Univerzalne konvencionalne rezkalne stroje za orodja, X-hod 0–399 mm nakup rabljenega (143)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Univerzalna frezalna strojnica Deckel FP1 s 3-osnim aktivnim digitalnim prikazovalnikom TNC 113 Heidenhain in brezstopenjskim podajanjem, v zelo dobrem STANJU, z dodatno opremo, v skladu s standardi CE. Tehnični podatki: Crsdpfxozl Ebbo Afwsi >> Letnik izdelave 1992, številka stroja 2102-7007 >> Fiksna nagibna miza >> Število vrtljajev: 40 - 2000 vrt/min >> Brezstopenjsko podajanje v 3 osi >> Hitri hod v 3 osi >> Moč pogona: 1,5 / 1,9 kW >> Zavora vretena >> Hodi osi X/Y/Z: 300/160/340 mm >> Navpična frezalna glava, pomična za 100 mm na nosilcu vretena >> Vertikalni in horizontalni konus - SK40 >> Sistem vpenjanja M16 >> Teža približno 800 kg Dodatna oprema in izvedba: >> 3-osni digitalni prikazovalnik Heidenhain TNC113 >> Sistem za hlajenje >> Strojniška luč >> Navodila za uporabo, seznam rezervnih delov >> Vpenjalne glave za orodja, strojna sponka, protinadzorni element O stroju: Ponujamo univerzalno frezalno strojnico Deckel FP1 v zelo dobrem stanju, v skladu s standardi CE. Stroj ima zelo malo zračnosti in vsa vretena se enostavno premikajo. Tudi pri najvišjih obratih stroj deluje zelo mirno. Posebnost je, da je omarica stroja povezana z vtičnico. To olajša tudi transport stroja. Pri tem novejšem modelu FP1 je podajanje v treh osi brezstopenjsko nastavljivo, poleg tega ima stroj hitri hod v teh osi. Velika prednost je aktivni 3-osni digitalni prikazovalnik. S tem Heidenhainovim sistemom numeričnega nadzora lahko vnesete mere, na katere se bo stroj samodejno nastavil. FP1 je bila v izobraževalnem podjetju, kjer so jo uporabljali le občasno. Izvedena je bila menjava olja. Stroj je bil mehansko in električno preverjen. Zahvaljujoč digitalnemu prikazovalniku Heidenhain je delo lažje in še natančnejše. Izkoristite priložnost in si oglejte in preizkusite ta stroj na licu mesta.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Univerzalni rezkalni stroj Deckel FP1 z digitalnim prikazovalnikom za 3 osi K&C, brezstopenjska podaja, svetlo siva barva, v skladu s standardi CE, odlično stanje. Tehnični podatki: >> Letnik proizvodnje 1980, št. stroja 2101-1423 >> Trdna nagibna miza >> Število vrtljajev: 40 - 2000 vrt/min >> Brezstopenjska podaja po dveh osi >> Moč pogona: 1,5 / 1,9 kW >> Zavora vretena >> Hitri hod >> Hodi po osi X/Y/Z: 300/160/340 mm >> Navpična rezkalna glava, pomična po nosilcu vretena (100 mm) >> Navpični in vodoravni vpenjalni stožci - SK40 >> Sistem vpenjanja M16 >> Teža približno 700 kg Dodatna oprema in izvedba: >> Digitalni prikazovalnik za 3 osi K&C, novo nameščen z garancijo proizvajalca in navodilom za uporabo. Prikazovalnik: nastavljanje referenčnih in nulnih točk, vnašanje koordinat, preklapljanje med mm in palci, absolutne ali inkrementalne koordinate, funkcijo kroga, vrstice lukenj, funkcije rezkanja po krogu itd. >> Sistem za hlajenje >> Luč za stroj >> Navodila za uporabo, seznam rezervnih delov Crsdpfozl Uz Dox Afwji >> Vpenjalne priprave, primež, proti-primež O stroju: Ponujamo univerzalen rezkalni stroj Deckel FP1, v skladu s standardi CE, v zelo dobrem stanju. Stroj ima zelo malo zračnosti in vsa vretena se lahko premikajo z lahkoto. Vsi zložljivi pokrovi so novi. Pri tem novejšem modelu FP1 je podaja po dveh osi brezstopenjsko nastavljiva, stroj pa ima tudi hitri hod. Izvedena je bila menjava olja. Stroj je bil mehansko in električno pregledan. Nova digitalna enota podjetja K&C olajša delo in omogoča še natančnejše rezultate. Izkoristite priložnost in stroj oglejte ter preizkusite na licu mesta.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, A Deckel FP2 universal tool milling machine, completely overhauled in 2019, is available. Travel range X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Codpfxovf Iy De Afwori

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Krmiljenje 3 osi, aktivno krmiljenje poti Heidenhain TNC 123 Število obratov 40 - 2000 min⁻¹, geometrijsko stopnjeni direktni pogon s 16 prestavami za največji navor / rezkalno moč Pomik 5 do 500 mm/min, brezstopenjsko nastavljiv Hitri pomik 1,2 m/min Cjdpfx Afoyg I Nfjweri Izvlečna puša, vertikalni hod 60 mm, SK40, privijalni navoj M16 Osi X/Y/Z: 300/160/340 mm Nagibna miza 600 x 210 mm, največja obremenitev 200 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed – Excellent Condition, CE Compliant Technical Data: - Year of manufacture: 1990 Machine no.: 2102-5046 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed in 3 axes - Rapid traverse in 3 axes - Drive power: 1.5 / 1.9 kW Csdpezbb E Aefx Afwjri - Spindle brake - Travel (X/Y/Z): 300/160/340 mm - Vertical milling head adjustable on spindle carrier by 100mm - Vertical quill and horizontal quill – SK40 - Drawbar system S20x2 - Weight: approx. 800 kg Accessories and Equipment: - 3-Axis Heidenhain TNC 113 Digital Readout - Coolant system - Machine lamp - Operating manual & spare parts list About the machine: Offered here is a universal milling machine Deckel FP1, CE compliant and in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available on them. A major advantage is the active 3-axis digital readout. With the Heidenhain TNC 113 control, you can input dimensions and let the machine automatically travel to those positions. This FP1 was used in a training workshop and was only operated occasionally. Oil has been changed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes working easier and more precise. Take the opportunity to inspect and test the machine on site under power.

Leto izdelave: 1981, stanje: dober (rabljeno), Deckel FP1 2-axis universal milling machine with Heidenhain digital readout and tilting/swivel table. SK 40 spindle taper. Machine is in good, fully operational condition. Can be demonstrated under power by prior arrangement. Crsdpehg Embsfx Afwsi

Stanje: delavnici obnovljeno (rabljeno), dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, Updated Machineseeker Description (with Axis Travel) Deckel FP1 Aktiv – 3 Axes – Partially Refurbished – Immediately Operational Offered is a Deckel FP1 Aktiv in technically inspected, partially refurbished condition. The machine has been professionally reconditioned and is in a dependable, ready-to-use state. Ideally suited for workshops, toolmaking, training environments, as well as prototype and small-batch production. This is not an unchecked used machine, but a technically overhauled toolroom milling machine with a clearly defined scope of delivery and reliable lead time. Technical Data and Features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Infinitely variable feed on all 3 axes Coolant system Brake motor Rigid angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of Refurbishment Workshop-tested and partially refurbished Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all settings as required Replacement of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial refurbishment provides an optimal balance between operational safety, cost-efficiency, and availability. A full regrinding of the guideways was not carried out, as there was no technical necessity for it. Scope of Delivery Machine loaded free of charge Credpsx Tdy Iofx Afwji Delivery time approx. 12 weeks

Stanje: rabljeno, Velikost mize 630 x 200 mm X/Y/Z - 250/200/300 mm Vrtljaji vretena 2000 obr/min Stožčasti vretena MK 4 Samodejni podajalnik in hitro premikanje v vse smeri Opremljeno z: Codpfsyaai Rox Afwjri Nagibna miza 500 x 200 mm Vrtalna glava s 60 mm hoda Okrogla miza, premer 250 mm Okrogla miza z delilnim kolescem Delilna glava Primež 140 mm Držalo za napenjalne klešče z raznimi kleščami Črpalka za hladilno tekočino

Stanje: dober (rabljeno), Please read the technical specifications carefully. If you consider this machine as a potential investment, we kindly request your full identification including a correct telephone number and email address when submitting an offer. Codpfoxyc Tkox Afwsri DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed, X/Z-axis: 5 – 500 mm/min Feed rate adjustment: stepless Rapid traverse X/Z-axis: 1,200 mm/min Feed, Y-axis: manual Fixed angle table: 600 x 210 mm Tilting vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change without notice! Features: - For horizontal machining, the milling head is swivelled 90 degrees and pushed back. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z-axis - The machine was partially overhauled by a specialist company several years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro-cooling/lubrication system - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: Good to very good, from a training facility Available from March 2026

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, in Excellent Condition, CE Compliant Technical Data: >> Year of manufacture: 1992, Machine No. 2102-6209 >> Fixed angle table (freshly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle slide, adjustable by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp Cedpfx Ajxdi Ivjfweri >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, CE compliant, in very good condition. The machine exhibits minimal backlash and all spindles move smoothly. The milling machine operates very quietly even at maximum speeds. A special feature is that the electrical cabinet is connected to the machine via a plug, which makes transportation easier. In this newer FP1 model, the feed on all three axes is infinitely variable, and there is also rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can enter the dimensions and the machine will automatically approach them. This FP1 was used in a training workshop and was only occasionally operated. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout facilitates your work and delivers even higher accuracy. Take advantage of the opportunity to view and test this machine on site under power.

Stanje: dober (rabljeno), Deckel FP1 frezarka, wyprodukowana w Niemczech przez Friedrich Deckel AG, Monachium. Maszyna jest sprawna i w pełni operacyjna. W celu uzyskania dodatkowych informacji prosimy o kontakt. Cedpfx Afew Amaijwjri

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), Macmon M 100 D tool milling machine with 3-axis Fagor digital readout, from training department. Features a fixed table and SK 40 spindle taper. Accessories include various collets and milling arbors. The machine is in very good, ready-to-use condition and can be demonstrated under power by appointment. Crodpfshtfubjx Afwoi

Stanje: rabljeno, Leto izdelave: 1987, FRIDRICH DECKEL, VISOKONATANČNI STROJ ZA OBSTRANJEVANJE MATERIALA Credezv Eg Sopfx Afwsi MODEL: FP4M LETNIK: približno 1987 DIGITALNI OBRATOMER HEIDENHAIN BREZHIBNO STANJE

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Cjdpfjpy Eldex Afweri Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: dober (rabljeno), Acera F3 Rezkalni stroj vrhunske kakovosti. Motor in menjalnik delujeta brezhibno. Ni nobene dodatne opreme razen tiste, ki je vidna na slikah. Lahko se naloži na europrikolico in se organizira prevoz po vsej Evropi. Crodpfor Ixpdex Afwei

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Cedpfx Aox It Rxefwjri Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Credpfxjx S Edlo Afwji Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: rabljeno, Leto izdelave: 2001, x-potek 300 mm y-potek 200 mm Csdpfx Aozczdhsfweri z-potek 350 mm Pritrdilna površina mize 600 x 200 mm Vpenjalo vretena SK 30 Obrati vretena 80 - 2200 min⁻¹ Pomiki X-os 50 - 550 mm/min Pomiki Y-os 50 - 550 mm/min Hitri pomik 1500 mm/min Hod pinole 45 mm Navpična glava nagibna +/- 90° Skupna potrebna moč 1,4 kW Teža stroja ca. 500 kg Dimenzije stroja D x Š x V 1,50 x 1,20 x 1,60 m Oprema: digitalno odčitavanje na 3 oseh HEIDENHAIN, fiksna miza, nagibna navpična glava z izvlečno pinolo, nasprotni ležaj, več različnih kratkih in dolgih rezkalnih trnov, hladilna naprava

Stanje: rabljeno, Tehnični podatki Številka artikla M100001418 Cedpfjzfpicex Afwori Upravljanje: CNC brez mehanskih ročnih koles Krmiljenje: CNC tirno krmiljenje DECKEL Contour 3 Hitrost vrtenja: 63 - 3150 min⁻¹ Podajalna hitrost: 2-3000 mm/min, brezstopenjsko nastavljiva Hitri pomik: 3000 mm/min Moč: 4,4 kW Vretenski tulec: Izvlečni vertikalni tulec 80 mm SK40 z vpenjalnim sistemom DIN 2080 ali DIN 69872 Osi: X/Y/Z 485/385/380 mm Kotna miza: Fiksna kotna miza 800 x 460 mm, max. obremenitev 400 kg Hidromehanski vpenjalni sistem SK40 z zateznim vijakom po DIN 2080 ali DIN 69872 Vertikalno in horizontalno vreteno Rezkalna glava ročno vrtljiva +/- 90° Programiranje: Deckel Contour 3 – dialogno vodeno programiranje z različnimi obdelovalnimi cikli.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Univerzalni orodjarski rezkalni stroj Znamka: DECKEL Model: FP 2 Aktiv Leto izdelave: 1987 - obnovljen, na novo prebarvan z novo elektroinštalacijo stroja RAL7035 svetlo siva / RAL7012 bazaltno siva RAL5008 sivo-modra Št. stroja: 2202-11579 Tip rezkalne glave: 2271 Številka rezkalne glave: 300-3606 z garancijo geometrijski prevzem s preizkusnim protokolom Dodatna oprema: - 3-osni aktivni digitalni prikaz HEIDENHAIN TNC 113 - Fiksna miza 660 x 380 mm (T-utor: 12 mm) - Vertikalna rezkalna glava SK 40 z vlečnim navojem S 20 x 2 - Centralno mazanje, ročno upravljano - Hladilna naprava - Navodila za uporabo - rabljeno, kot je vidno - Credpfxsx A Eddj Afwei

Stanje: rabljeno, Leto izdelave: 1999, x-gib: 290 mm y-gib: 170 mm z-gib: 310 mm Površina za namestitev na mizo: 600 x 210 mm Crjdpswngkrofx Afwei Vretenčna konica: SK 40 Število vrtljajev vretena: 50 - 2600 vrt/min Podi: 9 - 450 mm/min Poteza vretenčne konice: 70 mm Dimenzije stroja (D x Š x V): 1,35 x 1,05 x 1,63 m Skupna poraba električne energije: 5,5 kW Masa stroja: približno 720 kg - Stroj iz učilnice - Dodatna oprema: fiksna miza, vertikalna glava z izvlečno vretenčno konico, digitalni prikazovalnik na 3 osi HEIDENHAIN, različna kratka vretena, naprava za hlajenje

Stanje: dober (rabljeno), Vpenjalna površina fiksne kotne mize: 195 x 605 mm Avtomatski in ročni vzdolžni/navpični pomik mize: 290/300 / 330/340 mm Ročni prečni pomik vretenaste glave: 150 mm Vpenjalo vretena: ISA 40 16 hitrosti vretena: 40 - 2000 obr/min 16 pomikov: 10 - 500 mm/min Pogon vretena: 380 V, 1/1,4 kW Teža ca.: 660 kg Crsdjyvgf Rspfx Afwoi Potrebna postavitvena površina: 1200 x 900 x 1570 mm

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Codpjr En Dyefx Afweri Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: rabljeno, Deckel rezkalni stroj FP1 s 3-osnim digitalnim prikazovalnikom 380V 120-1900 vrt./min Pomik osi X: 300 mm Pomik osi Y: 150 mm Crsdoy Ddd Ujpfx Afwei Pomik osi Z: 340 mm Vpenjalo za orodje: MK 4 z vpenjalnim navojem S 20 x 2 Tip rezkalne glave: vertikalna rezkalna glava Tip mize: fiksna miza Vpenjalna površina mize: 600 x 210 mm Velikost T-utora: 12 mm Pomik osi X: 290 mm Pomik osi Y: 150 mm Pomik osi Z: 330 mm Teža: 700 kg Deckel rezkalni stroj FP1

Stanje: rabljeno, Leto izdelave: 1973, x-axis travel: 290 mm y-axis travel: 170 mm z-axis travel: 310 mm Table clamping surface: 600 x 215 mm Spindle taper: SK 40 Spindle speeds: 50 - 2500 rpm Feeds: 9 - 450 mm/min Quill stroke: 70 mm Total power requirement: 1.8 kW Machine weight approx.: 860 kg Machine dimensions (L x W x H): 1.06 x 1.05 x 1.33 m Codpfxotqqn Re Afwjri Accessories: Vertical head with extendable quill, fixed table, counter bearing, coolant system