Zasukalni vretenasti rezkalni stroj nakup rabljenega (49)

Stanje: rabljeno, with spindle adjustment—vertical travel in the table Used Manufacturer: Schneider Model: SK2/8S Machine no.: 80002 Motor: 4.5 / 5.5 kW Electro-magnetic motor brake 6 speed settings: 3000 / 4000 / 5000 / 6000 / 8000 / 10000 rpm Forward/reverse rotation Spindle diameter: 30 mm Table extension: approx. 2 x 450 mm Iasdpfx Asvwf Icedkop Milling fence with fine adjustment Control panel mounted above Socket outlet for power feed unit Extraction port: Ø 100 / 120 mm Required space: approx. 2100 mm x 1300 mm x 1800 mm Total connected load: 5.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivered as seen, in as-is condition, without guarantee or warranty

Stanje: rabljeno, used, in good condition Manufacturer: Frommia Model: 705 P1 Machine no.: 119 Mobile Swivelling from 0 to 45° Motor with 2 speeds / pole-changeable 6 speed levels: 2,500 / 4,500 / 5,000 / 6,000 / 9,000 / 12,000 rpm Forward and reverse operation Table size: 1000 x 900 mm Spindle diameter: 30 mm Fence with fine adjustment Extraction port: D 120 mm Iasdpfovxr Rtox Adkop Space requirement: approx. 1000 mm x 900 mm x 1200 mm Weight: approx. 400 kg Location: 97447 Gerolzhofen, loaded free of charge, unpacked Transfer in as-seen condition No warranty or guarantee

Stanje: rabljeno, rabljeno, v dobrem stanju, malo uporabljeno Proizvajalec Bäuerle Tip SFM 2 Št. stroja B1533 nagib od -5° do +45° mehanska zavora 6 stopenj hitrosti: 2800/4500/5600/9000/6000/12000 vrt./min smer vrtenja desno-levo Velikost mize: 1100 mm x 900 mm Premer vretena: 30 mm Litoželezne čeljusti vodila Vodilo z natančnim nastavljanjem Priključek za odsesavanje D 120 mm Potrebna površina cca 1100 x 1100 x 1200 mm Teža cca 1000 kg Iedpoycxg Hsfx Adkeap Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v dejanskem stanju kot ogledano, brez garancije in jamstva

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, premer vretena: 30 mm, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 3.500 obr/min, dolžina mize: 2.070 mm, premer povezave za izpihovanje: 100 mm, vrsta nastavitve višine: mehanski, dolžina vretena za rezkanje: 130 mm, največja hitrost vretena: 10.000 obr/min, delovna dolžina vretena: 130 mm, Oprema: motorna zavora, – leto izdelave 2012 – avstrijska proizvodnja – vreteno nastavljivo v kotu 0° - 45° – pomična miza za čepovanje – oznaka CE TEHNIČNE SPECIFIKACIJE: – premer vretena: 30 mm – višina vretena: 130 mm – največji premer orodja, omogoča montažo velikih rezkalnih orodij: 230 mm – največji premer orodja pri delu pod kotom 45°: 125 mm – 4 hitrosti vrtenja: 3500 / 6500 / 8000 / 10000 obr/min – moč glavnega motorja: 5,5 kW – elektromotor z zavoro – dimenzije delovne mize (dolžina / širina): 780 x 970 mm – dimenzije pomične mize (dolžina / širina): 2070 x 350 mm Isdpfoycqiysx Adkjap – pomična miza "x-Roll" – ročna nastavitev višine – ročna nastavitev kota: 0° - 45° – sistem za hitro menjavo vretena – vodilo na pomični mizi – dodatna miza na pomični mizi – vrtenje levo / desno – premer odsesovalnih priključkov: 100 in 80 mm – transportne dimenzije (dolžina / širina / višina): 220 x 90 x 150 cm – teža: ~ 350 kg

Stanje: zelo dobro (rabljeno), Specification: * Condition – used * Manufacturer – CASADEI * Main motor – 4 kW * Spindle diameter – 45 mm * 4-speed belt drive, adjustable at 4/6/8/10 thousand rpm * Star-delta motor startup * Foot brake * Original paintwork * Overall dimensions – 110 x 90 x 120 cm (L x W x H) * Weight – approx. 500 kg Iodpfsiu Ahbjx Adksap Additional information: * Very good original technical and visual condition * The photos shown reflect the actual condition of the item offered for sale * Possibility to power up and inspect the machine on site * The price in the listing includes 23% VAT

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: AB/118120, TILTING SPINDLE MOULDER SCM MOD. T110I - CE - USED - Voltage: 400/50 Ijdpfx Aswrfhkedksap - Serial No.: AB/118120 - Year: 1998

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Machine assembled and operational Iaedou Tq Syjpfx Adkop

Stanje: novo, Leto izdelave: 2025, Martin Spindle Moulder T 27 Flex – double-sided tilting – Flexibility for today and tomorrow. Iaedor Hr D Nspfx Adkop Setting up a tilting spindle moulder is usually a big challenge. Not with the T27 Flex and its modern touchscreen control: thanks to the integrated tool compensation, you can set up even complex moulding profiles with a tilted spindle in no time at all. This is how you can efficiently utilize the large tilt range of 2 x 46° – allowing you to completely cater to your requirements. Additionally, the machine can be precisely customized to the individual needs of your operation. Equipment: T 27 Flex T 2711-a Digital display of fence jaw position in the controller T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex guard T 2742-a Integral fence T 2743-a Auto Lock fence jaw clamping system T 2790-La Console for feed stand attachment, left side The photo shows a sample machine only / feed and support are not included Included items are detailed in the description Location: Arriving at stock 54634 Bitburg – Available in two weeks –

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Motor s výkonom 7,5 kW, 400 V, 50 Hz, silne rebrovaný liatinový stôl s kruhmi na stole elektronické zariadenie na rozbeh a brzdenie elektrické nastavenie výšky a náklonu v rýchlom a pomalom režime presnosť na 1/10 mm, zdvih cca 145 mm, náklon +/- 45,5° 4 otáčky: 3 000/4 500/6 000/9 000 ot./min Frézovací doraz typ 2601 Efficient s čeľusťami multiplex definovaná frézovacia vreteno Ø 30 mm s rýchloupínacou maticou „fix“ ľavý/pravý chod, zásuvka na stroji, oblúkový bezpečnostný kryt Typ TAPOA Hofmann „Centrex“. Lakovanie: sivobiela/signalizovaná modrá rozmer stola 2 000 x 815 mm výsuvná podpera Ťažký frézovací doraz typ 2620 celkové nastavenie pomocou ručného kolesa s ukazovateľom vrátane možnosti prepnutia na nulovú hodnotu nástroja. Digitálny displej pre individuálne nastavenie čeľustí. Vrátane rýchloupínacieho systému pre čeľuste dorazu liatinové čeľuste dorazu bezpečnostné pravítka a výplňová doska vymeniteľné vreteno MK5 Iedpfex Ey S Rox Adkoap podávač s 4 valcami, 8 rýchlosti s podstavcom ovládací panel hore priehradka na náradie

Stanje: skoraj kot novo (rabljeno), For sale is a used Felder spindle moulder F-900 Z featuring a tenoning and slotting table with a length of 1300 mm. The machine has only been used as a display model in our showroom and is therefore in like-new condition. Technical specifications: - 5 spindle speeds - Spindle tiltable from 90° to 45° - Cutter fence for tooling up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table 1300 mm - Electrically height-adjustable and tiltable "PowerDrive" - Motor power: 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 Iaedpfx Adew Hfd Iekjp The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Info Tel. 06244-20299. Related keywords: spindle moulder, milling machine, milling Reference: R-A0117

Stanje: dober (rabljeno), sander composed of: first unit – electronic cross-belt second unit – electronic pad-belt third unit – electronic super-finishing pad-belt machine equipped with inverter for belt drives and vacuum hold-down for small parts Isdpfet N Tfcex Adksap machine designed for line integration

Stanje: novo, Table size 1,200 x 780 mm Motor power 7.5 kW Spindle diameter 30 mm Fimal TX 160 tilting spindle moulder ----- Partnership Edition Offer: - Fimal TX 160 (7.5 kW) - 10 HP motor - Forward and reverse run - Upper control panel with electronic digital display for spindle height and tilt ----- General Technical Manufacturer Description: The FIMAL TX160 sets new standards in modern woodworking. With a precise tilting spindle, innovative control technologies, and a robust construction, it offers maximum stability and flexibility for demanding milling operations. Thanks to the stepless tilting adjustment, precise digital control, and powerful motorization, the TX160 is ideal for joineries, furniture makers, and industrial manufacturing. - Milling fence incl. parallel adjustment with handwheel and digital display, handwheel adjustment with digital display for the front fence jaw, electric travel tilting device for the entire fence, quick-release lever for fixing aluminum fence jaws and pressure device - Curved milling fence - Electromotive spindle height adjustment incl. digital display and decimal increment setting - Table insert adjustable to the diameter of the milling tool (instead of table insert rings) - Indicator lights for set milling speed - Electrical system and safety equipment according to CE standards - Table dimensions: 1,200 x 780 mm - Milling spindle d= 30 mm, H= 140 mm - Milling speeds: 1500/3000/4500/6000/8000/10000 rpm - Max. tool size under table: d= 320 mm, H= 50 mm - Motor: 5.5 kW / 7.5 HP / 50 Hz - Noise level according to EN 27960: 83.9 – 87.3 dB(A) - Spindle tilt: -45° to +45° - Electromotive spindle tilt adjustment incl. electronic display and decimal increment setting - Max. spindle height at 30 or 35 mm diameter: 140 mm - Max. spindle height at 40 or 50 mm diameter: 180 mm - Total spindle stroke: 220 mm - Table opening: 340 mm ----- Price for the above-mentioned machine on request! ----- (Technical specifications according to manufacturer – subject to change!) All prices net. Plus statutory VAT. Iajdpfxjxyafqj Adkop Photos show the same model. Original images not yet available.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), vrsta nastavitve višine: električni, Tilting Spindle Moulder HOFMANN TFS 107 Standard Equipment: - 7.5 kW motor, 400 V, 50 Hz - Table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings - Electronic soft start and brake device - Electric height and tilt adjustment for rapid and fine feed, accurate to 0.1 mm, height adjustment approx. 145 mm - Tilt adjustment +/- 45.5° Iasdeu Nz Ndopfx Adkep - 4 spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm - Milling fence, type 2601 Efficient, with multiplex fence jaws - Fixed spindle, Ø 30 mm with quick-release nut "fix" - Forward/reverse rotation, machine socket, arc guard type TAPOA, Hofmann "Centrex" - Paint finish: grey white/signal blue Electrical connection: Motor power: 7.5 kW – Minimum fuse (A): slow 30 Additional equipment installed on this machine: - Table size 2,000 x 815 mm with extendable support (480 mm extension) instead of standard table - Infinitely variable spindle speed control for TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor (replacing standard soft start motor) - HOFMANN spindle fence type 2620 instead of standard fence 2601 Efficient. Total adjustment via handwheel with display, including switchover to tooling zero point. Digital display for individual fence jaw adjustment. Includes quick-release system for fence jaws - 2 cast iron fence jaws, 500/500 mm - Guide rails and rebate board, consisting of 5 rulers, 1 rebate board, 10 guide pads - Raised control panel - Tool compartment for TFS 107 (only possible with raised control panel) - Operating manual TFS 107, German

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Tilting spindle moulder / Table milling machine / Wood milling machine / Joiner's spindle moulder CASOLIN Model: F45 Year of manufacture: 1996 5 adjustable speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital display for the tilt angle Spindle diameter: 30 mm Iodpfxsx Dmnaj Adkjap Matching power feeds can be found in my other listings. Condition: see pictures, or refer to the item description. Parts can also be collected in person. All dimensions are approximate. All details provided to the best of my knowledge but without guarantee. Subject to prior sale. The items can be collected by the buyer or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. The listed price is a net amount plus VAT. An invoice including VAT will be issued. Warranty basis: Due to wear and tear on used parts, the items are fundamentally offered as defective — for spare parts only, and sold exclusively to traders. By placing a bid, the buyer accepts this as the basis of the sales contract.

Stanje: rabljeno, Table size: 2500 x 780 mm Motor power: 7.5 kW Spindle diameter: as required Speed range: 1,500 – 10,000 rpm FIMAL Tilting Spindle Moulder TX 160 L --- 4-axis control: spindle height, tilting, parallel adjustment of the fence, and adjustment of the motorized table insert, incl. upper control panel with automatic star-delta starting for the spindle motor. Touchscreen, tool management, and program control based on Windows. Fence including controlled parallel adjustment (1st axis), manual adjustment with digital readout for the front fence jaw, electric swing-away device for the entire fence, quick-release lever for fixation, aluminum fence jaws, and pressure device. Controlled electro-motorized spindle height adjustment (2nd axis). Controlled electro-motorized spindle tilting adjustment (3rd axis): -45° to +45°. Table insert adjustable according to cutter diameter (instead of table insert rings). The table insert is motorized (4th axis). Milling speeds: 1500/3000/4500/6000/8000/10000 rpm (displayed on touchscreen). Electrics and safety devices in accordance with CE standards. Table dimensions: 1,200 x 780 mm. Max. tool size under table: d = 320 mm, H = 50 mm. Motor: 7.5 kW / 10 HP / 50 Hz. Version "L" with table extension on both sides and pull-out workpiece support. With emergency stop button. Reversible operation (left/right) according to CE standards. Curved fence for moulding. Option at extra cost: 4-roller power feed Type VSA 2048 L Consistent feed speed without power loss Reversible operation (left/right) Includes stand, can be individually swiveled and adjusted for horizontal and vertical use Eight speeds available, speed selection via switch and change gear Extra cost: 1,149.00 Euro Shipping costs, including installation and 4 hours of instruction: Extra cost: 1,400.00 Euro Iajdpfx Ajxpi D Isdksp (technical data as per manufacturer - subject to change without notice)

Stanje: zelo dobro (rabljeno), Spodnji vretenasti rezkalni stroj Panhans 240A Premer vretena: 30 mm Dolžina vretena: 130 mm Spremenljiva hitrost vretena: 3000/4500/6000/9000 obr/min Elektronsko nastavljanje višine vretena Elektronsko nastavljanje omejevalnikov Elektronsko nastavljanje kota Iajdpfx Aoxg Iz Hodksp Štirivaljni potisni sistem SCM

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine -Spindle adjustment: height and angle -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg Ijdpfsh Nvyzex Adkoap

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM), vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, premer vretena: 30 mm, vrtilni razpon: 45 °, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 10.000 obr/min, širina mize: 800 mm, dolžina mize: 2.000 mm, skupna dolžina: 2.000 mm, skupna širina: 1.200 mm, skupna višina: 860 mm, skupna masa: 920 kg, teža obdelovanca (maks.): 1.060 kg, višina vpenjanja: 125 mm, vrsta nastavitve višine: električni, širina odpiranja: 370 mm, največja hitrost vretena: 10.000 obr/min, hitrost vretena (min.): 1.500 obr/min, višina mize: 860 mm, Machine no.: 128-29225 Type: TFS 2000 Year of manufacture: 1999. Motor: 7.5 kW Suva matic Iasdjvn Rb Ajpfx Adkjp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), premer vretena: 40 mm, skupna masa: 1.500 kg, dolžina vretena za rezkanje: 150 mm, Double-sided swivel spindle mounting with 2 robust segment guides, column in modern steel construction, table in heavy-duty, high-ribbed cast design, interchangeable milling spindle, three-phase motor with 4 speeds, electric height and swivel adjustment in both rapid and fine feed modes with electronic digital display, incremental measurement switching during height adjustment, milling fence with fine adjustment and metal fence jaws as well as replaceable aluminum anti-splinter inserts, extraction ports at the milling fence and below the table, each 120 mm diameter, minimum extraction speed at the extraction port 20 m/s, rotatable table insert, interlocked rotary switch for forward and reverse operation, lockable main switch, cam switch, automatic motor brake. Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW Iasdpfx Adswcpqqokop Milling spindle holder: MK 5 Speeds: 3000/4500/6000/9000 rpm Swivel range of the milling spindle: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, incl. extendable frame support Stepless 4-roller feed unit 2-axis control Milling spindle with 40 mm diameter and 150 mm length

Stanje: dober (rabljeno), Leto izdelave: 2005, - 5 wrzecion (5 spindles) - Minimalna szerokość robocza: 10 mm (Min. working width: 10 mm) - Maksymalna grubość robocza: 120 mm (Max. working thickness: 120 mm) - Napęd o zmiennej prędkości posuwu: 5–29 m/min (Variable feed speed drive: 5–29 m/min) Iasdpfx Ajiu E Rtedkjp - Prędkość obrotowa wrzecion roboczych: 6,000 obr./min (Spindle working speed: 6,000 rpm) - Średnica wrzeciona roboczego: 40 mm (Working spindle diameter: 40 mm) - Maksymalna średnica narzędzi: 180 mm (Max. tool diameter: 180 mm) - Docisk pneumatyczny (Pneumatic pressure system) - Głowice wychylane pod kątem (Tilting heads) Kolejność głowic (Spindle sequence): 1. Prawa (Right) 2. Prawa (Right) 3. Lewa (Left) 4. Lewa (Left) 5. Lewa (Left) Moc zainstalowana: 18 kW / 39 A (Installed power: 18 kW / 39 A)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Motor 7,35 kW 5 hitrosti 3500-10000 min–1 Nagib vretena rezkalnika 0-45° Dolžina pomične mize 1300 mm električno nastavljanje višine in nagiba Iaedpfxoxbq Ulo Adkep Električno nastavljiv rezkalni omejevalnik Rezkalni omejevalnik popolnoma zložljiv Maksimalni premer orodja 250 mm Aluminijaste čeljusti omejevalnika 550 mm Centrex zaščita za rezkanje Teža cca. 700 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Connection rating 380V 11kW 30A Electric tilting -5° to +45° Electric height adjustment Digital display Iedpfoub S U Sox Adkeap Forward/reverse rotation Speeds 3000/4500/6000/9000 rpm Fence with Siko counter Spindle diameter 30 mm Table size 1350 x 800 mm Overhead control panel Extraction connection 2x120 mm

Stanje: dober (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Tilting Spindle Moulder SAC TS 145 Manufacturer: SAC (Süeri Alfredo SpA) Year of manufacture: 1988 S/N 8831 Robust electric height- and tilt-adjustable spindle moulder with powerful motor (7.5 kW), variable speeds, and comprehensive features. Technical Specifications Spindle diameter: 30 mm Spindle stroke: approx. 150 mm Tilting range: –5° to +45° Height adjustment: electric, with digital readout Tilting adjustment: electric, with digital readout Fence adjustment: manual, with scale indicator Spindle speeds: variable—3,000; 4,500; 6,000; 8,000; 10,000 rpm Motor power: 7.5 kW Motor brake: automatic Extraction ports: 2 × 120 mm Ø (other options also available: 100–110 mm) Single-sided table extensions Right side: sliding/mortising table / additional accessories including workpiece clamp and adjustable end stop, angle-adjustable Dimensions & Weight Table size: approx. 1,200 × 820 mm Overall dimensions approx.: 2,200–2,400 mm (L) × 1,100–1,400 mm (W) × approx. 1,500 mm (H) Iajdowt A Dxspfx Adkep Weight: approx. 1,100 kg

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), HOFMANN Tilting Spindle Moulder TFS 1200 Year of manufacture: 2004 S/N: 127-01323 Manufacturer: Hofmann Bad Windsheim From a vocational training facility, in excellent condition Ijdpfx Adem Tg Ecskjap Manual height and tilt adjustment for fine tuning Analog display for height adjustment, height adjustment range 125 mm Table size 1200 x 820 mm with table extension 200 x 820 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Milling spindle diameter: 30 mm, milling arbor MK5 Motor: 4.7 kW / 6.3 HP Extraction port diameter: 120 mm Side roller table with eccentric hold-down and adjustable mitre fence Height adjustable with hand wheel CE mark Weight: 1300 kg