Univerzalne konvencionalne rezkalne stroje za orodja, X-hod 0–399 mm nakup rabljenega (117)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed Angle Table >> Spindle Speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle mount, adjustable by 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital readout >> Centralized electric lubrication >> Coolant system >> Operating manual and spare parts diagram Details about the Machine: Offered is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed in all three axes, as well as rapid traverse in these directions. A major benefit is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter target dimensions, and the machine will automatically move to them. This FP1 was used in a training workshop where it saw only occasional use. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this outstanding machine under power on site. Hjdpfxjxu E R Ie Ab Eofd The machine is available immediately.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, Hsdpfopy Eldox Ab Eefd We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: zelo dobro (rabljeno), Orodjarski rezkalni stroj DECKEL FP 2 z novo 3-osno digitalno odmero iz laboratorijskega obrata - Dobro ohranjen originalni stanje Hfjdpsx Hahujfx Ab Ejd - Pomiki X/Y/Z 400x200x400mm - Digitalni prikazovalnik 3 osi "NOVO" - Kotna miza – vpenjalna površina mize 700x350mm - Območje vrtljajev 40 - 2000 vrt/min - Samodejni podajalniki / hitri podajalniki v vseh treh oseh - Orodno držalo ISO 40 - Navpična – vodoravna rezkalna oprema - Navpična glava z možnostjo nagiba in vrtalno pinolo - Naprava za hlajenje - Dokumentacija Dimenzije: D x Š x V 1,5 x 1,7 x 1,8 metra / Teža 1500kg Možnost napak in vnosnih nepravilnosti pridržana.

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Hfjdpfxer En Dye Ab Eod Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 4038, potovalna razdalja osi X: 290 mm, pomik osi Y: 150 mm, pomik po osi Z: 330 mm, montažni premer: 40 mm, dolžina mize: 600 mm, širina mize: 210 mm, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, skupna masa: 700 kg, CONDITION & NOTES: Hsdpfx Ajwxpxmjb Ejfd - This is an active path-controlled tool milling machine

Leto izdelave: 1992, stanje: novo,

Stanje: dober (rabljeno), Orodjarski rezkalni stroj DECKEL FP 1 -Pomiki X/Y/Z: 245-150-340 mm -Brez vertikalne glave / stroj je bil uporabljen samo za horizontalna rezkalna dela -Območje obratov: 95 - 1900 obr/min -Delična glava -Avtomatski pomiki v oseh X in Y -Različne vpenjalne klešče + nosilci za orodje -Dokumentacija Hfjdpex A D Nfsfx Ab Esd Dimenzije: DxŠxV: 1,1x0,9x1,6 metra / Teža: 600 kg Možni so tiskarski ali vnosni popravki.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Odlično ohranjeni 5-osni brusilni stroj za orodja naprodaj zaradi neizkoriščenosti! Hfjdsxw Sxkspfx Ab Ejd

Leto izdelave: 1981, stanje: dober (rabljeno), Deckel FP1 2-axis universal milling machine with Heidenhain digital readout and tilting/swivel table. SK 40 spindle taper. Machine is in good, fully operational condition. Can be demonstrated under power by prior arrangement. Hedpfxehg Embs Ab Esfd

Leto izdelave: 1980, stanje: dober (rabljeno), Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK 40 spindle taper. Good operational condition, can be demonstrated under power by prior arrangement. Hfjdpfx Abod Id N Re Eed

Leto izdelave: 1997, stanje: dober (rabljeno), Macmon M 100 RE tool milling machine with 3-axis Heidenhain digital readout from the training department, rigid table, SK 40 spindle taper. Accessories: electric spindle guard, various collets and milling arbors. Good, ready-to-use condition, can be demonstrated under power by appointment. Hfedpfehgmmzox Ab Ejd

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), Macmon M 100 D tool milling machine with 3-axis Fagor digital readout, from training department. Features a fixed table and SK 40 spindle taper. Accessories include various collets and milling arbors. The machine is in very good, ready-to-use condition and can be demonstrated under power by appointment. Hfedpfjhtfubex Ab Ejd

Stanje: pripravljen za uporabo (rabljen), Deckel FP 1 Milling Machine Travel distance X-axis: 300 mm Travel distance Y-axis: 160 mm Travel distance Z-axis: 340 mm Spindle taper: SK 40 with drawbar thread Feed X-axis: 290 mm Weight: approx. 940 kg (with pallet) Space requirement: 1300 mm x 1200 mm x 1800 mm (L x W x H) Dimensions with pallet: 1400 mm x 1400 mm x 2000 mm (L x W x H) You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop and check out our other offers as well. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Hsdpfx Abouvih Hj Esfd Deviations from the technical data and errors in the item description can occur and are reserved.

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 spindle taper, S20x2 spindle mounting. Good, fully operational condition; can be demonstrated under power by prior arrangement. Hsdpfx Abjuvgnqo Eefd

Stanje: rabljeno, Velikost mize 630 x 200 mm X/Y/Z - 250/200/300 mm Vrtljaji vretena 2000 obr/min Hfsdpfxjyaai Ro Ab Ejd Stožčasti vretena MK 4 Samodejni podajalnik in hitro premikanje v vse smeri Opremljeno z: Nagibna miza 500 x 200 mm Vrtalna glava s 60 mm hoda Okrogla miza, premer 250 mm Okrogla miza z delilnim kolescem Delilna glava Primež 140 mm Držalo za napenjalne klešče z raznimi kleščami Črpalka za hladilno tekočino

Stanje: rabljeno, številka stroja/vozila: 28670, x-travel: approx. 400 mm y-travel: 150 mm z-travel: 340 mm Hedpecxxliefx Ab Eefd Clamping surface: 600 x 210 mm T-slots: 4 T-slot width: 12 mm Spindle speeds: 20 - 2000 rpm Speed range - vertical: 60 - 1200 rpm Speed range - horizontal: 95 - 1900 rpm Spindle speed steps: 12 Feed range: 10 - 500 mm/min Feed steps: 10 Spindle taper: MK 4 Quill stroke vertical: 60 mm Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Required space approx.: 0.9 x 1.05 x 1.55 m

Stanje: rabljeno, številka stroja/vozila: 2880, x-axis travel: 290 mm y-axis travel: 120 mm z-axis travel: 350 mm Table clamping surface: 690 x 175 mm Spindle taper: SK40 Number of spindle speeds: 17 Feed range: 42 - 680 mm/min Number of feed rates: 14 Hfedpfx Abocxxntj Eed Spindle speed range: 50 - 2240 rpm Approx. machine weight: 0.6 t Universal tool milling machine with swiveling vertical head +/- 90°, double-pole switchable spindle drive with clockwise and counter-clockwise rotation. The machine is equipped with handwheels on all 3 axes, rapid traverse via crank handle in the x-direction, electric feed in x-direction, feed rates adjustable via change gears, overhead arm for horizontal milling, three-position cam switch in x-direction for automated processes, emergency stop in the control panel, and main switch for safety.

Stanje: rabljeno, številka stroja/vozila: 2819-0517, x-axis travel: 300 mm y-axis travel: 300 mm z-axis travel: 400 mm (340 mm with apron) Clamping surface: 390 x 620 mm / chip tray Spindle speed: 40–2500 rpm Feed range: 0.2–3600 mm/min Rapid traverse: 4.0 m/min Control: Contour 3 – 3D Path Control System Spindle taper: SK40 Quill stroke: 60 mm Swiveling head +/-: 90° Spindle drive motor: 2.0 kW Total power requirement: 1.6 / 2.0 kW Machine weight approx.: 1.3 t Space requirement approx.: 1.8 x 1.8 x 1.8 m Hfedjcxxp Tspfx Ab Eed Universal milling machines from Deckel have proven themselves for decades in mold, tool, and machine construction. CNC-controlled tool milling machine with Contour 3 control, vertical head swivels +/- 90° with 60 mm quill stroke, horizontal spindle, feeds and rapid traverse on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop button, chip guard enclosure with chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 52326/08, x-travel: 250 mm y-travel: 150 mm z-travel: 305 mm Table clamping area: 600 x 210 mm Spindle speed range: 40 - 2000 rpm Number of spindle speeds: 16 Spindle taper: SK 40 Feed rate: 10 - 500 mm/min Hsdpfx Abocxxrvs Esfd Number of feed rates: 16 Vertical head swivels: +/- 90 degrees Total power requirement: 1.0 / 1.4 kW Machine weight approx.: 0.8 t Space requirement approx.: 1.0 x 1.25 x 0.85 m Universal Tool Milling Machine Type Deckel FP1 featuring: - Swiveling vertical spindle - Vertical head swiveling +/- 90° - Spindle taper SK40 - Automatic feeds - Pole-changing motor - Separate electrical cabinet with main switch.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, in Excellent Condition, CE Compliant Hsdpfxjxdi Ivo Ab Esfd Technical Data: >> Year of manufacture: 1992, Machine No. 2102-6209 >> Fixed angle table (freshly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle slide, adjustable by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, CE compliant, in very good condition. The machine exhibits minimal backlash and all spindles move smoothly. The milling machine operates very quietly even at maximum speeds. A special feature is that the electrical cabinet is connected to the machine via a plug, which makes transportation easier. In this newer FP1 model, the feed on all three axes is infinitely variable, and there is also rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can enter the dimensions and the machine will automatically approach them. This FP1 was used in a training workshop and was only occasionally operated. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout facilitates your work and delivers even higher accuracy. Take advantage of the opportunity to view and test this machine on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain active digital readout – Excellent condition, CE compliant!!! Technical Specifications: >> Year of manufacture: 1992 Machine No. 2203-8449 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Hydraulic drawbar system >> Weight approx. 1600 kg Accessories and Equipment: Hfodpfx Absu Tuk Hs Ejd >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Centralized electric lubrication unit >> Operating manual, spare parts diagrams About the machine: Offered is a Deckel FP4M Universal Milling Machine, active version, in excellent condition. The machine features minimal backlash and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine is equipped with hydraulic tool clamping. This FP4M was only used occasionally in a government facility for training purposes. On this newer FP4 model, the feed rates on all three axes are steplessly adjustable, and the machine features rapid traverse in every axis. A major advantage is the active 3-axis digital readout. With the Heidenhain traverse control, you can enter dimensions that the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1990, Macmon M 100 E universal milling machine with 2-axis Elesta-Heidenhain digital readout, from a training department. Features a fixed table and SK 40 spindle taper. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Hfjdorazzrjpfx Ab Esd

Stanje: rabljeno, Leto izdelave: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm Hsdpfx Aewwwr Ejb Eofd Table clamping surface 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Stanje: rabljeno, Leto izdelave: 1989, X-axis travel: 350 mm y-axis travel: 200 mm z-axis travel: 350 mm Table clamping surface: 700 x 280 mm Spindle taper: SK 40 Spindle speeds: 150 - 1660 rpm Feed rates: 25 - 285 mm/min Rapid traverse: 1 m/min Quill stroke: 80 mm Head swivels: +/- 45° Total power requirement: 3 kW Machine weight: approx. 1.2 t Machine dimensions (L x W x H): 1.27 x 1.1 x 1.65 m Hfjdpfxovzhidj Ab Eed Accessories: swivelling vertical head with extendable quill, fixed table, universal table, rotary indexing table 250 mm diameter, dividing head with 3-jaw chuck 135 mm diameter, tailstock, various milling arbors, drill chuck, coolant system

Stanje: rabljeno, Leto izdelave: 1978, X-travel 300 mm y-travel 160 mm z-travel 340 mm Clamping surface of table 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Hjdpfxowl N R Nj Ab Ejfd Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, digital readout on 3 axes HEIDENHAIN, counter bearing, various short and long milling arbors, various collets, original DECKEL tool cabinet