Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: Dusdpfou R S Nwox Altow - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation

Stanje: zelo dobro (rabljeno), Edge banding machine HOLZ-HER Auriga 1308 XL -used- PC control with display, touchscreen, swiveling control panel, program memory, automatic pressure bridge adjustment, feed via transport chain, extendable workpiece support, diamond jointers for both climb and counter-rotation, strip magazine, standby function, cartridge system Glu Jet, cartridge system with sensing nozzle, capable of using PUR adhesives, pressure unit with powered roller, pneumatic control of pressure unit, cross-cut saw with 2 HF motors, cross-cut saw with pneumatic swiveling, flush/radius milling unit, motorized positioning control of the milling unit, diamond-coated milling tools, blow nozzle at the milling unit, corner copying unit with diamond-coated cutter, radius scraping blade with motorized positioning, blow nozzle on the radius scraper, technology-driven surface scraper, blow nozzle at the surface scraper, spray unit for release agent, Dusdjy T D N Aspfx Altew spray unit for cleaning agent, buffing unit. ----- Technical Data ----- Edge thickness (roll material): 3 mm, Edge thickness (strip material): 5 mm, Workpiece thickness: max. 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Workpiece support clearance: 480 mm, Turntable diameter for edge material: 800 mm, Trim blade for roll material up to: 3 mm, Heat-up time: 3.5 min, Power, jointing cutter: 0.8/1.2 kW, Power, cross-cut saw: 2x0.45 kW, Power, milling station: 2x0.65 kW, Power, corner copying: 0.3 kW, Power, buffing unit: 2x0.09 kW, Extraction port Ø jointing cutter: 2x80 mm, Extraction port Ø cross-cut saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø scraper unit: 120 mm, Compressed air connection: 6 bar, Total length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality info: - all settings checked - set according to manufacturer specifications - new heater - cartridge system leak tested - complete basic inspection - complete basic cleaning - electrics checked - pneumatics checked - immediately ready for use

Stanje: zelo dobro (rabljeno), HEBROCK K36 Airtronic Edge Banding Machine – used – PC control with monitor, touchscreen, swiveling operator panel, program memory, automatic pressure bridge adjustment, feed with transport chain, extendable workpiece support, motorized infeed fence adjustment, diamond jointers (both conventional and counter-rotation), quick-heating glue pot, interchangeable glue pot system, Dsdpjymyp Refx Alteuw suitable for use with PUR adhesives, cut-off saw with HF motor, flush trimming unit, flush/radius/chamfer milling unit, pneumatic milling unit changeover, multi milling tool, multi-radius scraper knife, dust collection box for radius scraper, air-blast nozzle at radius scraper, flat scraper, air-blast nozzle at flat scraper, changeover motor for corner copying, spray unit for separator agent, spray unit for cleaning agent, spray unit for anti-static/coolant, spray unit for lubricant, LED lighting in machine area, exchangeable glue pots, zero-joint Airtronic system. ----- Technical Data ----- Edge thickness, roll material: 0.5–3 mm, Max. edge thickness for corner copying: 3 mm, Workpiece thickness: 8–60 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 200 mm, Feed speed: 7–10 m/min, Support plate Ø for edge material: 850 mm, Guillotine for roll material up to: 3 mm, Jointer motor output: 2 x 2.2 kW, Cut-off saw motor output: 0.37 kW, Milling station output: 2 x 0.37 kW, Corner copying output: 0.37 kW, Buffing station output: 2 x 0.18 kW, Extraction port Ø jointer: 60 mm, Compressed air connection: 7 bar, Total machine length: 5,540 mm, Dimensions (LxWxH): 5,540 x 1,210 x 1,450 mm, Weight: 1,700 kg Quality Info: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for use

Stanje: novo, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Demonstration model- New: GLUJET GJ725 This offer includes a comprehensive equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutter unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feeder 1903 - Adhesive application system Glu Jet GJ725 NC PUR PRO - Pneumatic pressure unit 1912-3 - Pneumatic end trimming unit 1918, 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, left-hand rotation - Diamond cutter Ø 56/60 mm, right-hand rotation - Corner copying unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spraying unit TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and glue quantity control - Long infeed fence 1,252 mm - Motorized adjustment of infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for 1918 end trimming unit Dedpju R Sy Asfx Altouw - Shelf program - Flat scraper FK701 - Spraying unit GM301 after pressure unit - new demonstration machine -

Stanje: rabljeno, Hebrock K34 Debelina roba do 8 mm SPS zaslon s 15" zaslonom na dotik Predrezalna enota za pripravo pred lepilnim delom (3 mm) Lepilna kad z zamenljivim rezervarjem in izpustom lepila Največja višina roba: 60 mm Odrezovalna enota Rezkalna enota za poravnavo/radije/fazete Enota za zaobljanje vogalov (radiji/fazete) Djdpfewtfvksx Altsuw Večradijski strgalnik (R1/R2) Nesting Površinski strgalnik Naprava za brizganje ločilnega sredstva Letnik 2023, 52 delovnih ur Stroj je KOT NOV, V VRHUNSKEM STANJU Iz razpuščene mizarske delavnice/pokojnina Iz mizarske delavnice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, year of manufacture 2006: Configuration: - Infeed fence adjustable manually - Jointing milling manually adjustable - Edge banding with EVA - Pressure zone for material height adjustable via servomotor - End trimming saws pneumatically adjustable - Radius milling (top and bottom) manually adjustable - Corner rounding unit, 2-motor, manually adjustable - Radius scraper R2 pneumatically retractable - Flat scraper - Polishing brushes - Operator panel Power Control PC20+ Working height adjustable via servomotor Material height: 8 – 50 mm Edge material thickness: 0.4 – 8.0 mm Feed speed: 11 m/min Dodpjq A N Nusfx Alteuw Total length incl. feed magazine: 5860 mm Total weight: 2660 kg Very good condition, fully functional!

Stanje: rabljeno, Leto izdelave: 2023, Posebna cena – razstavni stroj Garbsen INDUSTRIJSKI AVTOMATSKI ROBNI LEPILNI STROJ stefani md (slike stroja niso zavezujoče glede na spodaj navedene dejanske lastnosti) GLAVNE ZNAČILNOSTI ROBNO LEPLJENJE MASIVNEGA LESA DO 15 MM DEBELINE: ENOSTAVNA IN FUNKCIONALNA OBDELAVA ROBOV VELIKIH DIMENZIJ "SGP" POSODA ZA LEPILO: MOŽNA UPORABA EVA IN POLIURETANSKIH LEPIL ZA POPOLEN LEPILNI SPOJ "STARTOUCH" KRMILJENJE: UPRAVLJANJE STROJA Z ENIM DOTIKOM SPLOŠNE LASTNOSTI Samodejni enostranski robni lepilni stroj za lepljenje robov z vročim lepilom na štirih straneh ravnih plošč in za nadaljnjo končno obdelavo. Okvir stroja in vzdolžni nosilec iz hladno valjanega jekla v škatlasti konstrukciji, izdelano kot en celoten element za visoko togost in odsotnost vibracij pri sprejemu delovnih agregatov. Odpiralne odprtine s tobogani za izpust morebitnih ostankov ostružkov na tla. Zgornji pritisni nosilec iz debelostenske jeklene konstrukcije s stebri iz litega železa za konstrukcijo brez vibracij, na katero so pritrjeni delovni agregati. Pritisni valji na podajalni verigi v dvojni vrsti, izdelani iz gume z visokim koeficientom trenja ter z drsenjem po ležajih. Naprava za zaščito pritisnih valjev pred preostalimi ostružki. Elektronska nastavitev zgornjega pritisnega sistema glede na debelino plošče. Zgornji delovni agregati so pritrjeni ali mehansko povezani na pritisni nosilec za samodejno nastavitev pri spremembi debeline plošče. Spodnji delovni agregati so pritrjeni na okvir stroja ali vzdolžni nosilec za natančno referenco glede na ploščo. Vsi visokofrekvenčni motorji so upravljani preko frekvenčnih pretvornikov (inverterjev). Zaščitni pokrov za vse agregate, ki so za lepilnim agregatom. Okna iz polikarbonata omogočajo dober pregled nad agregati med obdelavo. Notranja osvetlitev kabine. Zaščitni pokrov z zvočnoizolacijskim materialom za nižji nivo hrupa med delovanjem. Razmaknik na vhodnem vodilu omogoča dovajanje plošč v pravem razmiku; razmik se samodejno prilagodi izbrani podajalni hitrosti. Sesalni nastavek nameščen na protivibracijskem zaščitnem pokrovu. Zasukljiv upravljalni pult v ergonomski poziciji ob vstopu v stroj. Električna oprema je skladna z veljavnimi predpisi. Električne komponente so nameščene v kovinskem ohišju, pritrjenem na okvir stroja, ter opremljene z vrati za enostaven dostop v primeru vzdrževanja. Podajanje plošč Poteka preko podajalne verige, sestavljene iz gumijastih drsnih čevljev z visokim koeficientom trenja, pritrjenih na 1-1/4” industrijsko verigo. Veriga drsi po dveh vodilih iz kaljenega in brušenega jekla, enem okroglem in enem ploščatem, kar zagotavlja ravno podajanje in preprečuje stranske zamike. Samodejno mazanje verige. Količina mazalnega olja se preko upravljanja optimizira glede na število obdelanih plošč. Zunanji valjčni sprejemnik je nameščen po celotni dolžini stroja; sestavljen iz izvlečnega sistema z drsenjem po linearnem ležaju ter plastičnih valjčnih sledilcev s kovinskimi zatiči. "STARTOUCH" KRMILJENJE Glavne značilnosti: 12” barvni zaslon na dotik, grafični prikaz vseh delovnih agregatov in njihovega stanja (vklop/izklop). Dsdpfjzc Ilxjx Altjuw

Stanje: rabljeno, Použitý stroj Výbava a technické údaje: Automatické podávanie hrán Lepilni sistem kartuša Tlačni agregat s 4 valji Krožna žaga za krajšanje Poravnalni rezkalni agregat Kombiniran rezkalni agregat poravnava/posneti rob/radij Radij strgalo Polirni agregat Debelina robnega traku: 0,3 – 20 mm (odvisno od agregata) Maksimalna višina robnega traku: 66 mm Minimalna dolžina robnega traku: 200 mm Pomik: 8/16 ali 12/24 m/min z LIGMATECH povratnim transportom obdelovancev Povratna pot je pri tej napravi nad nivojem obdelave plošč. Obdelovanci se po poševni ravnini vračajo k upravljavcu. Dujdow Nad Hepfx Altow Posebnosti v primerjavi z modeli ZHR 0x: avtomatsko prepoznavanje in obračanje kosov iz prečnega v vzdolžno smer a samodejna prilagoditev hitrosti obračanja glede na dolžino obdelovanca Minimalne in maksimalne dimenzije obdelovanca: pri vzdolžni obdelavi robov: 2200 x 1000 mm pri prečni obdelavi z naknadnim obračanjem: 250 x 120/2200 x 800 mm Največja debelina obdelovanca: 60 mm Lokacija: Bavarska Dobavljivost: Kratkoročna

Stanje: rabljeno, Leto izdelave: 2011, Rabljeni stroj Leto izdelave: 2011 Stanje: stroj popolnoma obnovljen in servisiran Oprema in tehnični podatki: Brezstopenjska hitrost podajanja 10–18 m/min Krmiljenje Edge Control 19 z 18,5" barvnim zaslonom na dotik Agregat za dodajoče rezkanje Djdewka N Topfx Alteuw Podajanje robnih trakov Postaja za nanašanje lepila, kartuša, tipalna šoba z avtomatsko nastavitvijo višine lepila Tiskalna enota Agregat za krajšanje Večnamenski rezkalni agregat Kopirni rezkalni agregat Agregat za obla robove Ravna rezkalna rezila Polirna enota Debelina obdelovanca 6 - 60 mm Debelina robnega traku 0,4 - 8 mm Minimalna širina obdelovanca 60 mm Najkrajša dolžina obdelovanca 180 mm Dimenzije: 5300x1500x1600 mm Teža: 2200 kg Lokacija: 65439 Flörsheim Razpoložljivost: na kratki rok

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Edge thickness PVC: 0.4 - 2.0 mm Panel thickness: 10-45 mm Edgebanding from roll automatic end trim unit Flush trimming unit for flush and radius trimming (r = 2 mm) Motor: 0.37 kW - 9000 rpm Extraction connection: 2 x 60 mm Heating capacity: approx. 1150 W Total power: 2 kW Weight: approx. 240 kg Dimensions: 2040 x 1240 x 1260 mm Djdexppwbspfx Altsuw Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 1998, Used machine Year of manufacture: 1998 Equipment and Technical Data: With a length of 5500 mm, the Quadromat is the shortest edge processing machine equipped with an integrated workpiece return, enabling complete processing of edge materials. Duodowkba Tjpfx Altjw Within the machine, not only are the longitudinal edges milled, but the end edges are also copied, thus completing the machining process. The finished workpiece is returned to the operator, eliminating the need for any manual rework. - PLC control system with up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edge material thickness: 0.4 - 12 mm - Minimum edge material length: 400 mm Feed rate: 18 m/min - Equipped with 2 jointing milling motors - Multifunctional milling unit (for flush, chamfer, and radius operations) - Scraper blade - Cross-cut saw - 2 glue pots (for transparent and white glue) plus 1 spare pot - Compressed air connection: 7-10 bar - Extraction connection: 160 mm Weight: approx. 2400 kg Availability: short notice Location: Flörsheim

Stanje: novo, Leto izdelave: 2025, Machine neuve Année de fabrication : 2025 Compacte et flexible sur un espace très réduit. Sur seulement 2,13 m de longueur, les pièces reçoivent leur finition ici. Équipée d’un moteur haute fréquence de 1,1 kW, d’un groupe d'assemblage avec fraise spirale garnie de diamant, d’un module d'encollage avec revêtement Téflon, d’un groupe de pré-découpage et d’un module de fraisage multifonction HF. 2 emplacements libres pour unités de finition, comme par exemple une lame à tirer et une unité de polissage. Utilisation simple via écran tactile couleur 3,5''. Données techniques Longueur machine : 2 122 mm Épaisseur des pièces : 10–45 mm Dusdpfxsy Eizzs Altjw Largeur des pièces (min) : env. 120 mm Épaisseur des chants : 0,4 – 2,0 mm Hauteur des chants (max) : = hauteur pièce + 4 mm (2+2) Raccordement électrique : 400 V Puissance totale raccordée : 3,6 kW Avance : 6,5 m/min Connexion pneumatique : 6 bars Poids net : env. 490 kg Options : Unité lame à tirer Outils diamant hauteur = 45 mm Emplacement : Flörsheim Disponibilité : court terme

Stanje: rabljeno, Leto izdelave: 1998, Used machine Year of manufacture: 1998 Proven quick-heating tank; heating-up time approx. 5 min. Safety interlock for the application roller; the roller starts only after reaching the operating temperature Centrally adjustable top pressure beam Dedpfxew Tfw Hs Altsuw Pneumatic edge feeding and roll separation Connected load: approx. 11.5 kW, heating capacity 4.5 kW, frequency converter 300 Hz 4 kVA HF cross-cut saw unit: electrically and pneumatically controlled, motor power 0.37 kW Saw blade diameter 100 mm HF flush trimming unit: radius, straight, and chamfer milling Trimming from coil up to 3 mm Edgebanding and cross-cutting up to 5 mm Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at the front Digital position display for feed height adjustment, edge thickness, and milling With chassis With heated infeed ruler Compressed air connection 6 bar Central extraction port 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: Dedpfx Alswka S Ieteuw - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with run-out function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece processing sequence, and integrated line control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights of 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free positions for finishing units. 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Jointing unit chip removal: 0–2.0 mm, stepless Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: - Surcharge for radius scraper unit with blow-off device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with run-out function - Surcharge for diamond tooling, height = 65 mm for jointing unit - Riepe spray device (anti-stick) at jointing unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° bend + manual gate valve mounted on the machine, D=200mm Availability: short notice Dujdpfx Aljw I U Drotow Location: Hochheim

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Stanje: Preverjeno delovanje Oprema in tehnični podatki: Maks. debelina robnega traku mm: 20 Maks. višina robnega traku mm: 51 Maks. debelina materiala v roli mm: 3 Minimalna dolžina obdelovanca mm: 140 Minimalna širina obdelovanca mm: 60 Lepljenje: 1906 patrona Dodpfx Aljw I U E Astouw Pritiskalna enota Rezkalna enota 1920 za rezkanje poravnano do 20 mm in posnetje robov Potrebna površina D x Š x V mm: 3150x1800x1375 Teža pribl. kg: 800 Lokacija: Flörsheim Razpoložljivost: Kratkoročno

Stanje: rabljeno, Leto izdelave: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical specifications: - with new glue application system - Infeed fence adjustable manually - Milling unit 1961 - Edge feeding unit 1903 - Glue application station 1906 with sensor-controlled nozzle - Pressure unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M for radius, bevel, flush trimming - Complete air nozzle assembly - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Extraction hood set - Complete safety hoods - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edgeband thickness, depending on equipment: 0.4–5 mm - Max. edgeband height: 55 mm - Edgeband strip length: min. 350 mm - Edgeband overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: - Jointing/milling unit: 900 m³/h - Milling unit: 280 m³/h Duedpfx Aowka H Sjltew - Scraper unit: 280 m³/h - Static negative pressure: - Jointing/milling unit: 1490 Pa - Milling unit: 1650 Pa - Minimum air velocity: 20 m/sec - Jointing/milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Röllbach

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Technical Specifications: Edge thickness (coil material): 0.4 - 3 mm (material dependent) Edge thickness (strip material): 0.4 - 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (limitations possible with certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, spacing 600 mm - 3-color LED signal light at infeed - Motorized adjustment of infeed fence - Long infeed fence 1252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool correction - f.a.s.t = fast setting technology - ECO-Mode energy saving mode Duedoy Nuf Tspfx Altew - Preparation for RETURN connection (third-party) - Guide system BS 501; precise 90° workpiece feeding for edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing unit FG201 with 2 cutting heads, 64 mm height - Edge feed MG 301 - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the glue jet nozzle - Includes vacuum pump for professional PUR adhesive processing. The PUR is deprived of the reaction partner (water molecules) by the vacuum pump, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently from the machine's power supply and automatically compensates for any vacuum loss. Full control over PUR! - Pressure unit DW 301 with motorized NC axis; 1st roller driven with pneumatic dip control, 2 conical pressure rollers - GM301 spray unit after pressure station for high-gloss edges - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - Multifunctional milling unit FR301 MOT6 - Shelf program - Profile trimming unit FF 301 MOT1 - Scraper unit ZK301 MOT4 including high-gloss package - Flat scraper FK702 - Complete separation and cleaning fluid spray unit - GM 301 spray unit after pressure station (for high-gloss edges) - Buffing unit SW 501 Piping above the machine is not included in the scope of delivery. Availability: short notice Stock location: Hochheim

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 Features and Technical Data: Edge feed for coil and strip material Jointing unit with 2 milling heads Cartridge glue application system 3-roller pressure section End trimming unit Radius milling unit Dujdpfx Alsvymdqetew Radius scraper unit Corner copying unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Max. edging height: 55 mm Min. edging strip length: 350 mm Max. edging overhang per side: 3 mm Min. workpiece width: 60 mm Min. workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6480 x 1250 x 1690 mm Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2003, Rabljeni stroj Leto izdelave: 2003 Oprema in tehnični podatki: - Krmiljenje MAGELIS - Za vroče lepilo na osnovi EVA - Lepljenje: 2x1,5 kW, u=12000, 200 Hz - Prirezovanje: 2x0,2 kW, avtomatski zasuk 0°/3°, 2 HM žagini listi 140 mm - Poravnalno rezkanje: 2,07 kW, z WPL glavami HF 70, premer 70 mm - Rezkanje radija: R2 - Radijska strgala - Površinska strgala - Zgornji lepilni bazen - Mere obdelovanca: - Minimalna širina: 70 mm - Debelina: 8-42 mm - Minimalna dolžina: 150 mm - Debelina roba: 0,2-6 mm - Podajalna hitrost: 12 m/min - Priključek za odsesavanje: 160 mm Dimenzije: 4.500 x 1.250 x 1.300 mm Teža: 1.650 kg Razpoložljivost: takoj Dsdpoxymfwefx Altjuw Skladiščna lokacija: Baden-Württemberg

Stanje: rabljeno, Leto izdelave: 2008, Rabljeni stroj Letnik: 2008 Oprema in tehnični podatki: Lepljenje maks. 8–55 mm Vklj. vrtljiv upravljalni pult HF-spajalni agregat z dvema motorjema Vklj. zamenljiv hitrogrelni bazen s teflonsko prevleko Vklj. elektronsko pozicioniranje pritisnih valjev Vklj. nagibni dvojni čelilni agregat Vklj. poravnalni rezkalni agregat Dedpfjw Nadgox Alteuw Vklj. robotsko vodeni posneti, radijski in kopirni agregat za vogale z nesting paketom Vklj. radijski strgalo z nesting paketom Vklj. strgalo za površine Vklj. utorni agregat Vklj. polirni agregat Vklj. razpršilna enota Razpoložljivost: kratkoročno Lokacija skladišča: Flörsheim

Stanje: rabljeno, Leto izdelave: 2010, Gebrauchtý stroj Rok výroby: 2010 s jednotkou pro srovnávání a zaoblování rohů Ovládací panel s LCD displejem a klávesnicí Srovnávací jednotka se 2 protiběžnými diamantovými frézami s přívodem hrany pro páskový a proužkový materiál s lepicím válcem a lepicí jednotkou s předem zastřihováním z role s přítlačnou sekcí s kapovací jednotkou s tažným kapem s jednotkou na zarovnání a frézování rádiusů Jednotka na zaoblování rohů pro čelní hrany manuální nastavení jednotek Tloušťka hrany: 0,4–5 mm Výška obrobku: 8–60 mm Minimální šířka obrobku: 70 mm Minimální délka obrobku: 140 mm Rychlost posuvu: 11 m/min Duedow I H Rkepfx Altow s rádiusovým stíracím agregátem s plošným stíračem s leštící jednotkou výsuvná podpěra obrobku Odsávací přípojka: 120 + 2 x 80 mm Hmotnost: cca 990 kg D x Š x V: 4550 x 1550 x 1100 mm Dostupnost: krátkodobě Sklad: Flörsheim

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Condition: Good (Machine has undergone extensive annual maintenance. Last serviced in March 2026!) Equipment: - iTronic – Adaptive pressure and glue dosing control; automatic, program-dependent fine adjustment - MOT SPS INFEED FENCE ADJUSTMENT - Automatic chain lubrication: intelligent automatic transport chain lubrication - Edge Control 19 controller - EL GRM graduated 400V50HZ 2.2KW V2 SPRINT 1329 PERFORMANCE 400V50HZ - Edge Control 19 controller with 18.5" touchscreen color display 16:9 - ECO MODE energy-saving mode This energy-saving mode is an automatic standby function - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, left rotation Air Stream System (HOLZ-HER / LEUCO patent) - Cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, right rotation Air Stream System (HOLZ-HER / LEUCO patent) - Edge feeding 1901 SYNCHRO Automatic transport of coil and strip materials - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 PLC MOTOR. SPRINT MOTORIZED - Spray system GM501 after pressure unit with lubricant Recommended for high gloss edges - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm), pneumatically swiveling 0/10° - Milling unit FR701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics - Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z=2+2 - Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z=2+2 - Profile milling unit FF701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z=4 Radius R = 2 mm, left rotation with CM technology Djdpfoy Hyl Tex Altjuw - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z=4 Radius R = 2 mm, right rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of tracing rollers - HW reversible blades for scraper holder R = 2.0 mm (2 pieces required) - Flat scraper FK701 With preliminary and final tracing for removing glue residue - Spray unit TR501 for infeed and outfeed (separating agent + cleaning agent) - Including nesting shoes below with dedicated spray unit Location: Hesse Availability: Approx. July 2026

Stanje: rabljeno, Leto izdelave: 2009, Used machine Year of manufacture: 2009 Dusdpfx Asv R Nk Ueltew Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial feed chain 1"1/4 Jointing milling unit FI-502 Gluing unit VC-710 Cut-off unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction/form milling units CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC with 2 positions Flat scraper RCC-701 Workpiece thickness: 10–65 mm Max. workpiece height with form milling unit (depending on profile): 35–65 mm Edge thickness (coil): 0.4–3 mm Edge thickness (strip material): 0.4–22 mm (depending on unit) Min. workpiece length: 140 mm Min. workpiece width (at length 140 mm): 85 mm Min. workpiece width (at length 250 mm): 50 mm Feed speeds: 10–14–18–20 m/min Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, jointing: 120 mm Glue tank capacity: approx. 3 kg Heating time at half fill level: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return conveyor shown in the images Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge infeed synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber pad. Digital counter for height adjustment - Direct adhesive application to the workpiece: leak-proof glue pot with glue supply from below and quick heat-up time after machine standstill - Flush trimming unit for workpiece front and rear edges, automatic workpiece sensing, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°, central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film tray Ø 800 mm Technical details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total installed load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm without film tray Ø 800 Duodpozc Agksfx Altew - Net weight: approx. 260 kg Availability: Short notice Location: Flörsheim