Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 90 mm, širina obdelovanca (maks.): 3.200 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, The machine has the following configuration: Number of panel sizing/milling units left side: 5 Milling unit (AS10) Hsdpjyq Avhjfx Adkoni Double fine millers, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for bevel and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 90 mm Panel length max.: 3,200 mm Panel width max.: 3,200 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm EQUIPMENT Conveyor chain with pushers Pressure with rubber belt Panel guiding rails, positioned by NC Edge roll magazine with 6 positions Hot-melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on overhead cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and utilization of the machine at the destination. External reference: 7685

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Hnodpfxsyqybuj Adksi Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, delovna širina: 1.935 mm, število vreten: 40, višina plošče: 350 mm, delovna dolžina: 6.200 mm, število osi: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum pods for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for grooves in X-direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for installation, securing, and use of the machine at the destination. Hnedpfx Adoyqx U Hokei External reference: 8105

Stanje: rabljeno, OTT Tornado - TOP Upravljanje - preko 15-palčnega barvnega zaslona na dotik za popolno avtomatizacijo in najvišje udobje upravljanja CM-CombiMelt-lepilni sistem, primeren za uporabo EVA in PUR talilnih lepil ter vseh običajnih čistilnih granul Hedpfxsyuvblo Adkjni Enota za lepljenje za spajanje ivernih plošč Avtomatski valjčni magazin Avtomatski magazin za robove Dvojna kapalna enota s samodejnim nagibom 0° / 3° Rezkalna enota za ravnanje robov - rezkanje na ravno - 12 mm Fino rezkanje RADIUS - rezkanje radija - profilni nož R2 - R5 Avtomatizirano kopirno rezkanje - zaokroževanje vogalov Vlečna rezkalna enota - radij - faza Ravna vlečna rezkalna enota Enota za pršenje sredstva za drsnost - PU Komplet za čiščenje z enoto za fino poliranje Zelo stabilna delovna podlaga z valjčnimi tirnicami - SPREDAJ s škarjastim izvlekom Popolna oprema orodij vključena Stroj je KOT NOV v IZJEMNO DOBREM STANJU Stroj iz upokojitve Prvi zagon leta 2009, zelo malo delovnih ur Možnost leasinga Iz zaloge Lieboch

Stanje: rabljeno, Holz Her Auriga 1308 FÜ + PU Kompaktno izvedbo – debelina robu 0,4 – 6 mm SPS zaslonsko upravljanje Edge-Control PPC 221 barvni zaslon Predrezalna enota za spajanje pred lepilno enoto Popolnoma samodejni magazin za robne trakove in letvice Lepilna postaja GLU-JET za EVA in PUR lepila, kartuša ali granulat + PU Nanos lepila z uporabo šobne tehnike Višina obdelovanca 6-65 mm avtomatska nastavitev višine nanosa lepila Pritiskalna enota 1912-3 pnevmatska Odlomna enota 1918 pnevmatska za robni trak in letvice do 8 mm debeline s pnevmatskim preklapljanjem od 0-10° naklona žage Rezkalna enota 1827 MOT 4, poravnalno rezkanje 8 mm, radijsko rezkanje – posnemanje robov – 15° 1827 MOT NC-os preko upravljalne plošče Profilna rezkalna enota 1832 SPS za zaobljene vogale do debeline roba 3mm v prehodu Strgala za posnete robove in radije z 2 motorno pogonjenima nosilcema strgal Ploskovna strgala – finalna obdelava Pršilna naprava – PU Popolna oprema DIA-orodij vključena Hodpfxjymdayj Adkjni Stroj je DELAVNIŠKO OBNOVLJEN in v ODLIČNEM STANJU Na voljo iz zaloge Lieboch

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Hnedpfex S Hmzex Adksi Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, DNEVNA UPORABA V PROIZVODNJI največ 2–3 ure, STROJ BO ZAMENJAN Z VEČJIM NOVIM STROJEM STROJ JE NA VOLJO TAKOJ. TEHNIČNI PODATKI SO NA FOTOGRAFIJAH DELOVNE POSTAJE: TEHNIČNI PODATKI: 1. Levi + desni rezkar Hnsdoym Sguopfx Adkei 2. Valjčno nanašanje lepila 3. Prednja in zadnja žaga 4. Ravni rezkar tudi za polne laminate 5. Kotni rezkar 6. Rondomat spredaj, zadaj, zgoraj, spodaj 7. Ravninski klini rezkar 8. Klini rezkar z radijem 9. Sušilnik STROJ DOSTAVLJAMO STRANKAM PO CELEM SVETU DOLŽINA STROJA PRIBLIŽNO 7 METROV TEŽA: 3500 KG

Stanje: dober (rabljeno), Koda: 0367 Znamka: SCM Model: BASIC 1 Avtomatski robni lepilni stroj za les, PVC, melamin, ABS Tehnični podatki: Delovna višina mm: 8 - 40 Debelina robnega materiala mm: 0,4 - 3 Hitrost podajanja: 8 m/min Minimalna dolžina plošče mm: 140 Hnsdpfoytfnfjx Adkei Minimalna širina plošče mm: 60 Enota za čelno obrezovanje: Hitrost vrtenja rpm: 10.000 - Moč motorja kW: 0,6 Enota za čelno frezanje: Hitrost vrtenja rpm: 27.000 - Moč motorja kW: 0,5 - Naklon rezkarjev: 12° Delovni tlak Atm: 6 Skupne dimenzije mm: 1700 x 700 x 1250 (v) Teža kg: 470

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Homag EDGETEQ S-380 - Optimat KDF 660 SC Največja debelina robnega traku pri lepljenju: 12 mm Največja debelina plošče: 60 mm Največja debelina navitega materiala: 3 mm Minimalna širina obdelovanca: 70 mm Primerna za PUR lepilo Enota za taljenje PUR Magazin trakov / robov Spojna rezkalna enota Tlačna cona z NC-krmiljenjem Enota za prečno žaganje (razrez na mero) Postaje za rezanje / zaobljanje / posnemanje Kotni kopirni agregat Strgalo za profile, ravno strgalo Hsdpfx Asx Itb Rsdkoni Polirni (ščetkarski) agregat

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Brandt KDF 430C stroj za lepljenje robnih trakov na voljo v zelo dobrem stanju! DEBELINA ROBNEGA TRAKU: 0,4–8 mm DEBELINA OBDELAVANCA: 8–60 mm z motoriziranim nastavljanjem višine POMIK: 11 m/min SKUPNA DOLŽINA: 4770 mm REZILO ZA ODLAGANJE RADIA S PNEVMATSKIM NASTAVLJANJEM REZILO ZA PLOŠČE Hnsdpfx Asytb Smsdkji PILING ENOTA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Dodatna oprema Aplikacijska enota s teflonskim premazom za 1,5 kg EVA granulata Zgornja in spodnja polirna enota Obdelovalni stroj za lepljenje robov FORMAT4 TEMPORA 60.06 glueBox x-motion je bil izdelan leta 2024. Opremljen je z vrtljivim magazinom s premerom 750 mm za robni trak debeline od 0,4 do 3 mm, aplikacijsko enoto GlueBox ter zgornjo in spodnjo polirno enoto. Stroj vključuje napredno upravljanje x-motion Plus z 15-palčnim zaslonom na dotik SmartTouch in multifunkcijsko rezkalno enoto za natančno obdelavo plastičnih robov. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Hnedpfx Adox D Hbtskji Lepljenje robov

Stanje: novo, Leto izdelave: 2025, Gluing unit: Yes Edge thickness: up to 3 mm Workpiece thickness: from 8 mm to 50 mm Minimum workpiece width: 110 mm Glue pot: Granulate, quick-change pot End trimming unit: Yes End trimming / flush cutting: Yes Milling station: Chamfer / Radius Corner copying: Yes Flat scraper: Yes Radius scraper: Yes Buffing unit: Yes Anti-adhesive spray unit: Yes Infeed fence adjustment: Manual Hedek Eai Uepfx Adkjni Workpiece thickness adjustment: Manual Power consumption: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, V našem skladišču je na voljo dobro vzdrževan in obnovljen robni lepilni stroj SCM OLIMPIC K203. Stroj je v zelo dobrem delovnem stanju in pripravljen za takojšnjo uporabo. Oprema stroja: - DIA predrezkarji - Par enot za obrezovanje koncev - Par grobih ravnih rezkarjev - Enota za zaobljenje (Rondomat) – 2 motorja - Strgala za radius - Polirne krtače Stroj je popolnoma opremljen in pripravljen za proizvodnjo. Hjdeyl Tvzspfx Adkoni

Stanje: rabljeno, Leto izdelave: 1995, Rabljeni stroj Leto izdelave: 1995 Stanje: nepreverjeno Oprema in tehnični podatki: - Debelina robnega traku 0,3-5 mm - Debelina obdelovanca 6-45 mm - Širina obdelovanca min. 60 mm - Dolžina robnega traku min. 200 mm - Podajalna hitrost 11 m/min - Električna priključna moč 3,4 kW - Izpušna cev 100 mm - Poraba zraka 550 m³/h - Lepilni sistem patrona 1906 - Kapalne žage spredaj in zadaj 1975 - Radialna rezkalna enota zgoraj in spodaj 1942M - Radialno strgalo zgoraj in spodaj 1929 - Polirna enota 1941 K - Dolžina stroja 3675 mm - Širina stroja 1470 mm - Višina stroja 1200 mm Teža 950 kg Razpoložljivost: kratkoročno Lokacija skladišča: 63934 Röllbach Hnjdpfjyq T Insx Adksi

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Features and technical data: - Round pot glue unit - with second glue unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: two motorized saw units for front/end cap trimming Hodpfxsyqanbo Adkoni - Top/bottom milling: two milling units with copying wheels for radius or chamfer work - Radius scraper: pneumatically controlled, for reworking radii - Surface scraper: for smoothing the edge surfaces - Polishing unit: two buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Replacement of the feed frequency inverter by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3–12 mm - Power supply 3x 400 V AC, 50 Hz - Nominal power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² power cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: short term Location: Röllbach

Stanje: rabljeno, Holz Her Sprint 1329 Power Heavy-duty design – Edge thickness 0.4 – 8 mm (15 mm with tool change) 21.5" PPC 332 touchscreen control fa.s.t. setting technology "Setup in the gap" Motorized, position-controlled bridge height adjustment Fully automatic edge magazine for coil and strip material, motorized Pre-milling unit for jointing before the gluing station GLU-JET cartridge glue application station – for granulate and PUR bonding, thin film technology Maximum edge height: 60 mm Glue height adjustment / sensing nozzle Pressure section 1913, motorized-pneumatic with NC servo axis End trimming unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment for 0-10° bevel of the trimming saws Multifunctional milling unit MOT6 – 6 NC controlled axes: Flush trimming up to 8 mm (15 mm) Radius trimming Bevel trimming 0 - 15°, pneumatic Hodpfx Adeyi Algokeni Copy milling unit MOT 4, corner copying, postforming corners with 4 NC controlled axes, for milling the upper and lower longitudinal edge and copying the front and rear vertical edge, working height 60 mm with shelf program Scraper unit MOT4 Flat scraper unit – finish with pre- and post-sensing Buffing unit for final cleaning and edge polishing with 2 textile discs, swiveling 5° Spraying system for infeed and outfeed areas, as well as antistatic agent at the pressure station Infeed area: electronically controlled separating agent spray unit Pressure section: electronically controlled antistatic spray unit Outfeed area: electronically controlled cleaning agent spray unit with cleaning fluid Air cushion table at infeed / L = 1800 mm, W = 600 mm First delivered in 2022 Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Stanje: zelo dobro (rabljeno), EINSEITIGER KANTENANLEIMER (links) Kanten (Band auf Rollen) Dicke (min/max) mm 0,3 / 3 Hjdpfx Adsyt Izbeksni Kantenstärke in Streifen / Leisten (min/max) mm 0,4 / 20 Plattenstärke (min/max) mm 8 / 60 NEU (2024) Numerische Steuerung EDGETEQ MOD - Power Touch (WoodCommander) Einstellbare Vorschubgeschwindigkeit bis zu 25 m/min Zuführsystem EZ 14 Sprühvorrichtung (Antihaftmittel) Anschlaglineal, per N.C. verstellbar Vorfräseinheit (vertikale Fugenfräser) 2 x 3 kW Leimeinheit (P.U.R.-Leim + Schnellschmelzsystem) Druckzone für das Band, per N.C. einstellbar Kantenrollen-Halteeinheit (mit 2 Abrollern) Abschneideeinheit HL 84 (2 x ca. 0,5 kW) Pneumatisch schwenk- und einstellbar Grobschneideeinheit BF 20 (2 x ca. 1,5 kW) Multifunktionseinheit (Konturfräsen) FK 11 (2 x ca. 0,4 kW) Konturabzieheinheit Feineinheit (Leimabzieher + Poliereinheit) FA 11 Plattenrückführungssystem "LIGMATECH" Mod. ZHR 541/L/095 (mit Portalbrücke und 360° drehbarem Vakuumkopf)

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Dobro vzdrževan in obnovljen robni lepilnik SCM tipa K208 TERL je na voljo v našem skladišču. Stroj je v zelo dobrem stanju in popolnoma opremljen, vključno z: Hnsdpfx Aeylxxnodkji - DIA predrezkarji - Parom enot za čelno rezanje - Parom grobih ravnih rezkarjev - Parom finih poševnih rezkarjev - Rondomat z 2 motorjema - Radijskimi strgali - Krtačami Stroj je bil skrbno vzdrževan in je pripravljen za delo. Cena: 8.900 € + DDV

Stanje: dober (rabljeno), Leto izdelave: 1998, Debelina robnega traku: od 0,4 do 5 mm Debelina obdelovanca: od 10 do 50 mm Skupna dolžina: 2730 mm Teža: 720 kg - Lepljenje robnega traku Hsdpfox Tu Rdex Adkjni - Obojestransko kapanje - Poravnano rezkanje - Hitrogrelni rezervoar s časom segrevanja 5 do 6 minut - Orodje za odrezovanje materiala v roli - Digitalno upravljanje temperature - Širina stroja: 825 mm

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Hodpfjytr Hbox Adksni Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Hnjdpfsyttrxsx Adkji Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, moč: 25 kW (33,99 KM), višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, hitrost pomika os X: 18 m/min, Oprema: CE označba, TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Max. feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge heater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting to size Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Hodpfxjytr Rgo Adkoni Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total installed power: 25 kW EQUIPMENT Panel support guide Spraying unit Control system with more than 20 control options CE marking The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 6216

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: AH/004965, STEFANI Solution 5400 je enostranski industrijski robni lepilnik, namenjen srednjim in večjim proizvodnim obratom. Modelna serija SOLUTION je zasnovana kot prilagodljiva rešitev tako za samostojno delovno postajo kot za integracijo v avtomatizirane proizvodne linije. KOMISIONA PRODAJA. Hnedpjynb Nnefx Adkei

Stanje: dober (rabljeno), Koda: 0316 Znamka: HIRZT - ITALIJA Model: MIREA - CE standard Samodejni robni lepilnik s talilnim lepilom za panele, pohištvo, pohištvo po meri, lesena vrata, kuhinje, kopalniško pohištvo in drugo - CE standard Tehnični podatki: Nanos lepila na ploščo Višina plošče 10/50 mm Maksimalna debelina traku 1 mm Minimalne dimenzije plošče 70 x 140 mm Samodejni podajalnik z jermenskim pogonom - Hitrost podajanja 4 m/min Poraba energije 4 kW Enota za obrezovanje s kopiranjem: rezkarji 70 x 14 x 12 mm, Z4, 15 stopinj Enota za končno odrezovanje z nožem Raztegljiva sprednja podpora - vhodna razširitev - Višina delovne mize 900 mm Hnjdpjypm Tuofx Adksi Skupne mere 1900 x 1100 x 1250 mm (v) Teža 300 kg

Stanje: rabljeno, Holz Her Auriga 1308 XL Hnedpfxeyh Ilyo Adkoi Compact model – Edge thickness 0.4 – 8 mm SPS touchscreen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue dosing control, including cleaning routine Pre-milling unit for jointing before the gluing station Fully automatic edge magazine for coil and strip material GLU JET adhesive application station (cartridge) + PU gluing, with sensing nozzle Workpiece height 8–60 mm High-gloss package Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic adjustment of end saws for 0–10° bevel cuts Multifunction milling unit 1827 MOT4: Flush trimming up to 8 mm, radius milling – bevel milling 15° with NC axes Contour milling unit – corner rounding for edge thickness up to 3 mm, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for bevels and radii with 2 scraper holders via NC axes Flat scraper unit FK701 with pre- and post-sensing – finishing Buffing unit – polishing Spray equipment at the infeed and outfeed Spray device with slip agent for high-gloss edges Complete DIA tooling included First delivered 2021 Machine in TOP CONDITION from shutdown/closure – small business Available ex stock Lieboch