Temperature control unit

Tool-Temp TT-118 K

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Four-Sided Planer Weinig Profimat 23 Fortec Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle arrangement: Bottom: 7.5 kW Right Left: 11 kW Csdpfoumxqrjx Afwjhd Top: 7.5 kW Top: 5.5 kW Bottom: 5.5 kW Pneumatic pressure rollers Feed speed adjustable via variator Drive via cardan shafts CE certified

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.* Chodpfx Ajfnvviofwsd

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 11.337 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 234917, vpenjalna sila: 1.600 kN, premer vijaka: 30 mm, Oprema: dokumentacija / priročnik, ENGEL eMotion 160, iz proizvodnje v čisti sobi, z le 11.300 urami delovanja, v skoraj novem stanju. Stroj je bil uporabljen za proizvodnjo 64-kanalnih pipet pri podjetju NYPRO (Jabil) v Knittlingenu in je v skoraj novem stanju. Gre za zadnjo razpoložljivo napravo iz skupne zaloge, ki je prvotno obsegala 90 strojev. Prvotno je bila namenjena drugi tovarni NYPRO, vendar je bila v okviru prestavitve lokacije zdaj na voljo za prodajo. Potrditev naročila podjetja ENGEL podjetju NYPRO je vidna v dokumentih. Prvotna nova cena je bila približno 330.000 €, vključno z dvigalom. Opozorilo: Postavke 10.0064 do 10.0070 eFlomo niso vključene v obseg dobave! To ni bilo izvedeno. Vse ostalo, kot je navedeno v ponudbi, je v celoti vgrajeno v stroj. Chjdpfx Aewb Dl Tefwjd Tehnične podatke vam na zahtevo z veseljem posredujem. V ceno je vključeno: razstavitev dvigala in pakiranje na dve evropaleti. Prav tako izvoz stroja iz čiste sobe in nakladanje na vaš tovornjak s 15-tonskim viličarjem. Če ste zainteresirani ali imate dodatna vprašanja, sem vam na voljo kadar koli. Stroj se nahaja pri podjetju Nypro v bližini Karlsruha in ga lahko tam kadarkoli ogledate. Dostava v nekaj dneh. Na spodnji strani v dokumentih lahko vidite potrditev naročila podjetja ENGEL podjetju NYPRO!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 100 h, Gebrauchte ProJet SD6000 3D-Druckmaschine mit Stereolithografie-Technologie (SLA). Die Maschine wurde während ihrer bisherigen Lebensdauer nur äußerst wenig genutzt, da sie am AMRC Forschungszentrum der University of Sheffield („Factory of the Future“) installiert und dort lediglich sporadisch für Forschungsprojekte eingesetzt wurde. Seriennummer: 10311178101 Baujahr: 2014 MASCHINENKONSTRUKTION & AUSSTATTUNG Die ProJet 6000 HD SLA 3D bietet Stereolithographie-Qualität auf kompaktem Raum. Diese 3D-Drucker vereinen die einzigartigen Möglichkeiten der SLA-Technologie, optimiert für Kosteneffizienz und eine breite Materialverfügbarkeit, in einem platzsparenden Design. SLA-gedruckte Bauteile zeichnen sich durch herausragende Maßgenauigkeit und exzellente Oberflächenqualität aus. Hohe Flexibilität Präziser 3D-Druck feiner Details mit einer breiten Auswahl an leistungsoptimierten Werkstoffen, die die Eigenschaften herkömmlicher Kunststoffe erreichen oder übertreffen. Einfache Umrüstung durch wechselbare Materialmodule für flexible Einsatzmöglichkeiten. • Zwei Bauplattformen • Ein Material-Förderwagen • Projet TM6000 Druckwanne • Reinigungsstation • Aushärtestation Codetvfwkepfx Afwshd Druckmodi: High Definition, Ultra High Definition Auflösung: -HD: 0,125 mm, Schichtstärke 0,125 mm -Ultra-HD: 0,125 mm, Schichtstärke 0,10 mm Nutzbares Bauvolumen: -kurz: 250 x 250 x 50 mm -mittel: 250 x 250 x 125 mm -hoch: 250 x 250 x 250 mm Genauigkeit: 0,025 – 0,05 mm pro 25,4 mm Bauteilabmessung VORTEILE: - Stereolithografie-Technologie (SLA) - Maximales Bauvolumen (B x T x H): 250 x 250 x 250 mm - Höchste Präzision und Maßhaltigkeit - Austauschbare Materialfördermodule (MDMs) - Zwei Laserspotgrößen pro Schicht – keine Kompromisse bei Geschwindigkeit oder Detailtreue - Exakte Linienführung in X- und Y-Richtung für präzise Kurvendefinition - Branchenführende 3D Sprint-Software für Dateiaufbereitung und Produktionsablauf - Cloud-Anbindung für vorausschauende und schnelle Wartung mit 3D Connect

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 7.148 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 252315, vpenjalna sila: 17.000 kN, premer vijaka: 120 mm, delovna prostornina: 7.729 cm³, minimalna višina orodja: 800 mm, izmetalna sila: 230.000 N, hod izmetalca: 300 mm, odmični hod: 2.550 mm, dolžina plošče: 2.420 mm, širina plošče: 2.170 mm, pritisk: 2.300 letvica, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, For sale: a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and items with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1,700 tonnes) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection rate: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum platen spacing: 3,350 mm - Platen dimensions: 2,420 × 2,170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive energy-saving servo hydraulics - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pullers - Ceramic heaters - Cylinder insulation - Ecograph / ecobalance system - MES interface preparation – EUROMAP 77 / OPC UA - Full set of Euromap interfaces - Advanced mold cooling - Special configuration for automotive industry - Documentation in Polish - Special industrial ENGEL painting Set includes ENGEL VIPER 60 RC300 Integrated robot Complete production automation integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm Chsdpfx Afsy Tuhiewed - Y-axis stroke: 2,600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 belt conveyor included - Full set of safety guards

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Proizvajalec: Henrik WINTER HOLZTECHNIK GmbH (Leipzig, Nemčija) Model / tip: SAWMAX 600 Leto proizvodnje: 2014 Serijska številka: 130705-28 Napajanje: 3×400 V, 50 Hz Maks. moč: 1,69 kW Masa: 650 kg Chodpfx Afew R E Slewsd Certifikat: CE

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: 180635, vhodna napetost: 400 V, skupna višina: 1.470 mm, skupna širina: 480 mm, skupna dolžina: 1.210 mm, moč: 4 kW (5,44 KM), premer lijaka: 310 mm, Na prodaj je visokokakovosten rezalni mlin znamke Wanner Technik, model C17.31sv. Gre za sodoben agregat iz leta 2018, dobro vzdrževan in takoj pripravljen za uporabo. Chsdpfey Hklkjx Afwed Proizvajalec: Wanner Technik GmbH Model: C17.31sv Serijska številka: 180 635 Letnik: 07/2018 Moč: 4,0 kW Napetost: 400 V Frekvenca: 50 Hz Tok: 8,4 A Na željo je mogoče organizirati prevoz in nakladanje po vsej Evropi – proti doplačilu. Cene so navedene brez DDV. Ogled možen po predhodnem dogovoru. Kontaktirajte nas – naše osebje vam z veseljem pomaga. Možen je tudi odkup ali menjava! Prodaja in odkup strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV IN OSTALO. Gjbn N Ay Dowza Dxogoil Potrebujete kakovosten, a ugoden kovinskoobdelovalni stroj za svojo proizvodnjo ali želite prodati svoj stroj? Za več informacij ali kontakte obiščite našo spletno stran.

Stanje: dober (rabljeno), Leto izdelave: 2023, Handling device Sepro S5-25 DI Visual 3 x=700 mm y vert. (telescopic) = 1400 mm Z=3500 mm (R1 + R2) R1 Year of manufacture: 2023 Chodpeuqll Defx Afwed Price: 27,500 Euro Contact person: Mr. Rainer Eckerle

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S4 1TT33 3250, skupna širina: 4.340 mm, skupna višina: 2.775 mm, skupna dolžina: 5.145 mm, delovna širina: 1.350 mm, višina obdelovanca (maks.): 16 mm, Viet S4 calibrating and sanding machine. * 1st sanding unit: Longitudinal T60 E IPP HP DU; Belts 1380x3250 mm, Driven by 15 kW inverter motor * 2nd sanding unit: Cross T60 ET HP DUO; Belts 150x8700 mm, Driven by 15 kW inverter motor * 3rd sanding unit: Cross T60 ET HP DUO; Belts 150x8700 mm, Driven by 15 kW inverter motor Variable feed belt speed: 2–20 m/min Complete extraction system included. Cedpfxjutdrho Afwshd

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Codpfxjg Ey T Eo Afwjhd Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.