Stroj za robne trakove

Holz-Her Perfect 1421

Stanje: zelo dobro (rabljeno), Oprema: dozator, Električna nastavitev višine in kota žage; predrezilo. Bjdpfxew Ix Als Ag Teld Lahko nas pokličete ali pišete. Govorimo in pišemo v nemščini in ruščini. Sporočila lahko pošljete tudi v angleščini.

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment Blsdpfehlp D Nox Ag Ted - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Žagin list nagiben +/- 45° Dolžina sani 2800 mm Širina reza 1440 mm Moč motorja 7,5 kW Višina reza 150 mm Premer žaginega lista 450 mm Teža stroja pribl. 1200 kg Dimenzije D-Š-V 3,2 x 3,4 x 1,7 m Bedpfx Agoxcg Hge Told Ta formatna krožna žaga je v zelo dobrem stanju, takoj na voljo in jo je možno pod napetostjo preizkusiti pri prodajalcu. OPIS: - Pripravljena za predrezalno enoto - Formatna krožna žaga z nagibnim žaginim listom in predrezalno enoto za natančne reze v lesene materiale, pohištvo, pohištvo po meri, okenske okvirje, vrata, plošče, plastiko, kompozitne materiale, aluminij in drugo – CE standard.

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW Bledpswka S Ijfx Ag Tsd - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: zelo dobro (rabljeno), Panel dividing saw - horizontal - with rear lifting table Control: MCS Evolution Software Powered roller conveyors (approx. mm 4500 x 2200) Lifting table (mm) 4300 x 2200 Panel rotating device (for boards) through 90° No. 2 rear pushers (1 with clamping grippers) Program-controlled pusher division No. 10 grippers Max. cutting width (mm): 4300 Useful stroke of the loader (mm): 4300 Max. saw blade projection (mm): 135 Max. gripper opening (mm): 133 Bljdpfxjq Rfahs Ag Ted Scoring saw (max. saw diameter) mm: 20 Main saw (max. saw diameter / power) mm: 460 - 27 kW Variable saw carriage feed (m/min): 0 - 150 No. 4 front air cushion tables Total connected load (kW): 36 (approx.)

Stanje: dober (rabljeno), Leto izdelave: 1962, large band resaw with 1,250 mm wheel diameter with centre cutting device 45 kW motor Bedpfx Ajfnh T Ijg Tjld wheel width 120 mm with electric saw blade tensioning system top wheel removed for transport very good condition as it has seen little use, completely overhauled in 1997

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 RUWI Three-Spindle Under-table Router Professional equipment for the workshop This under-table router enables easy chamfering, edge rounding, profiling, grooving, sanding, and various other milling tasks, quickly delivering the desired result. Rapid tool changes are possible thanks to the conveniently accessible tool magazine. With the larger models, setup times are increasingly reduced. Costly and time-consuming fine adjustments and test milling are eliminated when equipped with all essential tools. The spindle can be continuously adjusted to the optimal working position. This model is ideally suited for workshop use and is often utilized for finishing. Made in Germany. Bjdpjrk Tqkjfx Ag Tsld Features and Technical Data: - High-quality construction - 3 tools available at any time - Electronic speed control prevents RPM fluctuations under load - Robust and high-performance motor - Motor with overload protection - Temperature monitoring via PTC resistor - Soft start and inrush current limiter - Reverse feed thread above ball bearings reduces ingress of dust and debris - Fast tool change - Dust extraction above and below the table top - 1x fine adjustment - Including stop ruler - Including mounting kit for table extension - Convenient tool change from above - BG and wood dust certified Technical Data: - Table size: 640 x 500 mm - Table height: 910 mm - Variable speed control: 8,000 – 25,000 rpm - Tools available: 3 - Milling stroke: 43 mm - Motor power: 1,050 watts for continuous industrial operation - Voltage: 230 V - Router spindle: 22 mm diameter - Collets: 8 mm (standard), optionally 6 mm, 6.35 mm, and 10 mm - Extraction port: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: Short-term Location: Solingen

Stanje: rabljeno, Leto izdelave: 2000, with electric height and tilt adjustment used, top condition, low hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-tested Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm tiltable up to 45° Bledpfx Aevxlq Hjg Tjd Scorer unit preparation Parallelogram guard Table extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - cutting angle - speed Extraction connection diameter: 120/80 mm Space requirement: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tested, functional equipment, used BIESSE Polymac edge bander, model LATO 38 Bedpfsuhm Adsx Ag Tsld - Glue pot - Guillotine - Front/rear trimming unit - 1 top/bottom tilting flush cutter - 2 top/bottom tilting flush cutters - Outfeed brushes Possibility to test the machine at our premises Machine available for viewing in our Cosne workshop Price includes loading onto truck

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, - Double miter circular saw ADS Type M - 2 saw heads Bodpfoucuhdex Ag Tsld - Max. cutting length 5000 mm