA / F / 5212 Year of manufacture: 1999 Serial No.: 06601 Maximum edge thickness: 12 mm Bsdpfxoia Naqs Am Ejww Minimum workpiece thickness: 10 mm Maximum thickness of roll material: 3 mm Feed speed: 12 m/min Adjustment of jointing fence: manual Heating time: 10 min Jointing unit: Yes, with 2 milling units Automatic roll magazine: Yes Shear cut up to: 0.2 - 3.0 mm Solid edge magazine: Yes Panel preheating by radiant heater automatic gluing with granulate glue pot Cut-off saw angle adjustment via program Multifunctional unit Round-off unit/corner copying with 2 motors Profile scraper Flat scraper Buffing unit Aggregate display via mechanical number display Control via operator panel Operation via selector switch/buttons Protective hood Weight approx. 2500 kg Dimensions (L x W x H): 6500 x 1000 x 1600 mm CE marked Technical data subject to change

Stanje: zelo dobro (rabljeno), 4-sided sizing and edge banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min KZ0400b) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 325/M1/C Feed speed (adjustable): 15–40 m/min with PC 22 SIZING UNIT: Twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: Top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), grooving unit for rabbeting and grooving UF11 (4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) KZ0400c) Rotating station (90° longitudinal-transverse) "HOMAG" model TDL 310 / 25 / 12 (for longitudinal to cross transfer) Feed speed (adjustable): 20–60 m/min KZ0400d) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 326/M2/C Bwedpsiztxyjfx Am Eow Feed speed (adjustable): 15–32 m/min with PC 22 SIZING UNIT: Pre-milling cutter (1 x 4.5 kW), twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: End trimming unit HL 84 (2 x 0.22 kW), top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile trimming/copying unit FF32 (4 x 0.4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) MINIMUM EDGE LENGTH: 70 mm (For narrow workpieces: max. thickness 25 mm, max. edge thickness 2 mm, max. cycle rate 20 pcs/min, max. feed speed 20 m/min.)

Stanje: zelo dobro (rabljeno), SCM Contura in excellent condition. Bedpjt E T I Nofx Am Ejww

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Bjdju Ekbnspfx Am Eeww Free space EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Free space (for optional scraper addition) Buffing unit 08.617 (0.18 kW x 2)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Ott Atlantic V/12 Edge Banding Machine Pre-milling unit End trimming, 2 x milling, radius scraper, surface scraper Edge thickness: 0.2 - 12 mm Minimum workpiece width: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min Condition: very lightly used Bwodpfx Ametdz Tqs Eew Year of manufacture: 2001 Price: 10,000

Stanje: rabljeno, Leto izdelave: 2014, Za povpraševanja: Zoltán Utasi +36 30 205 7380 • motorni pritrdilni most za nastavitev pritiska • Električni sistem za brezstopenjsko podajanje 400 V / 50 Hz, 2,2 kW • "Krmiljenje PPC 221 – z 8,4'' VGA barvnim zaslonom" Visoko zmogljivo krmiljenje z zelo enostavnim upravljanjem • Predrezalna enota za robove 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 min⁻¹) s 2 rezkalnima agregatoma za predrezanje plošče na robu • Rezkar, diamantni Ø 70 x 64 x 30 mm, Z2, leva rotacija Za predrezalno enoto 1801 / 1802 • Rezkar, diamantni Ø 70 x 64 x 30 mm, Z2, desna rotacija Za predrezalno enoto 1801 / 1802 • Polnilna enota za robni trak 1903 SYNCHRO avtomatski transport kolutov in materiala v trakih • Enota za nanos lepila Glu Jet GJ301 avtomatska (2,3 kW, 50 Hz) • Pripravna enota za lepljenje 1913 pnevmatska prvi valj poganjan, 2 dodatna pritisna valja z individualnim pnevmatskim upravljanjem • Odrezna enota 1918 (60 mm) pnevmatska Bedpfx Amox Huhce Ejww (2 x 0,45 kW, 12.000 min⁻¹), pnevmatsko vrtljiva 0/10° • Multifunkcijska rezkalna enota 1827 pnevmatska (2 x 0,65 kW, 200 Hz, 12.000 min⁻¹) • Vertikalni sledilni valji ročno ročna nastavitev vertikalnega sledilnega valja po 0,1 mm za rezkanje previsa roba, npr. za plastične robove • Rezkar, diamantni Ø 56 / 60 mm, Z = 2, R = 2,0 mm, leva rotacija Diamantno prevlečen, kompakten rezalni alat s CM tehnologijo (LEUCO sistem), vgrajeno odsesavanje ostružkov, patentiran ProLock-E • Rezkar, diamantni Ø 56 / 60 mm, Z = 2, R = 2,0 mm, desna rotacija Diamantno prevlečen, kompakten rezalni alat s CM tehnologijo (LEUCO sistem), vgrajeno odsesavanje ostružkov, patentiran ProLock-E • Kotna kopirna enota 1832 (1 x 0,35 kW, 200 Hz, 12.000 min⁻¹), za debelino roba do 3 mm • Rezkar, diamantni Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, s CM tehnologijo (LEUCO sistem) in integriranim odsesavanjem ostružkov za profilirno enoto 1832 • Strgalo 1929 pnevmatsko vključno s pnevmatsko nastavitvijo (ločen za zgoraj in spodaj) • HW obojestranska rezila za nosilec strgala 1929 / 1927 R = 2,0 mm (potrebni 2 kosa) • Ravno strgalo 1964 Odstranjevanje ostankov lepila za čist lepljen spoj. • Polirna enota 1940 (2 x 0,12 kW, 50 Hz, 1400 min⁻¹) Za končno čiščenje in poliranje robov. Z 2 tekstilnima diskoma, vrtljiva od 0–5°

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Prodajam popolnoma opremljen robni lepilni stroj BRANDT KDF 230 AirTec, letnik 2017: Konfiguracija: Ročno nastavljiva vstopna omejitev Ročno nastavljivo poravnalno rezkanje Lepljenje robov možno z EVA lepilom / PUR lepilom / AirTec enota Ročno nastavljivo območje pritiska materiala Pnevmatsko nastavljiva žagalna enota za kapiranje Ročno nastavljivo rezkanje radija zgoraj in spodaj Ročno nastavljiva enomotorna zaokroževalna enota Bwjdpfjythxmox Am Esw Pnevmatsko izklopljiva radijska izvlečna rezila R2 (komplet R1 vključen) Krmilna plošča Delovna višina ročno nastavljiva Višina materiala 8-60 mm Debelina robnega materiala 0,4-3 mm Hitrost pomika 10 m/min Skupna dolžina skupaj s podajalnim krožnikom 5070 mm Zelo dobro stanje, popolnoma funkcionalen! Vključena popolna dokumentacija in CE certifikat. Na voljo takoj.

Stanje: zelo dobro (rabljeno), EINSEITIGE KANTENANLEIMMASCHINE (LINKS) Kantendicke im Rollen (min/max) mm 0,3 / 3 Kanten Dicke in Leisten / Streifen (min/max) mm 0.8 / 20 Platten Dicke (min/max) mm 8 / 60 Steuerung ICOS Open Bjdpfx Asyxl Sism Ejww Vorschubgeschwindigkeit m/min (regelbar) 6 - 30 Oberdruck keilriemen angetrieben Schutz- und Schallschutzkabinen OPTIONAL: Panel-Einführungssystem 63.152 (mm 500 x 500) Verstellbares Anschlaglineal C.N gesteuert Fügefräsaggregat mit CN-gesteuerte 08.379 (Kw 4,0 x 2) Kanten Druckzone (CN-gesteuerte) Verleimteil (Hot Melt Leim) 283.1513 Kantenmagazin für Rollen (fach N°) 1+2 Kappaggregat 08.42/30/B (Kw 0,66 x 2) max 30 m/min (0°-25°) Fräsaggregat 08.055 (Kw 1,85 x 2) 0°-25° Multifunktionsaggregat (Radiusfräsen und Formfräsaggregat) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profilziehklingenaggregat 08.519 Flachziehklingenaggregat 08.521 Sprayeraggregat (für Polierflüssigkeit) Schwabbelaggregat 08.617-2 (Kw 0,18 x 2)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Number of motors: 2 Bjdpfxsyxndbs Am Ejww Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber band Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 0-261-04-6588, Funkcionalnost: popolnoma funkcionalen, moč: 21 kW (28,55 KM), višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 18 m/min, skupna dolžina: 6.060 mm, skupna masa: 2.600 kg, The machine has the following configuration: Emulsion spray at infeed and outfeed Edge preheating Pre-milling unit: Tool diameter: 100 mm, tool height: 63 mm, diamond tool with interchangeable knives, motorized distance adjustment Glue application unit: Glue and hot air application, heated applicator roller, quick change of the entire unit, automatic positioning via motor, 3 pressure rollers, edge feed speed: 14 m/min Cut-off unit: Twin-motor unit with automatic tilting up to 15°, THK prism guides Radius milling unit: 2 tools, automatic adjustment in two axes, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL SPECIFICATIONS Workpiece thickness: 8–60 mm Feed speed max.: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double upper pressure for part stability Electronic thickness control Bwjdpfx Ameyu If Nj Ejw Frequency inverter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control panel

Stanje: rabljeno, Leto izdelave: 2016, Rabljeni stroj Leto izdelave: 2016 Bwjdpfx Amoynpc Ns Eew Stanje: Trenutno še v proizvodnji Oprema in tehnični podatki: Leplilni bazen Pritiskalna cona Krožna žaga Kombinirana rezkar r=2 mm, poravnavajoči rezkar Debelina obdelovanca 8 - 50 mm Minimalna širina obdelovanca ca. 75 mm Minimalna dolžina obdelovanca ca. 120 mm Debelina robu 0,4 - 3,0/5,0 mm Višina roba maks. = višina obdelovanca + 4 mm (2+2) Električni priključek 400V, 50 Hz , 3-fazni Skupna priključna moč 3,2 kW Hitrost pomika 8,0 m/min. Priključek za pnevmatiko 6 bar Neto teža 550 kg Stroj je možno dograditi z: Radijusno vlečno rezilo Ploščato vlečno rezilo Polirni agregat Lokacija: NRW Razpoložljivost: cca december 2025

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Bwodpfsyqybuox Am Esw Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, LIGMATECH ZHR 15 – transportna enota / valjčni transporter (transportni sistem za vračanje obdelovancev / bumerang) – se bo prodajal ločeno od stroja za obdelavo robov. HOMAG Optimat KL79 A20/S2 (2002) Nameščene enote: • Lepilna postaja A20/S2 (debelina roba do 20 mm) • Magazin za dovod robov • Enote za obrezovanje sprednjega/zadnjega roba (dve žagini moduli) • Enote za obrezovanje zgornje in spodnje strani • Enote za zaobljanje kotov (dve glavi) • Enote za strganje profila (zgornja/spodnja) • Strgalo za lepilni spoj • Enote za brušenje/poliranje • Pnevmatsko upravljanje in sistem za vakuumsko sesanje Tehnični podatki (iz specifikacij proizvajalca): • Hitrost podajanja: 18–24 m/min • Debelina roba: 0,3–20 mm • Debelina obdelovanca: 12–60 mm • Minimalna širina obdelovanca: 55 mm (pri debelini 22 mm) / 100 mm (pri debelini 60 mm) • Dolžina stroja: 10.115 mm • Teža: ~6.200 kg • Napajalna napetost: 400 V, 50/60 Hz Bwodjycg D Tjpfx Am Esw • Stisnjen zrak: 8 bar

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 1.300 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, Oprema: CE označba, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 Bodpfxjxw T Tpe Am Eeww UNITS Unit for panel sizing 1 Unit: Trimming Model: RT30 Motor power: 3.5 kW Max. speed: 9,000 rpm Edge processing unit 1 Unit: End trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction unit Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge processing unit 4 Unit: Edge scraper Model: RB40 Edge processing unit 5 Unit: Glue scraper Model: RC20 Edge processing unit 6 Unit: Brush Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Total installed power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing milling unit Multifunction unit Top pressure Pressure by rubber-coated belts Panel support guide Panel positioning by NC Angled panel infeed system Automatic time-based engagement Edge preheating lamps Coil magazine Hotmelt glue pot Prefuser for hotmelt Edge pressing roller track Spraying unit Machine programming software: SINTRA Panel ejection via transfer roller conveyor Panel feed by motorized carpet Edge banding machine return conveyor, left CE marking

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.4 / 1 Roll material (edge) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control system / Software: ICOS Open (Windows XP) Feed speed (adjustable) m/min: 10 – 50 No transmission bar (Master & Slave systems) SIZING UNIT (per side): Sprayer unit (for liquid non-stick agents) Milling unit (2 x 8 kW) EDGE PROCESSING UNIT (per side): Gluing station (hot melt glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no.): 6 Servo-drive guillotine shear (for cutting the edge material) Pressure zone (CNC-controlled) Premilling unit 08.055 (2 x 1 kW) 0°-30° Profile scraping unit 08.519 Bsdoyypi Uepfx Am Eeww Flat scraping unit 08.50 Buffing unit 08.617-2 (2 x 0.18 kW) Sprayer units (for polishing fluid) Universal milling unit for grooving, rebating, and profiling – 08.190 (1 x 4.5 kW) 0°-90° / 180°-270°

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Edge Bander / Edge Banding Machine Manufacturer: EBM Model: KDP 112 SLK Year of Manufacture: 2000 Edge bonding using hot-melt glue pot For plastic edges and veneers: 0.4 to 1 mm For PVC edges and thick veneers: 1.0 to 3.0 mm Solid wood edging up to 5 mm Flush trimming saw with cross-cutting unit Top and bottom flush trimming Approx. dimensions: 2.86 x 1.32 x 1.3 m Approx. weight: 550 kg Total power requirement: approx. 10 kW Bsdpfjy Ahubsx Am Eoww Condition as shown in photos. Please also refer to the item description. Parts can be collected by arrangement. All dimensions are approximate. All information provided to the best of our knowledge, but without guarantee. Subject to prior sale. The items can be collected by the buyer or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance. The item is offered under differential taxation. The stated sale price is the gross final amount. No invoice showing VAT will be issued. You will receive an invoice according to §25 UStG. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for spare parts use only, and only to commercial buyers. By submitting a bid, the buyer accepts this as the basis of the purchase contract. If the item is used, a 12-month warranty applies if the buyer is a consumer (§13 BGB). If the buyer is a business (§14 BGB), all warranties are excluded. If the item is new, a 24-month warranty applies for consumers (§13 BGB). For businesses (§14 BGB), the warranty period is 12 months.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, številka stroja/vozila: H/32059, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, hitrost pomika os X: 22 m/min, TEHNIČNI PODATKI Višina panela: 10 mm do 50 mm Masiven les: 12 mm PVC/ABS: 0,4 mm do 3 mm Največja hitrost podajanja: 22 m/min Minimalna dolžina panela: 150 mm Minimalna širina panela: 70 mm PODROBNOSTI STROJA Motorji rektifikacijske skupine: 1,5 kW (2 motorja) OPREMA Upravljanje na dotik za prilagajanje delovnih skupin Vodilo za podporo panela Stranski valjčni transporter z prostohodnimi valji za podporo panela Skupina za premaz proti prijemanju Nosilna plošča za valje COMBIMELT lepilna enota za vroče lepilo z avtomatskim dozirnikom VarioMelt s predtalilnikom Patentirana pritisna enota za robove s segmentiranimi pritisnimi ploščicami Obrezovalna skupina z 2 motorjema Čistilna skupina z 2 motorjema Enota za zaobljenje Enota za strgalo za robove Bwedpfx Aeydibwsm Eew Delovna višina nastavljiva elektronsko prek C.N. Motorni gumirani trak z zgornjim pritiskom