Naprave za ogrevanje in hlajenje nakup rabljenega (127)

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Ledpfog Ey T Esx Ah Dsah Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: rabljeno,

Stanje: dober (rabljeno), Autotherm Laodjuigrzepfx Ah Deh Type: Autotherm Tempering Unit AW 95-12/VK/E Autotherm Tempering Unit AW95-12_VK for water/glycol temperature control (completely overhauled) Autotherm Temperature Control Unit AW: For highly precise temperature control of water Autotherm tempering units are used in various industries, research, and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers, and heating chambers with tempered water, to maintain them at the desired temperature with high precision. Areas of application: - Mechanical engineering, e.g. solar and wind energy industry, textile industry - Plastics processing - Chemical and pharmaceutical industry - Paper manufacturing - Medical technology - Food industry - Research Tempering Unit Autotherm AKW AW95-12/VK Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to cooling water network required Rated power: 14.5 kW Dimensions: 600 mm x 840 mm x 910 mm Power supply: 400 Volt / 50 Hz 13400 Watt / 19.6 A / 5.1 bar Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data. All specifications without guarantee!) For further questions, we will be happy to assist you by phone.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated Ljdpfxjg Ey Ufj Ah Dsah - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: rabljeno, Hot runner control unit Vetter MC 712 L-P, 12 zones, 220 Volt Price: €2,850 Contact person: Mr. Rainer Eckerle Lajdpokt Uzkefx Ah Djh

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Ledsg Ey Rfopfx Ah Djah Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: rabljeno, Hot runner control unit Vetter MC 712, 12 zones, 230 Volts Price: €2,850 Lsdpjwgb T Sefx Ah Djah Contact: Mr. Rainer Eckerle

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg Ljdpfx Asftm Hroh Deah HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: rabljeno, Hot runner controller PSG 8, 8 zones, 230 Volt Price: €2,250 Contact: Mr. Rainer Eckerle Lajdpewgb Ngofx Ah Dsh

Stanje: novo, *Technical Standard Specification: Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return line of circulation and cooling water inlet - Reversing circuit for leak-stop operation (operable up to system shut-off temperature) - Ball valves in supply and return - Automatic temperature-dependent system shut-off - Fill duration monitoring and aqua timer - Adjustable pump run-on - Adjustable temperature alarm - Options: interface cable - Control unit SBCmini with relay for collective alarm, 230V, at the rear of the controller on terminal - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater on heating contactor - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Flow rate (max) 27 l/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weights / Colours Dimensions (L/W/H): 600 mm x 240 mm x 493 mm (excl. connections) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey, Front door: RAL 5015 sky blue *Connections: Ledpfx Asfnvwqsh Deah Circulation medium: socket G1/2" Cooling water: socket G3/8" *This device is compliant with European directives. Other guidelines and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: rabljeno, Hot runner controller Xintech 16 zones 220 Volt Lodpfswgb Icox Ah Djah Price: €3,450 Contact person: Mr. Rainer Eckerle

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Ljdpfx Asfnvvijh Deah Design: Submersible pump / Peripheral impeller *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.*

Leto izdelave: 2017, Stanje: dober (rabljeno), Chiller Engie SPF 204 DL, water-cooled refrigeration unit, in combination with dry cooler or cooling tower, 209 kW cooling capacity Year of manufacture: 12/2017 Price: €14,500 Contact person: Mr. Rainer Eckerle Lasdeg T H Hrepfx Ah Djh

Leto izdelave: 2013, Stanje: dober (rabljeno), Refrigeration unit IKS IPE 121, air-cooled, 47 kW cooling capacity, with pump and tank Year of manufacture: 2013 Price: €10,400 Contact: Mr. Rainer Eckerle Lodpjg N I Nlefx Ah Djah

Leto izdelave: 2002, Stanje: rabljeno,

Leto izdelave: 2001, Stanje: rabljeno, Cooling unit YORK YCSA 08 M+T, air-cooled, 8 kW cooling capacity (7°C / 30°C), year of manufacture: 2001 - 0 operating hours, price: €2,950. Contact person: Mr. Rainer Eckerle. Laodpfx Ahowkqxo Djh

Leto izdelave: 2007, Stanje: dober (rabljeno), Chiller GWK Weco 48 AZX 48 kW air-cooled, cooling capacity with pump and tank, year of manufacture 2007, price: €8,500, contact person: Mr. Rainer Eckerle Laedod H Rd Ispfx Ah Djh

Leto izdelave: 2008, Stanje: dober (rabljeno), Temperature control unit Regloplas 90 XL M 90°C 21.5 kW Year of manufacture: 2008 Ljdsh Uubhspfx Ah Doah Price: €2,150 Contact: Mr. Rainer Eckerle

Leto izdelave: 2017, Stanje: dober (rabljeno), Single Compact K-160-9-24, 160°C medium water, 11 kW Ljdjrupr Dopfx Ah Doah Year of manufacture: 2017 Price: €4,950 Contact: Mr. Rainer Eckerle

Leto izdelave: 2011, Stanje: dober (rabljeno), Air-cooled chiller Hitema ESE 003, 4 kW cooling capacity, with pump and tank Year of manufacture: 2011 Price: €2,950 Contact: Mr. Rainer Eckerle Lodpfeh N Sndsx Ah Djah

Leto izdelave: 2017, Stanje: dober (rabljeno), HB Therm 160 Z1 Series 5 Temperature Control Unit, Water, 160°C, 9 kW, with Recent Service! Year of Manufacture: 2017-2018 Price: €4,950 Lajdpfx Ahokn Enuo Dsh Contact: Mr. Rainer Eckerle

Leto izdelave: 2017, Stanje: dober (rabljeno), Single Adv. WP5 180-12-220 water, 180°C 15 kW Zero production hours! Year of manufacture: 2023 Price: €8,500 Contact person: Mr. Rainer Eckerle Ljdpfx Ahsrupt No Deah

Leto izdelave: 2017, Stanje: dober (rabljeno), HB Therm 140 Z1 Series 5 Temperature Control Unit, water-based, 140°C, 9 kW, with new service! Lasdpfekn Elnsx Ah Deh Year of manufacture: 2017-2018 Price: €4,650 Contact person: Mr. Rainer Eckerle

Leto izdelave: 2018, Stanje: dober (rabljeno), HB Temperiergerät Therm 160 Z2 Serie 5, Wasser, 160°C, 17 kW Baujahr: 2017-2018 Laedpfx Aok Tapwjh Deh Preis: 5.950 € Ansprechpartner: Herr Rainer Eckerle

Leto izdelave: 2018, Stanje: dober (rabljeno), HB Therm 180 Z2 Series 5 Temperature Control Unit, Water, 180°C, 17 kW - New Service! Ledpjk Tap Tsfx Ah Deah Year of manufacture: 2017-2018 Price: €7,950 Contact person: Mr. Rainer Eckerle