Naprave za ogrevanje in hlajenje nakup rabljenega (158)

Stanje: rabljeno, Naprava za regulacijo vročega kanala Feller MCS 04 4 4x 230 Volt Letnik izdelave: Cena: 1.250 evrov Itjdpfxexwcdwo Adkjd Kontaktna oseba: gospod Rainer Eckerle

Stanje: rabljeno, Hot runner controller Xintech 16 zones 220 Volt Price: €3,450 Itjdpfxjwgb Ico Adksd Contact person: Mr. Rainer Eckerle

Stanje: rabljeno,

Stanje: rabljeno, Hot runner controller PSG 8, 8 zones, 230 Volt Price: €2,250 Contact: Mr. Rainer Eckerle Itjdpfxowgb Nge Adked

Stanje: rabljeno, Hot runner control unit Vetter MC 712 L-P, 12 zones, 220 Volt Price: €2,850 Contact person: Mr. Rainer Eckerle Itodpfskt Uzkox Adksd

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1916180-002656, - Tip: PSG ProfiTEMP+ 66 con - Leto izdelave: 2019 - Serijska številka: 1916180-002656 - Napajanje: 230 VAC (3~ / N / PE) 50/60Hz - Moč: max. 43 kW, 3x63 A Iodpjxuk Edefx Adkotd - Priključki: XS3 RJ45, XS1 RS485 - Stanje: Uporabljeno samo za testne modele - Znamka: PSG Plastic Service GmbH - Dodatki: 8x kabel s 24-pinskim vtičem in priročniki

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays Iodpfx Adeg Ey T Ejkjtd - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: Itedpjg Ey Ufofx Adkjd - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) -Heating control via solid-state relay Itedpfx Adeg Ey Rfskjd -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg Isdpfx Adeftm Hrekotd HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: novo, *Technical Standard Specification: Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C Iodpfx Aofnvwqodkstd *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return line of circulation and cooling water inlet - Reversing circuit for leak-stop operation (operable up to system shut-off temperature) - Ball valves in supply and return - Automatic temperature-dependent system shut-off - Fill duration monitoring and aqua timer - Adjustable pump run-on - Adjustable temperature alarm - Options: interface cable - Control unit SBCmini with relay for collective alarm, 230V, at the rear of the controller on terminal - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater on heating contactor - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Flow rate (max) 27 l/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weights / Colours Dimensions (L/W/H): 600 mm x 240 mm x 493 mm (excl. connections) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey, Front door: RAL 5015 sky blue *Connections: Circulation medium: socket G1/2" Cooling water: socket G3/8" *This device is compliant with European directives. Other guidelines and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: dober (rabljeno), Leto izdelave: 2009, Tooltemp TT 390 A 360° Olje 18 kW Ijdpfoxwch Aex Adkstd Leto izdelave: 2009 Cena: 2.850 € Kontaktna oseba: g. Rainer Eckerle

Leto izdelave: 2008, stanje: dober (rabljeno), Temperature control unit Regloplas 90 XL M 90°C 21.5 kW Year of manufacture: 2008 Iedpjh Uubhefx Adkjtd Price: €2,150 Contact: Mr. Rainer Eckerle

Leto izdelave: 2017, stanje: dober (rabljeno), Single Compact K-160-9-24, 160°C medium water, 11 kW Year of manufacture: 2017 Isdpfx Aorupr Dedkotd Price: €4,950 Contact: Mr. Rainer Eckerle

Leto izdelave: 2001, stanje: dober (rabljeno), HB Therm Temperature Control Unit 140 U1 Series 4 Water, 140°C 9 kW Year of manufacture: 2001–2005, overhauled! Price: €1,650 Itjdpewl Ingefx Adked Contact person: Mr. Rainer Eckerle

Stanje: dober (rabljeno), Leto izdelave: 2017,

Leto izdelave: 2017, stanje: dober (rabljeno), HB Therm 160 Z1 Series 5 Temperature Control Unit, Water, 160°C, 9 kW, with Recent Service! Year of Manufacture: 2017-2018 Price: €4,950 Itjdpfxskn Enus Adked Contact: Mr. Rainer Eckerle

Leto izdelave: 2017, stanje: dober (rabljeno), HB Therm 140 Z1 Series 5 Temperature Control Unit, water-based, 140°C, 9 kW, with new service! Isdpfx Adekn Elneketd Year of manufacture: 2017-2018 Price: €4,650 Contact person: Mr. Rainer Eckerle

Leto izdelave: 2018, stanje: dober (rabljeno), HB Temperiergerät Therm 160 Z2 Serie 5, Wasser, 160°C, 17 kW Baujahr: 2017-2018 Preis: 5.950 € Itjdok Tapwopfx Adked Ansprechpartner: Herr Rainer Eckerle

Leto izdelave: 2018, stanje: dober (rabljeno), HB Therm 180 Z2 Series 5 Temperature Control Unit, Water, 180°C, 17 kW - New Service! Year of manufacture: 2017-2018 Price: €7,950 Itedpfx Aek Tap Tedkod Contact person: Mr. Rainer Eckerle

Leto izdelave: 2013, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, V prodaji so temperirne naprave Regloplas P140S, 10 kosov, cena je za posamezen kos. - Vmesnik 20 mA - Brezkontaktno merjenje pretoka Iedpfx Asx Ib Niedkjtd - Priključek za zunanji senzor Sn2 - Številne dodatne možnosti Medij: voda Temperatura dovoda: max. 140°C Grelnik: 8 kW Hladilna zmogljivost: 33 kW Tip črpalke: SM22

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), air-cooled process chiller: Refrigerant R32 Cooling capacity 72 kW at 7/12°C, internal P3 pump, integrated 410 l buffer tank, winter package for outdoor installation rated for ambient temperatures down to -25°C, includes variable-speed fans Itedpjf H A Eyjfx Adksd generous Dixell display with protective cover,

Leto izdelave: 2023, stanje: novo, Chiller with refrigerant R454B < 500 GWP. Cooling capacity according to Eurovent: 34 kW. Isdpfx Ajmhgg Rjdkstd Internal pump, internal tank, coaxial evaporator, winter package for operation down to ambient temperatures of -25°C, internal bypass. Delivery time approx. 6 weeks. Also available with different cooling capacities.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, PLANER-HLADILNA NAPRAVA 290 kW – 2 ločena hladilna kroga, cevni izmenjevalnik, R32 Hladilna moč: 290 kW pri 7/12°C in 35°C temperaturi okolice Cevni izparjevalnik za učinkovito prenos toplote in kompaktno zasnovo Hladilno sredstvo z nizkim GWP R32 Štirje kompresorji v dveh ločenih hladilnih krogih za visoko obratovalno varnost in prilagodljivo razporeditev obremenitev Tih način delovanja zaradi optimizacije hrupa Itsdou Au I Tspfx Adked Popolnoma zaprto ohišje kompresorjev za učinkovito zaščito, enostavno vzdrževanje in zmanjšan hrup Zimski paket do temperature okolice -20°C Idealno primerno za industrijske procese.

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), Chiller unit SBS 330, year 2020. Refrigeration system from our rental fleet for sale. The unit will receive a new maintenance service and leak test upon takeover. Cooling capacity at 7/12°C and 35°C ambient temperature: 320kW. The chiller unit is equipped with compressor soundproof enclosures, winter package, low- and high-pressure gauges, low water configuration, electronic expansion valves, X-Web, and flange connections. Ijdpfx Aei Ab N Hjdketd